From: Marcel Ziswiler marcel.ziswiler@toradex.com
Synchronise device tree with linux v6.0-rc1.
Signed-off-by: Marcel Ziswiler marcel.ziswiler@toradex.com
---
Changes in v2: - imxrt1050: Re-added DDR timings aka semc node as pointed out by Fabio. Thanks!
arch/arm/dts/imxrt1050-evk-u-boot.dtsi | 155 ++++++++++-- arch/arm/dts/imxrt1050-evk.dts | 257 +++----------------- arch/arm/dts/imxrt1050-pinfunc.h | 2 +- arch/arm/dts/imxrt1050.dtsi | 168 ++++++------- include/dt-bindings/clock/imxrt1050-clock.h | 9 +- 5 files changed, 248 insertions(+), 343 deletions(-)
diff --git a/arch/arm/dts/imxrt1050-evk-u-boot.dtsi b/arch/arm/dts/imxrt1050-evk-u-boot.dtsi index 617cece448a..7db53b19c2f 100644 --- a/arch/arm/dts/imxrt1050-evk-u-boot.dtsi +++ b/arch/arm/dts/imxrt1050-evk-u-boot.dtsi @@ -4,6 +4,8 @@ * Author(s): Giulio Benetti giulio.benetti@benettiengineering.com */
+#include <dt-bindings/memory/imxrt-sdram.h> + / { chosen { u-boot,dm-spl; @@ -15,6 +17,52 @@
soc { u-boot,dm-spl; + + semc@402f0000 { + compatible = "fsl,imxrt-semc"; + clocks = <&clks IMXRT1050_CLK_SEMC>; + pinctrl-0 = <&pinctrl_semc>; + pinctrl-names = "default"; + reg = <0x402f0000 0x4000>; + status = "okay"; + u-boot,dm-spl; + + /* + * Memory configuration from sdram datasheet IS42S16160J-6BLI + */ + fsl,sdram-mux = /bits/ 8 <MUX_A8_SDRAM_A8 + MUX_CSX0_SDRAM_CS1 + 0 + 0 + 0 + 0>; + fsl,sdram-control = /bits/ 8 <MEM_WIDTH_16BITS + BL_8 + COL_9BITS + CL_3>; + fsl,sdram-timing = /bits/ 8 <0x2 + 0x2 + 0x9 + 0x1 + 0x5 + 0x6 + + 0x20 + 0x09 + 0x01 + 0x00 + + 0x04 + 0x0A + 0x21 + 0x50>; + + bank1: bank@0 { + fsl,base-address = <0x80000000>; + fsl,memory-size = <MEM_SIZE_32M>; + u-boot,dm-spl; + }; + }; }; };
@@ -50,7 +98,7 @@ u-boot,dm-spl; };
-&gpt1 { +&gpt { u-boot,dm-spl; };
@@ -58,33 +106,108 @@ u-boot,dm-spl; };
-&semc { - u-boot,dm-spl; - - bank1: bank@0 { - u-boot,dm-spl; - }; -}; - &iomuxc { u-boot,dm-spl;
imxrt1050-evk { u-boot,dm-spl; - pinctrl_lpuart1: lpuart1grp { - u-boot,dm-spl; - };
pinctrl_semc: semcgrp { - u-boot,dm-spl; - }; - - pinctrl_usdhc0: usdhc0grp { + fsl,pins = < + MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00 + 0xf1 /* SEMC_D0 */ + MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01 + 0xf1 /* SEMC_D1 */ + MXRT1050_IOMUXC_GPIO_EMC_02_SEMC_DA02 + 0xf1 /* SEMC_D2 */ + MXRT1050_IOMUXC_GPIO_EMC_03_SEMC_DA03 + 0xf1 /* SEMC_D3 */ + MXRT1050_IOMUXC_GPIO_EMC_04_SEMC_DA04 + 0xf1 /* SEMC_D4 */ + MXRT1050_IOMUXC_GPIO_EMC_05_SEMC_DA05 + 0xf1 /* SEMC_D5 */ + MXRT1050_IOMUXC_GPIO_EMC_06_SEMC_DA06 + 0xf1 /* SEMC_D6 */ + MXRT1050_IOMUXC_GPIO_EMC_07_SEMC_DA07 + 0xf1 /* SEMC_D7 */ + MXRT1050_IOMUXC_GPIO_EMC_08_SEMC_DM00 + 0xf1 /* SEMC_DM0 */ + MXRT1050_IOMUXC_GPIO_EMC_09_SEMC_ADDR00 + 0xf1 /* SEMC_A0 */ + MXRT1050_IOMUXC_GPIO_EMC_10_SEMC_ADDR01 + 0xf1 /* SEMC_A1 */ + MXRT1050_IOMUXC_GPIO_EMC_11_SEMC_ADDR02 + 0xf1 /* SEMC_A2 */ + MXRT1050_IOMUXC_GPIO_EMC_12_SEMC_ADDR03 + 0xf1 /* SEMC_A3 */ + MXRT1050_IOMUXC_GPIO_EMC_13_SEMC_ADDR04 + 0xf1 /* SEMC_A4 */ + MXRT1050_IOMUXC_GPIO_EMC_14_SEMC_ADDR05 + 0xf1 /* SEMC_A5 */ + MXRT1050_IOMUXC_GPIO_EMC_15_SEMC_ADDR06 + 0xf1 /* SEMC_A6 */ + MXRT1050_IOMUXC_GPIO_EMC_16_SEMC_ADDR07 + 0xf1 /* SEMC_A7 */ + MXRT1050_IOMUXC_GPIO_EMC_17_SEMC_ADDR08 + 0xf1 /* SEMC_A8 */ + MXRT1050_IOMUXC_GPIO_EMC_18_SEMC_ADDR09 + 0xf1 /* SEMC_A9 */ + MXRT1050_IOMUXC_GPIO_EMC_19_SEMC_ADDR11 + 0xf1 /* SEMC_A11 */ + MXRT1050_IOMUXC_GPIO_EMC_20_SEMC_ADDR12 + 0xf1 /* SEMC_A12 */ + MXRT1050_IOMUXC_GPIO_EMC_21_SEMC_BA0 + 0xf1 /* SEMC_BA0 */ + MXRT1050_IOMUXC_GPIO_EMC_22_SEMC_BA1 + 0xf1 /* SEMC_BA1 */ + MXRT1050_IOMUXC_GPIO_EMC_23_SEMC_ADDR10 + 0xf1 /* SEMC_A10 */ + MXRT1050_IOMUXC_GPIO_EMC_24_SEMC_CAS + 0xf1 /* SEMC_CAS */ + MXRT1050_IOMUXC_GPIO_EMC_25_SEMC_RAS + 0xf1 /* SEMC_RAS */ + MXRT1050_IOMUXC_GPIO_EMC_26_SEMC_CLK + 0xf1 /* SEMC_CLK */ + MXRT1050_IOMUXC_GPIO_EMC_27_SEMC_CKE + 0xf1 /* SEMC_CKE */ + MXRT1050_IOMUXC_GPIO_EMC_28_SEMC_WE + 0xf1 /* SEMC_WE */ + MXRT1050_IOMUXC_GPIO_EMC_29_SEMC_CS0 + 0xf1 /* SEMC_CS0 */ + MXRT1050_IOMUXC_GPIO_EMC_30_SEMC_DA08 + 0xf1 /* SEMC_D8 */ + MXRT1050_IOMUXC_GPIO_EMC_31_SEMC_DA09 + 0xf1 /* SEMC_D9 */ + MXRT1050_IOMUXC_GPIO_EMC_32_SEMC_DA10 + 0xf1 /* SEMC_D10 */ + MXRT1050_IOMUXC_GPIO_EMC_33_SEMC_DA11 + 0xf1 /* SEMC_D11 */ + MXRT1050_IOMUXC_GPIO_EMC_34_SEMC_DA12 + 0xf1 /* SEMC_D12 */ + MXRT1050_IOMUXC_GPIO_EMC_35_SEMC_DA13 + 0xf1 /* SEMC_D13 */ + MXRT1050_IOMUXC_GPIO_EMC_36_SEMC_DA14 + 0xf1 /* SEMC_D14 */ + MXRT1050_IOMUXC_GPIO_EMC_37_SEMC_DA15 + 0xf1 /* SEMC_D15 */ + MXRT1050_IOMUXC_GPIO_EMC_38_SEMC_DM01 + 0xf1 /* SEMC_DM1 */ + MXRT1050_IOMUXC_GPIO_EMC_39_SEMC_DQS + (IMX_PAD_SION | 0xf1) /* SEMC_DQS */ + >; u-boot,dm-spl; }; }; };
+&pinctrl_lpuart1 { + u-boot,dm-spl; +}; + +&pinctrl_usdhc0 { + u-boot,dm-spl; +}; + &usdhc1 { u-boot,dm-spl; }; diff --git a/arch/arm/dts/imxrt1050-evk.dts b/arch/arm/dts/imxrt1050-evk.dts index fb2da3adfcf..6a9c10decf5 100644 --- a/arch/arm/dts/imxrt1050-evk.dts +++ b/arch/arm/dts/imxrt1050-evk.dts @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2019 * Author(s): Giulio Benetti giulio.benetti@benettiengineering.com @@ -6,7 +6,6 @@
/dts-v1/; #include "imxrt1050.dtsi" -#include "imxrt1050-evk-u-boot.dtsi" #include "imxrt1050-pinfunc.h"
/ { @@ -14,210 +13,52 @@ compatible = "fsl,imxrt1050-evk", "fsl,imxrt1050";
chosen { - bootargs = "root=/dev/ram"; - stdout-path = "serial0:115200n8"; - tick-timer = &gpt1; + stdout-path = &lpuart1; };
- memory { + aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + mmc0 = &usdhc1; + serial0 = &lpuart1; + }; + + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x2000000>; }; };
-&lpuart1 { /* console */ +&lpuart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart1>; status = "okay"; };
-&semc { - /* - * Memory configuration from sdram datasheet IS42S16160J-6BLI - */ - fsl,sdram-mux = /bits/ 8 <MUX_A8_SDRAM_A8 - MUX_CSX0_SDRAM_CS1 - 0 - 0 - 0 - 0>; - fsl,sdram-control = /bits/ 8 <MEM_WIDTH_16BITS - BL_8 - COL_9BITS - CL_3>; - fsl,sdram-timing = /bits/ 8 <0x2 - 0x2 - 0x9 - 0x1 - 0x5 - 0x6 - - 0x20 - 0x09 - 0x01 - 0x00 - - 0x04 - 0x0A - 0x21 - 0x50>; - - bank1: bank@0 { - fsl,base-address = <0x80000000>; - fsl,memory-size = <MEM_SIZE_32M>; - }; -}; - &iomuxc { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lpuart1>; - - imxrt1050-evk { - pinctrl_lpuart1: lpuart1grp { - fsl,pins = < - MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD - 0xf1 - MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD - 0xf1 - >; - }; - - pinctrl_semc: semcgrp { - fsl,pins = < - MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00 - 0xf1 /* SEMC_D0 */ - MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01 - 0xf1 /* SEMC_D1 */ - MXRT1050_IOMUXC_GPIO_EMC_02_SEMC_DA02 - 0xf1 /* SEMC_D2 */ - MXRT1050_IOMUXC_GPIO_EMC_03_SEMC_DA03 - 0xf1 /* SEMC_D3 */ - MXRT1050_IOMUXC_GPIO_EMC_04_SEMC_DA04 - 0xf1 /* SEMC_D4 */ - MXRT1050_IOMUXC_GPIO_EMC_05_SEMC_DA05 - 0xf1 /* SEMC_D5 */ - MXRT1050_IOMUXC_GPIO_EMC_06_SEMC_DA06 - 0xf1 /* SEMC_D6 */ - MXRT1050_IOMUXC_GPIO_EMC_07_SEMC_DA07 - 0xf1 /* SEMC_D7 */ - MXRT1050_IOMUXC_GPIO_EMC_08_SEMC_DM00 - 0xf1 /* SEMC_DM0 */ - MXRT1050_IOMUXC_GPIO_EMC_09_SEMC_ADDR00 - 0xf1 /* SEMC_A0 */ - MXRT1050_IOMUXC_GPIO_EMC_10_SEMC_ADDR01 - 0xf1 /* SEMC_A1 */ - MXRT1050_IOMUXC_GPIO_EMC_11_SEMC_ADDR02 - 0xf1 /* SEMC_A2 */ - MXRT1050_IOMUXC_GPIO_EMC_12_SEMC_ADDR03 - 0xf1 /* SEMC_A3 */ - MXRT1050_IOMUXC_GPIO_EMC_13_SEMC_ADDR04 - 0xf1 /* SEMC_A4 */ - MXRT1050_IOMUXC_GPIO_EMC_14_SEMC_ADDR05 - 0xf1 /* SEMC_A5 */ - MXRT1050_IOMUXC_GPIO_EMC_15_SEMC_ADDR06 - 0xf1 /* SEMC_A6 */ - MXRT1050_IOMUXC_GPIO_EMC_16_SEMC_ADDR07 - 0xf1 /* SEMC_A7 */ - MXRT1050_IOMUXC_GPIO_EMC_17_SEMC_ADDR08 - 0xf1 /* SEMC_A8 */ - MXRT1050_IOMUXC_GPIO_EMC_18_SEMC_ADDR09 - 0xf1 /* SEMC_A9 */ - MXRT1050_IOMUXC_GPIO_EMC_19_SEMC_ADDR11 - 0xf1 /* SEMC_A11 */ - MXRT1050_IOMUXC_GPIO_EMC_20_SEMC_ADDR12 - 0xf1 /* SEMC_A12 */ - MXRT1050_IOMUXC_GPIO_EMC_21_SEMC_BA0 - 0xf1 /* SEMC_BA0 */ - MXRT1050_IOMUXC_GPIO_EMC_22_SEMC_BA1 - 0xf1 /* SEMC_BA1 */ - MXRT1050_IOMUXC_GPIO_EMC_23_SEMC_ADDR10 - 0xf1 /* SEMC_A10 */ - MXRT1050_IOMUXC_GPIO_EMC_24_SEMC_CAS - 0xf1 /* SEMC_CAS */ - MXRT1050_IOMUXC_GPIO_EMC_25_SEMC_RAS - 0xf1 /* SEMC_RAS */ - MXRT1050_IOMUXC_GPIO_EMC_26_SEMC_CLK - 0xf1 /* SEMC_CLK */ - MXRT1050_IOMUXC_GPIO_EMC_27_SEMC_CKE - 0xf1 /* SEMC_CKE */ - MXRT1050_IOMUXC_GPIO_EMC_28_SEMC_WE - 0xf1 /* SEMC_WE */ - MXRT1050_IOMUXC_GPIO_EMC_29_SEMC_CS0 - 0xf1 /* SEMC_CS0 */ - MXRT1050_IOMUXC_GPIO_EMC_30_SEMC_DA08 - 0xf1 /* SEMC_D8 */ - MXRT1050_IOMUXC_GPIO_EMC_31_SEMC_DA09 - 0xf1 /* SEMC_D9 */ - MXRT1050_IOMUXC_GPIO_EMC_32_SEMC_DA10 - 0xf1 /* SEMC_D10 */ - MXRT1050_IOMUXC_GPIO_EMC_33_SEMC_DA11 - 0xf1 /* SEMC_D11 */ - MXRT1050_IOMUXC_GPIO_EMC_34_SEMC_DA12 - 0xf1 /* SEMC_D12 */ - MXRT1050_IOMUXC_GPIO_EMC_35_SEMC_DA13 - 0xf1 /* SEMC_D13 */ - MXRT1050_IOMUXC_GPIO_EMC_36_SEMC_DA14 - 0xf1 /* SEMC_D14 */ - MXRT1050_IOMUXC_GPIO_EMC_37_SEMC_DA15 - 0xf1 /* SEMC_D15 */ - MXRT1050_IOMUXC_GPIO_EMC_38_SEMC_DM01 - 0xf1 /* SEMC_DM1 */ - MXRT1050_IOMUXC_GPIO_EMC_39_SEMC_DQS - (IMX_PAD_SION | 0xf1) /* SEMC_DQS */ - >; - }; - - pinctrl_usdhc0: usdhc0grp { - fsl,pins = < - MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B - 0x1B000 - MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT - 0xB069 - MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD - 0x17061 - MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK - 0x17061 - MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3 - 0x17061 - MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2 - 0x17061 - MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1 - 0x17061 - MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0 - 0x17061 - >; - }; - - pinctrl_lcdif: lcdifgrp { - fsl,pins = < - MXRT1050_IOMUXC_GPIO_B0_00_LCD_CLK 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B0_01_LCD_ENABLE 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B0_02_LCD_HSYNC 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B0_03_LCD_VSYNC 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B0_04_LCD_DATA00 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B0_05_LCD_DATA01 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B0_06_LCD_DATA02 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B0_07_LCD_DATA03 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B0_08_LCD_DATA04 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B0_09_LCD_DATA05 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B0_10_LCD_DATA06 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B0_11_LCD_DATA07 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B0_12_LCD_DATA08 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B0_13_LCD_DATA09 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B0_14_LCD_DATA10 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B0_15_LCD_DATA11 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B1_01_LCD_DATA13 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B1_02_LCD_DATA14 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B1_03_LCD_DATA15 0x1b0b1 - MXRT1050_IOMUXC_GPIO_B1_15_GPIO2_IO31 0x0b069 - MXRT1050_IOMUXC_GPIO_AD_B0_02_GPIO1_IO02 0x0b069 - >; - }; + pinctrl_lpuart1: lpuart1grp { + fsl,pins = < + MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD 0xf1 + MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD 0xf1 + >; }; -};
-&gpt1 { - status = "okay"; + pinctrl_usdhc0: usdhc0grp { + fsl,pins = < + MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B 0x1B000 + MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT 0xB069 + MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0 0x17061 + >; + }; };
&usdhc1 { @@ -226,42 +67,6 @@ pinctrl-1 = <&pinctrl_usdhc0>; pinctrl-2 = <&pinctrl_usdhc0>; pinctrl-3 = <&pinctrl_usdhc0>; - status = "okay"; - cd-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; -}; - -&lcdif { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcdif>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <16>; - bus-width = <16>; - - display-timings { - timing0: timing0 { - clock-frequency = <9300000>; - hactive = <480>; - vactive = <272>; - hback-porch = <4>; - hfront-porch = <8>; - vback-porch = <4>; - vfront-porch = <8>; - hsync-len = <41>; - vsync-len = <10>; - de-active = <1>; - pixelclk-active = <0>; - hsync-active = <0>; - vsync-active = <0>; - }; - }; - }; -}; - -&usbotg1 { - dr_mode = "host"; status = "okay"; }; diff --git a/arch/arm/dts/imxrt1050-pinfunc.h b/arch/arm/dts/imxrt1050-pinfunc.h index a29031ab3de..22c14a3262a 100644 --- a/arch/arm/dts/imxrt1050-pinfunc.h +++ b/arch/arm/dts/imxrt1050-pinfunc.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /* * Copyright (C) 2019 * Author(s): Giulio Benetti giulio.benetti@benettiengineering.com diff --git a/arch/arm/dts/imxrt1050.dtsi b/arch/arm/dts/imxrt1050.dtsi index 09f4712af68..03e6a858a7b 100644 --- a/arch/arm/dts/imxrt1050.dtsi +++ b/arch/arm/dts/imxrt1050.dtsi @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2019 * Author(s): Giulio Benetti giulio.benetti@benettiengineering.com @@ -8,53 +8,37 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/imxrt1050-clock.h> #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/memory/imxrt-sdram.h>
/ { #address-cells = <1>; #size-cells = <1>;
- aliases { - display0 = &lcdif; - gpio0 = &gpio1; - gpio1 = &gpio2; - gpio2 = &gpio3; - gpio3 = &gpio4; - gpio4 = &gpio5; - mmc0 = &usdhc1; - serial0 = &lpuart1; - usbphy0 = &usbphy1; - }; - clocks { osc: osc { - compatible = "fsl,imx-osc", "fixed-clock"; + compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24000000>; }; - };
- soc { - semc: semc@402f0000 { - compatible = "fsl,imxrt-semc"; - reg = <0x402f0000 0x4000>; - clocks = <&clks IMXRT1050_CLK_SEMC>; - pinctrl-0 = <&pinctrl_semc>; - pinctrl-names = "default"; - status = "okay"; + osc3M: osc3M { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <3000000>; }; + };
+ soc { lpuart1: serial@40184000 { - compatible = "fsl,imxrt-lpuart"; + compatible = "fsl,imxrt1050-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x40184000 0x4000>; - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <20>; clocks = <&clks IMXRT1050_CLK_LPUART1>; - clock-names = "per"; + clock-names = "ipg"; status = "disabled"; };
- iomuxc: iomuxc@401f8000 { - compatible = "fsl,imxrt-iomuxc"; + iomuxc: pinctrl@401f8000 { + compatible = "fsl,imxrt1050-iomuxc"; reg = <0x401f8000 0x4000>; fsl,mux_mask = <0x7>; }; @@ -64,31 +48,61 @@ reg = <0x400d8000 0x4000>; };
- clks: ccm@400fc000 { + clks: clock-controller@400fc000 { compatible = "fsl,imxrt1050-ccm"; reg = <0x400fc000 0x4000>; - interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <95>, <96>; + clocks = <&osc>; + clock-names = "osc"; #clock-cells = <1>; - }; - - usdhc1: usdhc@402c0000 { - compatible = "fsl,imxrt-usdhc"; - reg = <0x402c0000 0x10000>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMXRT1050_CLK_USDHC1>; - clock-names = "per"; + assigned-clocks = <&clks IMXRT1050_CLK_PLL1_BYPASS>, + <&clks IMXRT1050_CLK_PLL1_BYPASS>, + <&clks IMXRT1050_CLK_PLL2_BYPASS>, + <&clks IMXRT1050_CLK_PLL3_BYPASS>, + <&clks IMXRT1050_CLK_PLL3_PFD1_664_62M>, + <&clks IMXRT1050_CLK_PLL2_PFD2_396M>; + assigned-clock-parents = <&clks IMXRT1050_CLK_PLL1_REF_SEL>, + <&clks IMXRT1050_CLK_PLL1_ARM>, + <&clks IMXRT1050_CLK_PLL2_SYS>, + <&clks IMXRT1050_CLK_PLL3_USB_OTG>, + <&clks IMXRT1050_CLK_PLL3_USB_OTG>, + <&clks IMXRT1050_CLK_PLL2_SYS>; + }; + + edma1: dma-controller@400e8000 { + #dma-cells = <2>; + compatible = "fsl,imx7ulp-edma"; + reg = <0x400e8000 0x4000>, + <0x400ec000 0x4000>; + dma-channels = <32>; + interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, <8>, + <9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>; + clock-names = "dma", "dmamux0"; + clocks = <&clks IMXRT1050_CLK_DMA>, + <&clks IMXRT1050_CLK_DMA_MUX>; + }; + + usdhc1: mmc@402c0000 { + compatible = "fsl,imxrt1050-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x402c0000 0x4000>; + interrupts = <110>; + clocks = <&clks IMXRT1050_CLK_IPG_PDOF>, + <&clks IMXRT1050_CLK_OSC>, + <&clks IMXRT1050_CLK_USDHC1>; + clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,wp-controller; + no-1-8-v; + max-frequency = <4000000>; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; status = "disabled"; };
gpio1: gpio@401b8000 { - compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio"; + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; reg = <0x401b8000 0x4000>; - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <80>, <81>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -96,10 +110,9 @@ };
gpio2: gpio@401bc000 { - compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio"; + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; reg = <0x401bc000 0x4000>; - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <82>, <83>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -107,10 +120,9 @@ };
gpio3: gpio@401c0000 { - compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio"; + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; reg = <0x401c0000 0x4000>; - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <84>, <85>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -118,10 +130,9 @@ };
gpio4: gpio@401c4000 { - compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio"; + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; reg = <0x401c4000 0x4000>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <86>, <87>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -129,60 +140,21 @@ };
gpio5: gpio@400c0000 { - compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio"; + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; reg = <0x400c0000 0x4000>; - interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <88>, <89>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; };
- lcdif: lcdif@402b8000 { - compatible = "fsl,imxrt-lcdif"; - reg = <0x402b8000 0x4000>; - interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMXRT1050_CLK_LCDIF_PIX>, - <&clks IMXRT1050_CLK_LCDIF_APB>; - clock-names = "pix", "axi"; - assigned-clocks = <&clks IMXRT1050_CLK_LCDIF_SEL>; - assigned-clock-parents = <&clks IMXRT1050_CLK_PLL5_VIDEO>; - status = "disabled"; - }; - - gpt1: gpt1@401ec000 { - compatible = "fsl,imxrt-gpt"; + gpt: timer@401ec000 { + compatible = "fsl,imxrt1050-gpt", "fsl,imx6dl-gpt", "fsl,imx6sl-gpt"; reg = <0x401ec000 0x4000>; interrupts = <100>; - clocks = <&osc>; - status = "disabled"; - }; - - usbphy1: usbphy@400d9000 { - compatible = "fsl,imxrt-usbphy"; - reg = <0x400d9000 0x1000>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; - }; - - usbmisc: usbmisc@402e0800 { - #index-cells = <1>; - compatible = "fsl,imxrt-usbmisc"; - reg = <0x402e0800 0x200>; - clocks = <&clks IMXRT1050_CLK_USBOH3>; - }; - - usbotg1: usb@402e0000 { - compatible = "fsl,imxrt-usb", "fsl,imx27-usb"; - reg = <0x402e0000 0x200>; - interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMXRT1050_CLK_USBOH3>; - fsl,usbphy = <&usbphy1>; - fsl,usbmisc = <&usbmisc 0>; - ahb-burst-config = <0x0>; - tx-burst-size-dword = <0x10>; - rx-burst-size-dword = <0x10>; - status = "disabled"; + clocks = <&osc3M>; + clock-names = "per"; }; }; }; diff --git a/include/dt-bindings/clock/imxrt1050-clock.h b/include/dt-bindings/clock/imxrt1050-clock.h index f74dbbcf937..93bef0832d1 100644 --- a/include/dt-bindings/clock/imxrt1050-clock.h +++ b/include/dt-bindings/clock/imxrt1050-clock.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /* * Copyright(C) 2019 * Author(s): Giulio Benetti giulio.benetti@benettiengineering.com @@ -62,6 +62,11 @@ #define IMXRT1050_CLK_PLL7_USB_HOST 53 #define IMXRT1050_CLK_LCDIF_PIX 54 #define IMXRT1050_CLK_USBOH3 55 -#define IMXRT1050_CLK_END 56 +#define IMXRT1050_CLK_IPG_PDOF 56 +#define IMXRT1050_CLK_PER_CLK_SEL 57 +#define IMXRT1050_CLK_PER_PDOF 58 +#define IMXRT1050_CLK_DMA 59 +#define IMXRT1050_CLK_DMA_MUX 60 +#define IMXRT1050_CLK_END 61
#endif /* __DT_BINDINGS_CLOCK_IMXRT1050_H */