MC_INIT command currently access spi-nor flash memory directly. As per spi-mem framework, flash memory access via absolute addresses is no more possible. Use flash APIs to access memory instead of directly using it.
Signed-off-by: Kuldeep Singh kuldeep.singh@nxp.com --- include/configs/ls2080ardb.h | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-)
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index de14fb4..6a74f62 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -322,10 +322,14 @@ unsigned long get_board_sys_clk(void);
#ifdef CONFIG_TFABOOT #define QSPI_MC_INIT_CMD \ + "sf probe 0:0; sf read 0x80A00000 0xA00000 0x100000; " \ + "sf read 0x80E00000 0xE00000 0x100000; " \ "env exists secureboot && " \ - "esbc_validate 0x20700000 && " \ - "esbc_validate 0x20740000;" \ - "fsl_mc start mc 0x20a00000 0x20e00000 \0" + "sf read 0x80700000 0x700000 0x40000 && " \ + "sf read 0x80740000 0x740000 0x40000 && " \ + "esbc_validate 0x80700000 && " \ + "esbc_validate 0x80740000; " \ + "fsl_mc start mc 0x80A00000 0x80E00000 \0" #define SD_MC_INIT_CMD \ "mmcinfo;mmc read 0x80a00000 0x5000 0x1200;" \ "mmc read 0x80e00000 0x7000 0x800;" \ @@ -343,10 +347,14 @@ unsigned long get_board_sys_clk(void); #else #ifdef CONFIG_QSPI_BOOT #define MC_INIT_CMD \ - "mcinitcmd=env exists secureboot && " \ - "esbc_validate 0x20700000 && " \ - "esbc_validate 0x20740000;" \ - "fsl_mc start mc 0x20a00000 0x20e00000 \0" + "mcinitcmd=sf probe 0:0;sf read 0x80A00000 0xA00000 0x100000; " \ + " sf read 0x80E00000 0xE00000 0x100000; " \ + "env exists secureboot && " \ + "sf read 0x80700000 0x700000 0x40000 && " \ + "sf read 0x80740000 0x740000 0x40000 && " \ + "esbc_validate 0x80700000 && " \ + "esbc_validate 0x80740000; " \ + "fsl_mc start mc 0x80A00000 0x80E00000 \0" #elif defined(CONFIG_SD_BOOT) #define MC_INIT_CMD \ "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;" \