Implement checkboard() function to display - the boot chain used: basic or trusted - the board compatible in device tree - the board identifier and revision, saved in OTP59 for ST boards
Signed-off-by: Patrick Delaunay patrick.delaunay@st.com ---
Changes in v3: None Changes in v2: None
arch/arm/mach-stm32mp/include/mach/stm32.h | 4 +++ board/st/stm32mp1/stm32mp1.c | 44 ++++++++++++++++++++++++++++-- 2 files changed, 46 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h b/arch/arm/mach-stm32mp/include/mach/stm32.h index 5d0bdca..85d783c 100644 --- a/arch/arm/mach-stm32mp/include/mach/stm32.h +++ b/arch/arm/mach-stm32mp/include/mach/stm32.h @@ -98,7 +98,11 @@ enum boot_device {
/* offset used for BSEC driver: misc_read and misc_write */ #define STM32_BSEC_SHADOW_OFFSET 0x0 +#define STM32_BSEC_SHADOW(id) (STM32_BSEC_SHADOW_OFFSET + (id) * 4) #define STM32_BSEC_OTP_OFFSET 0x80000000 +#define STM32_BSEC_OTP(id) (STM32_BSEC_OTP_OFFSET + (id) * 4) + +#define BSEC_OTP_BOARD 59
#endif /* __ASSEMBLY__*/ #endif /* _MACH_STM32_H_ */ diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c index 54feca0..07d1add 100644 --- a/board/st/stm32mp1/stm32mp1.c +++ b/board/st/stm32mp1/stm32mp1.c @@ -3,11 +3,12 @@ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved */ #include <config.h> -#include <common.h> -#include <led.h> #include <clk.h> +#include <common.h> #include <dm.h> #include <generic-phy.h> +#include <led.h> +#include <misc.h> #include <phy.h> #include <reset.h> #include <usb.h> @@ -26,6 +27,45 @@ DECLARE_GLOBAL_DATA_PTR; #define STM32MP_GGPIO 0x38 #define STM32MP_GGPIO_VBUS_SENSING BIT(21)
+int checkboard(void) +{ + int ret; + char *mode; + u32 otp; + struct udevice *dev; + const char *fdt_compat; + int fdt_compat_len; + + if (IS_ENABLED(CONFIG_STM32MP1_TRUSTED)) + mode = "trusted"; + else + mode = "basic"; + + printf("Board: stm32mp1 in %s mode", mode); + fdt_compat = fdt_getprop(gd->fdt_blob, 0, "compatible", + &fdt_compat_len); + if (fdt_compat && fdt_compat_len) + printf(" (%s)", fdt_compat); + puts("\n"); + + ret = uclass_get_device_by_driver(UCLASS_MISC, + DM_GET_DRIVER(stm32mp_bsec), + &dev); + + if (!ret) + ret = misc_read(dev, STM32_BSEC_SHADOW(BSEC_OTP_BOARD), + &otp, sizeof(otp)); + if (!ret && otp) { + printf("Board: MB%04x Var%d Rev.%c-%02d\n", + otp >> 16, + (otp >> 12) & 0xF, + ((otp >> 8) & 0xF) - 1 + 'A', + otp & 0xF); + } + + return 0; +} + static struct dwc2_plat_otg_data stm32mp_otg_data = { .usb_gusbcfg = STM32MP_GUSBCFG, };