hab_failsafe when called puts the part into BootROM recovery mode. This will allow u-boot scripts to script the dropping down into recovery mode.
=> hab_failsafe
Shows the i.MX7 appear as "hiddev0,hidraw5: USB HID v1.10 Device [Freescale SemiConductor Inc SP Blank ULT1] " in a Linux dmesg thus allowing download of a new image via the BootROM USB download protocol routine.
Signed-off-by: Bryan O'Donoghue bryan.odonoghue@linaro.org Cc: Stefano Babic sbabic@denx.de Cc: Fabio Estevam fabio.estevam@nxp.com Cc: Peng Fan peng.fan@nxp.com Cc: Albert Aribaud albert.u.boot@aribaud.net Cc: Sven Ebenfeld sven.ebenfeld@gmail.com Cc: George McCollister george.mccollister@gmail.com Cc: Breno Matheus Lima brenomatheus@gmail.com Tested-by: Breno Lima breno.lima@nxp.com Reviewed-by: Fabio Estevam fabio.estevam@nxp.com --- arch/arm/mach-imx/hab.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
diff --git a/arch/arm/mach-imx/hab.c b/arch/arm/mach-imx/hab.c index 1236717..5f19777 100644 --- a/arch/arm/mach-imx/hab.c +++ b/arch/arm/mach-imx/hab.c @@ -414,6 +414,22 @@ static int do_authenticate_image(cmd_tbl_t *cmdtp, int flag, int argc, return rcode; }
+static int do_hab_failsafe(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + hab_rvt_failsafe_t *hab_rvt_failsafe; + + if (argc != 1) { + cmd_usage(cmdtp); + return 1; + } + + hab_rvt_failsafe = hab_rvt_failsafe_p; + hab_rvt_failsafe(); + + return 0; +} + U_BOOT_CMD( hab_status, CONFIG_SYS_MAXARGS, 1, do_hab_status, "display HAB status", @@ -429,6 +445,11 @@ U_BOOT_CMD( "ivt_offset - hex offset of IVT in the image" );
+U_BOOT_CMD( + hab_failsafe, CONFIG_SYS_MAXARGS, 1, do_hab_failsafe, + "run BootROM failsafe routine", + "" + );
#endif /* !defined(CONFIG_SPL_BUILD) */