Subject: Re: [PATCH] imx: imx8qxp_mek: update README
Hi Peng,
On Wed, Jan 8, 2020 at 10:33 PM Peng Fan peng.fan@nxp.com wrote:
The ipg clk patch needs to be reverted for now. Anyway the log as below:
Which commit are you referring to? Can you send a revert? Is this revert needed for booting this board?
U-Boot SPL 2020.01-00025-gedb89b239c-dirty (Jan 08 2020 - 09:50:22 +0800) Normal Boot WDT: Not found! Trying to boot from MMC2_2 Load image from MMC/SD 0x46800
U-Boot 2020.01-00025-gedb89b239c-dirty (Jan 08 2020 - 09:50:22 +0800)
I don't see edb89b239c in U-Boot mainline.
Could you please make sure you use the latest U-Boot mainline in your test?
U-Boot SPL 2020.01-00243-g21aede21b0 (Jan 09 2020 - 10:01:31 +0800) Normal Boot WDT: Not found! Trying to boot from MMC2_2 Load image from MMC/SD 0x46800
U-Boot 2020.01-00243-g21aede21b0 (Jan 09 2020 - 10:01:31 +0800)
CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 20C
Model: Freescale i.MX8QXP MEK Board: iMX8QXP MEK Build: SCFW 550f3079, SECO-FW d7523fe8, ATF f900faa Boot: SD1 DRAM: 3 GiB Failed to enable ipg clk MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... *** Warning - bad CRC, using default environment
In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 Net: Failed to enable ipg clk
Warning: ethernet@5b040000 using MAC address from ROM eth0: ethernet@5b040000 Hit any key to stop autoboot: 0
Rebased to tom's master branch.
Regards, Peng.
Thanks