On 1/24/23 17:58, Marek Vasut wrote:
On 1/24/23 09:07, Patrice CHOTARD wrote:
Hi Marek
Hi,
On 1/23/23 23:32, Marek Vasut wrote:
In case CONFIG_DM_RESET=n, reset_get_bulk() returns -ENOTSUPP. Do not fail in that case either. This is a valid use case, e.g. in case the reset driver is a no-op and would only waste space in the build.
Fixes: 81755b8c20f ("usb: host: ehci-generic: Make resets and clocks optional") Signed-off-by: Marek Vasut marek.vasut+renesas@mailbox.org
Cc: Andre Przywara andre.przywara@arm.com Cc: Patrice Chotard patrice.chotard@foss.st.com
drivers/usb/host/ehci-generic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/host/ehci-generic.c b/drivers/usb/host/ehci-generic.c index a765a307a32..83fe701ff67 100644 --- a/drivers/usb/host/ehci-generic.c +++ b/drivers/usb/host/ehci-generic.c @@ -81,7 +81,7 @@ static int ehci_usb_probe(struct udevice *dev) } err = reset_get_bulk(dev, &priv->resets); - if (err && err != -ENOENT) { + if (err && err != -ENOENT && err != -ENOTSUPP) { dev_err(dev, "Failed to get resets (err=%d)\n", err); goto clk_err; }
A similar patch can be applied for testing return value of clk_get_bulk() ? In case CONFIG_CLK is not set, clk_get_bulk() can return -ENOSYS.
I would much prefer a proper STIH clock driver however.
Ok, i will prepare patches for STIH, i think i should also add stub reset and regulator drivers for this platform.
Patrice
And looking at R-Car CPG, I think I will also write a reset controller driver instead of this patch.