Hi York,
Please see explanation inline.
-----Original Message----- From: York Sun [mailto:yorksun@freescale.com] Sent: Saturday, December 05, 2015 1:25 AM To: Tang Yuantian-B29983 Yuantian.Tang@freescale.com Cc: u-boot@lists.denx.de; sinan@writeme.com Subject: Re: [PATCH v5] arm: Add sata support on Layerscape ARMv8 board
On 12/03/2015 06:47 PM, Tang Yuantian-B29983 wrote:
Hi York,
Please see my explanation inline.
-----Original Message----- From: York Sun [mailto:yorksun@freescale.com] Sent: Friday, December 04, 2015 12:27 AM To: Tang Yuantian-B29983 Yuantian.Tang@freescale.com Cc: u-boot@lists.denx.de; sinan@writeme.com Subject: Re: [PATCH v5] arm: Add sata support on Layerscape ARMv8 board
On 12/01/2015 07:27 PM, Yuantian.Tang@freescale.com wrote:
From: Tang Yuantian Yuantian.Tang@freescale.com
Freescale ARM-based Layerscape contains a SATA controller which comply with the serial ATA 3.0 specification and the AHCI 1.3
specification.
This patch adds SATA feature on ls2080aqds, ls2080ardb and ls1043aqds boards.
Signed-off-by: Tang Yuantian Yuantian.Tang@freescale.com
v5:
- re-organize the code
v4:
- rebase to lastest git tree
- add another ARMv8 platform which is ls1043aqds
v3:
- rename ls2085a to ls2080a
- rebase to the latest git tree
- replace the magic number with micro variable
v2:
- rebase to the latest git tree
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 43
++++++++++++++++++++++
.../include/asm/arch-fsl-layerscape/immap_lsch3.h | 4 ++ arch/arm/include/asm/arch-fsl-layerscape/soc.h | 31
++++++++++++++++
include/configs/ls1043aqds.h | 17 +++++++++ include/configs/ls2080aqds.h | 18 +++++++++ include/configs/ls2080ardb.h | 18 +++++++++ 6 files changed, 131 insertions(+)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c index 8896b70..574ffc4 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c @@ -6,6 +6,8 @@
#include <common.h> #include <fsl_ifc.h> +#include <ahci.h> +#include <scsi.h> #include <asm/arch/soc.h> #include <asm/io.h> #include <asm/global_data.h> @@ -120,7 +122,44 @@ void fsl_lsch3_early_init_f(void) erratum_a009203(); }
Yuantian,
Please help me understand below.
+#ifdef CONFIG_SCSI_AHCI_PLAT +int sata_init(void) +{
- struct ccsr_ahci __iomem *ccsr_ahci;
- ccsr_ahci = (void *)CONFIG_SYS_SATA2;
- out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
- out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
You didn't set pp2c or pp3c. Is it because the default values are OK or something else?
Those settings of registers vary from soc to soc. If the default value will be
used if the register is not updated explicitly.
If you put the macros for each SoC, you probably can use one function for all. You only want to keep them separated if they have not much in common.
I was trying to use one function for all, but I found separating them is better. Take ls1043a and ls2080a as an example, ls2080a has two controllers, while ls1043a has one. Ls2080a has two registers that need to be updated while ls1043a has four. A lot of #ifdef are needed if we unify them, not mention that in the future, changing one of the platforms' register will affect the other. Maybe I am not thinking it through. If you can give me more detail that viable, I can give a try.
Speaking of this, I got new information from validation team about giving a
new value to PTC register.
So please hold this patch for a while, I will update it in next version.
- ccsr_ahci = (void *)CONFIG_SYS_SATA1;
- out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
- out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
- ahci_init((void __iomem *)CONFIG_SYS_SATA1);
You only call ahci_init() here but not above. Is SATA2 active?
AHCI SATA driver only supports one SATA port. On ls2080a we have two
ports, so we have to choice one. In this case I choice the first one which is SATA1.
This should be put into comment, or README if you have one.
This phenomenon is not LS platform specific, that's uboot's issue which needs another patch to fix. I think uboot know that and choice to not fix it because for uboot supporting two sata port is not that significant. It is just like that uboot doesn't support local sata and PCIe sata simutaniously.
If a comment is needed, it would be better to put it in our own README (in this case, ls2080a) document.
Regards, Yuantian
York