On 1/19/23 04:03, Tony Dinh wrote:
This syncs drivers/ddr/marvell/a38x/ with the master branch of repository https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git
up to the commit "mv_ddr: a3700: Use the right size for memset to not overflow" d5acc10c287e40cc2feeb28710b92e45c93c702c
This patch was created by following steps:
- Replace all a38x files in U-Boot tree by files from upstream github
Marvell mv-ddr-marvell repository.
- Run following command to omit portions not relevant for a38x, ddr3, and ddr4:
files=drivers/ddr/marvell/a38x/* unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_APN806 \ -UCONFIG_MC_STATIC -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_PHY_STATIC_PRINT -UCONFIG_CUSTOMER_BOARD_SUPPORT \ -UCONFIG_A3700 -UA3900 -UA80X0 -UA70X0 -DCONFIG_ARMADA_38X -UCONFIG_ARMADA_39X \ -UCONFIG_64BIT $files
- Manually change license to SPDX-License-Identifier
(upstream license in upstream github repository contains long license texts and U-Boot is using just SPDX-License-Identifier.
After applying this patch, a38x, ddr3, and ddr4 code in upstream Marvell github repository and in U-Boot would be fully identical. So in future applying above steps could be used to sync code again.
The only change in this patch are:
- Some fixes with include files.
- Some function return and basic type defines changes in
mv_ddr_plat.c (to correct Marvell bug). 3. Remove of dead code in newly copied files (as a result of the filter script stripping out everything other than a38x, dd3, and ddr4).
Reference: "ddr: marvell: a38x: Sync code with Marvell mv-ddr-marvell repository" https://source.denx.de/u-boot/u-boot/-/commit/107c3391b95bcc2ba09a876da4fa0c...
Signed-off-by: Tony Dinh mibodhi@gmail.com
Applied to u-boot-marvell/master
Thanks, Stefan