Sorry, i sent one useless patch, i will resend this series
Patrice
On 5/10/19 6:11 PM, Patrice Chotard wrote:
This series adds saveenv support for STM32MP1 on several boot devices. STM32MP1 is able to boot on eMMC, sdcard and NOR (NAND support is not fully supported).
On eMMC and sdcard, environment is saved in EXT4 partition On NOR, environment is saved in a dedicated partition On NAND, environment is saved in a UBI volume.
This series:
- enables NAND and NOR support on ev1 board
- enables ENV_IS_IN_SPI_FLASH, ENV_IS_IN_UBI, ENV_IS_IN_EXT4 flags
- fixes get_mtdparts()
- allows to override interface, device and partition for ext4 environment
- updates rule to set ENV_IS_NOWHERE value
- introduce ENV_IS_IN_DEVICE
Patrice Chotard (10): stm32mp1: support dynamic MTDPARTS env: ext4: Allow overriding interface, device and partition board: stm32mp1: Add env_ext4_get_dev_part() and env_ext4_get_intf() env: allow ENV_IS_NOWHERE with other storage target stm32mp1: Add env_get_location() mtd: Fix get_mtdparts() stm32mp1: Move ENV_SIZE to Kconfig configs: stm32mp15: Enable ENV_IS_IN_UBI configs: stm32mp15: Enable ENV_IS_SPI_FLASH stm32mp1: Update env_get_location for NOR support
Patrick Delaunay (3): stm32mp1: activate NAND and NOR support on EV1 env: enable saveenv command when one CONFIG_ENV_IS_IN is activated configs: stm32mp15: Enable ENV_IS_IN_EXT4 and all relative flags
Tom Rini (1): Prepare v2019.07-rc1
Makefile | 4 +- arch/arm/dts/stm32mp157-pinctrl.dtsi | 44 ++++++++++++ arch/arm/dts/stm32mp157c-ev1.dts | 16 +++++ arch/arm/dts/stm32mp157c.dtsi | 15 ++++ arch/arm/mach-stm32mp/Kconfig | 3 + board/st/stm32mp1/stm32mp1.c | 136 +++++++++++++++++++++++++++++++++++ cmd/nvedit.c | 36 ++++++---- configs/stm32mp15_basic_defconfig | 27 +++++++ configs/stm32mp15_trusted_defconfig | 27 +++++++ drivers/mtd/mtd_uboot.c | 5 +- env/Kconfig | 20 ++---- env/ext4.c | 34 +++++---- include/configs/stm32mp1.h | 24 +++++-- 13 files changed, 340 insertions(+), 51 deletions(-)