Dear Daniel Gorsulowski,
Hello Reinhard,
Reinhard Meyer wrote:
Dear Daniel Gorsulowski,
...
The at91sam9260(9xe)ek board builds fine and works.
I can confirm that.
Use that as a template or reference what to do. You should *only* need to adapt board/*/files and your configs/<board>.h files. And of course updated entries in boards.cfg.
Not quiet. I had to fix arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c additionally.
Yes, of course... I had only "reworked" the 9260 variant yet. You should need to change it similarly to at91sam9260_devices.c...
With my adoptions, my boards builds fine. But they do not boot. Can you really confirm that the at91sam9260ek board boots? I have no chance to debug my problems, so I have no idea, why my boards does not boot.
Yes it does.
What exactly does "does not boot" mean? No message at all?
Check that your AT91Bootstrap loads u-boot to a sane address not at the very end of DRAM, and that CONFIG_SYS_TEXT_BASE is exactly the address where AT91Bootstrap loads u-boot. (I changed AT91Bootstrap to load u-boot to the very begin of DRAM for our boards.)
Nevertheless, should I send my patches for reviewing?
Of course. We might see something that helps you.
Best Regards, Reinhard