eMMC devices have hardware partitions such as user, boot0, and boot1.
Add an enumerated type defining the hardware partition values and an array of names describing them by name that can be used throughout U-Boot.
Allow these names to be displayed when reading and used when setting the mmc PARTITION_CONFIG field via 'mmc partconf'.
Before: u-boot=> mmc partconf 2 1 1 0 && mmc partconf 2 EXT_CSD[179], PARTITION_CONFIG: BOOT_ACK: 0x1 BOOT_PARTITION_ENABLE: 0x2 PARTITION_ACCESS: 0x0
After: u-boot=> mmc partconf 2 1 1 0 && mmc partconf 2 EXT_CSD[179], PARTITION_CONFIG: BOOT_ACK: 0x1 BOOT_PARTITION_ENABLE: 0x1 (boot0) PARTITION_ACCESS: 0x0 u-boot=> mmc partconf 2 1 boot1 0 && mmc partconf 2 EXT_CSD[179], PARTITION_CONFIG: BOOT_ACK: 0x1 BOOT_PARTITION_ENABLE: 0x2 (boot1) PARTITION_ACCESS: 0x0
Signed-off-by: Tim Harvey tharvey@gateworks.com --- v3: - define partition names and values in mmc.h/mmc.c for others to use
v2: - fix typo in subject - add names for gp1..gp4 --- cmd/mmc.c | 14 +++++++++++--- drivers/mmc/mmc.c | 11 +++++++++++ include/mmc.h | 15 +++++++++++++++ 3 files changed, 37 insertions(+), 3 deletions(-)
diff --git a/cmd/mmc.c b/cmd/mmc.c index 2d5430a53079..26ab4450816b 100644 --- a/cmd/mmc.c +++ b/cmd/mmc.c @@ -14,6 +14,7 @@ #include <part.h> #include <sparse_format.h> #include <image-sparse.h> +#include <linux/ctype.h>
static int curr_device = -1;
@@ -918,8 +919,8 @@ static int mmc_partconf_print(struct mmc *mmc, const char *varname)
printf("EXT_CSD[179], PARTITION_CONFIG:\n" "BOOT_ACK: 0x%x\n" - "BOOT_PARTITION_ENABLE: 0x%x\n" - "PARTITION_ACCESS: 0x%x\n", ack, part, access); + "BOOT_PARTITION_ENABLE: 0x%x (%s)\n" + "PARTITION_ACCESS: 0x%x\n", ack, part, emmc_hwpart_names[part], access);
return CMD_RET_SUCCESS; } @@ -949,7 +950,14 @@ static int do_mmc_partconf(struct cmd_tbl *cmdtp, int flag, return mmc_partconf_print(mmc, cmd_arg2(argc, argv));
ack = dectoul(argv[2], NULL); - part_num = dectoul(argv[3], NULL); + if (!isdigit(*argv[3])) { + for (part_num = 0; part_num <= EMMC_HWPART_USER; part_num++) { + if (!strcmp(argv[3], emmc_hwpart_names[part_num])) + break; + } + } else { + part_num = dectoul(argv[3], NULL); + } access = dectoul(argv[4], NULL);
/* acknowledge to be sent during boot operation */ diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 7b068c71ff37..132afe1b8a29 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -29,6 +29,17 @@
#define DEFAULT_CMD6_TIMEOUT_MS 500
+const char *emmc_hwpart_names[] = { + "user", + "boot0", + "boot1", + "gp1", + "gp2", + "gp3", + "gp4", + "user", +}; + static int mmc_set_signal_voltage(struct mmc *mmc, uint signal_voltage);
#if !CONFIG_IS_ENABLED(DM_MMC) diff --git a/include/mmc.h b/include/mmc.h index 4b8327f1f93b..7243bd761202 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -381,6 +381,21 @@ enum mmc_voltage { #define MMC_TIMING_MMC_HS200 9 #define MMC_TIMING_MMC_HS400 10
+/* emmc hardware partition values */ +enum emmc_hwpart { + EMMC_HWPART_DEFAULT = 0, + EMMC_HWPART_BOOT0 = 1, + EMMC_HWPART_BOOT1 = 2, + EMMC_HWPART_GP1 = 3, + EMMC_HWPART_GP2 = 4, + EMMC_HWPART_GP3 = 5, + EMMC_HWPART_GP4 = 6, + EMMC_HWPART_USER = 7, +}; + +/* emmc hardware partition names */ +extern const char *emmc_hwpart_names[]; + /* Driver model support */
/**