At present, in cgc1_pll3_init we don't set the pll3pfd div values, just use the default 0. But on A1 part, ROM will set PLL3 pfd1div2 to 1 and pfd2div1 to 3. This finally causes some clocks' rate decreased, for example USDHC. So clear the PLL3DIV_PFD dividers to get correct rate.
Signed-off-by: Ye Li ye.li@nxp.com Reviewed-by: Peng Fan peng.fan@nxp.com --- arch/arm/mach-imx/imx8ulp/cgc.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/arch/arm/mach-imx/imx8ulp/cgc.c b/arch/arm/mach-imx/imx8ulp/cgc.c index d240aba..104109e 100644 --- a/arch/arm/mach-imx/imx8ulp/cgc.c +++ b/arch/arm/mach-imx/imx8ulp/cgc.c @@ -169,6 +169,9 @@ void cgc1_pll3_init(ulong freq) while (!(readl(&cgc1_regs->pll3pfdcfg) & BIT(30))) ;
+ clrbits_le32(&cgc1_regs->pll3div_pfd0, 0x3f3f3f3f); + clrbits_le32(&cgc1_regs->pll3div_pfd1, 0x3f3f3f3f); + clrbits_le32(&cgc1_regs->pll3div_pfd0, BIT(7)); clrbits_le32(&cgc1_regs->pll3div_pfd0, BIT(15)); clrbits_le32(&cgc1_regs->pll3div_pfd0, BIT(23));