Add NOR secure boot target. Also enable sec init.
Signed-off-by: Vinitha Pillai vinitha.pillai@nxp.com Signed-off-by: Sumit Garg sumit.garg@nxp.com ---
Changes in v2: Split patches logically from 2 to 3.
board/freescale/ls1046aqds/MAINTAINERS | 4 ++++ board/freescale/ls1046aqds/ls1046aqds.c | 18 ++++++++++++++++++ configs/ls1046aqds_SECURE_BOOT_defconfig | 29 +++++++++++++++++++++++++++++ 3 files changed, 51 insertions(+) create mode 100644 configs/ls1046aqds_SECURE_BOOT_defconfig
diff --git a/board/freescale/ls1046aqds/MAINTAINERS b/board/freescale/ls1046aqds/MAINTAINERS index b4549ae..6737d55 100644 --- a/board/freescale/ls1046aqds/MAINTAINERS +++ b/board/freescale/ls1046aqds/MAINTAINERS @@ -8,3 +8,7 @@ F: configs/ls1046aqds_nand_defconfig F: configs/ls1046aqds_sdcard_ifc_defconfig F: configs/ls1046aqds_sdcard_qspi_defconfig F: configs/ls1046aqds_qspi_defconfig + +M: Sumit Garg sumit.garg@nxp.com +S: Maintained +F: configs/ls1046aqds_SECURE_BOOT_defconfig diff --git a/board/freescale/ls1046aqds/ls1046aqds.c b/board/freescale/ls1046aqds/ls1046aqds.c index 8c18538..a418590 100644 --- a/board/freescale/ls1046aqds/ls1046aqds.c +++ b/board/freescale/ls1046aqds/ls1046aqds.c @@ -20,6 +20,7 @@ #include <fsl_csu.h> #include <fsl_esdhc.h> #include <fsl_ifc.h> +#include <fsl_sec.h> #include <spl.h>
#include "../common/vid.h" @@ -242,6 +243,23 @@ int board_init(void) if (adjust_vdd(0)) printf("Warning: Adjusting core voltage failed.\n");
+#ifdef CONFIG_SECURE_BOOT + /* In case of Secure Boot, the IBR configures the SMMU + * to allow only Secure transactions. + * SMMU must be reset in bypass mode. + * Set the ClientPD bit and Clear the USFCFG Bit + */ + u32 val; + val = (in_le32(SMMU_SCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK); + out_le32(SMMU_SCR0, val); + val = (in_le32(SMMU_NSCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK); + out_le32(SMMU_NSCR0, val); +#endif + +#ifdef CONFIG_FSL_CAAM + sec_init(); +#endif + return 0; }
diff --git a/configs/ls1046aqds_SECURE_BOOT_defconfig b/configs/ls1046aqds_SECURE_BOOT_defconfig new file mode 100644 index 0000000..2640dc8 --- /dev/null +++ b/configs/ls1046aqds_SECURE_BOOT_defconfig @@ -0,0 +1,29 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS1046AQDS=y +CONFIG_DM_SPI=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart" +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, SECURE_BOOT" +CONFIG_BOOTDELAY=10 +CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_GREPENV=y +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_I2C=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_DM=y +CONFIG_SPI_FLASH=y +CONFIG_SYS_NS16550=y +CONFIG_FSL_DSPI=y +CONFIG_RSA=y