For the record, I also tested this on a Wandboard Dual RevC1 and it worked there, too.
-derek
On Fri, April 17, 2020 10:50 am, Heiko Schocher wrote:
Hello Fabio,
Am 17.04.2020 um 14:30 schrieb Fabio Estevam:
Hi Heiko,
On Fri, Apr 17, 2020 at 9:00 AM Derek Atkins derek@ihtfp.com wrote:
Hi, Let me know if you want me to test this on my imx6q d1
Derek confirmed that v2 worked on his imx6q wandboard revD1 and I have just submitted v2 to the list.
Hopefully it will also work on your imx6dl wandboard revD1.
Yes, can confirm this, see log attached.
Thanks for your efforts!
bye, Heiko
hs@lab-1:tbot-tbot2go [wandboard-devel-messe] $ tbot @argswandboardlab1 wandboard_ub_check_version tbot starting ... ├─Flags: │ 'lab-1-build' ├─Calling wandboard_ub_check_version ... │ ├─[local] ssh -o BatchMode=yes -i /home/hs/.ssh/id_rsa -p 22 hs@192.168.1.109 │ ├─[lab1] strings /var/lib/tftpboot/wandboard/tbot/u-boot.bin | grep --color=never "U-Boot 2" │ │ ## U-Boot 2020.04-tbot-00375-g946d9a0974 (Apr 17 2020 - 16:20:27 +0200) │ ├─found in image U-Boot version U-Boot 2020.04-tbot-00375-g946d9a0974 (Apr 17 2020 - 16:20:27 +0200) │ ├─[lab1] strings /var/lib/tftpboot/wandboard/tbot/SPL | grep --color=never "U-Boot SPL" │ │ ## U-Boot SPL 2020.04-tbot-00375-g946d9a0974 (Apr 17 2020 - 16:20:27 +0200) │ ├─found in image U-Boot SPL version U-Boot SPL 2020.04-tbot-00375-g946d9a0974 (Apr 17 2020 - 16:20:27 +0200) │ ├─[local] ssh -o BatchMode=yes -i /home/hs/.ssh/id_rsa -p 22 hs@192.168.1.109 │ ├─[lab1] kermit /home/hs/kermrc_wandboard │ ├─POWERON (wandboard) │ ├─[lab1] sudo sispmctl -D 01:01:56:a2:f1 -o 3 │ │ ## Accessing Gembird #0 USB device 021 │ │ ## Switched outlet 3 on │ ├─UBOOT (wandboard-uboot) │ │ <> Connecting to /dev/serial/by-id/usb-Prolific_Technology_Inc._USB-Serial_Controller_D-if00-port0, speed 115200 │ │ <> Escape character: Ctrl-\ (ASCII 28, FS): enabled │ │ <> Type the escape character followed by C to get back, │ │ <> or followed by ? to see other options. │ │ <> ---------------------------------------------------- │ │ <> │ │ <> U-Boot SPL 2020.04-tbot-00375-g946d9a0974 (Apr 17 2020 - 16:20:27 +0200) │ │ <> Trying to boot from MMC1 │ │ <> │ │ <> │ │ <> U-Boot 2020.04-tbot-00375-g946d9a0974 (Apr 17 2020 - 16:20:27 +0200) │ │ <> │ │ <> CPU: Freescale i.MX6DL rev1.3 at 792 MHz │ │ <> Reset cause: POR │ │ <> DRAM: 1 GiB │ │ <> PMIC: PFUZE100 ID=0x10 │ │ <> MMC: FSL_SDHC: 2, FSL_SDHC: 1, FSL_SDHC: 0 │ │ <> Loading Environment from MMC... *** Warning - bad CRC, using default environment │ │ <> │ │ <> No panel detected: default to HDMI │ │ <> Display: HDMI (1024x768) │ │ <> In: serial │ │ <> Out: serial │ │ <> Err: serial │ │ <> Board: Wandboard rev D1 │ │ <> Net: │ │ <> Warning: ethernet@2188000 using MAC address from ROM │ │ <> eth0: ethernet@2188000 │ │ <> Hit any key to stop autoboot: 0 │ │ <> => │ ├─found U-Boot SPL version U-Boot SPL 2020.04-tbot-00375-g946d9a0974 (Apr 17 2020 - 16:20:27 +0200) installed │ ├─found U-Boot version U-Boot 2020.04-tbot-00375-g946d9a0974 (Apr 17 2020 - 16:20:27 +0200) installed │ ├─POWEROFF (wandboard) │ ├─[lab1] sudo sispmctl -D 01:01:56:a2:f1 -f 3 │ │ ## Accessing Gembird #0 USB device 021 │ │ ## Switched outlet 3 off │ └─Done. (14.212s) ├───────────────────────────────────────── ├─Log written to '/home/hs/data/Entwicklung/wandboard/tbot-tbot2go/log/lab1-wandboard-0040.json' └─SUCCESS (14.340s) hs@lab-1:tbot-tbot2go [wandboard-devel-messe] $ -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: hs@denx.de