Note: pwclient dies on patch 73644 with the following
albert@lilith:~/src/u-boot$ pwclient apply 73644 Applying patch #73644 to current directory Description: [U-Boot,v2,1/4] at91rm9200ek: add configure target for RAM boot Traceback (most recent call last): File "/home/albert/bin/pwclient", line 463, in <module> main() File "/home/albert/bin/pwclient", line 446, in main action_apply(rpc, patch_id) File "/home/albert/bin/pwclient", line 263, in action_apply proc.communicate(s) File "/usr/lib/python2.6/subprocess.py", line 680, in communicate self.stdin.write(input) UnicodeEncodeError: 'ascii' codec can't encode character u'\xdf' in position 605: ordinal not in range(128)
I'd wager it does not like Andreas' last name.
Le 01/12/2010 16:13, Andreas Bießmann a écrit :
Dear Albert ARIBAUD,
Am 01.12.2010 13:49, schrieb Albert ARIBAUD:
thanks Andreas,
What is the exact symptom? does the board display anything on its console, or does it stay completely silent?
I see the banner and 'DRAM: 32 MiB' on serial console. If I activate DEBUG in a/a/l/board.c I can see the debug messages up to 'relocation Offset is ...'
Thanks.
The size of u-boot.bin is right for sections .text to .dynsym inclusive as listed by readelf -a.
The content of the binary u-boot.bin correctly reflects the .rel.dyn and .dynsym sections of the ELF u-boot file.
_rel_dyn_start_ofs, _rel_dyn_end_ofs and _dynsym_start_ofs> all contain correct offsets to their respective targets.
This means that if the u-boot.bin is correctly flashed to NOR, and if nothing touches the .rel.dyn and .dynsym section, relocation is done correctly.
But... with your fixes applied above v2010.12-rc2, as you indicated, you don't have the fix for not using r8 during relocation, which means GD is completely bogus after relocation. Can you apply this fix too?
regards
Andreas Bießmann
Amicalement,