eMMC 5.1+ supports HS400 Enhances Strobe mode without the need for tuning procedure. The flow is as following: - set HS_TIMIMG (Highspeed) - Host change freq to <= 52Mhz - set the bus width to Enhanced strobe and DDR8Bit(CMD6), EXT_CSD[183] = 0x86 instead of 0x80 - set HS_TIMING to 0x3 (HS400) - Host change freq to <= 200Mhz - Host select HS400 enhanced strobe complete
Signed-off-by: Peng Fan peng.fan@nxp.com Cc: Jean-Jacques Hiblot jjhiblot@ti.com Cc: Baruch Siach baruch@tkos.co.il Cc: Michal Simek michal.simek@xilinx.com Cc: T Karthik Reddy t.karthik.reddy@xilinx.com Cc: Simon Glass sjg@chromium.org Cc: Marek Vasut marek.vasut+renesas@gmail.com Cc: Jon Nettleton jon@solid-run.com --- drivers/mmc/Kconfig | 12 ++++++++ drivers/mmc/mmc-uclass.c | 15 ++++++++++ drivers/mmc/mmc.c | 73 +++++++++++++++++++++++++++++++++++++++++++++++- include/mmc.h | 15 ++++++++++ 4 files changed, 114 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index 93588725f2..f22c0a0589 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -117,6 +117,18 @@ config SPL_MMC_UHS_SUPPORT cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus frequency can go up to 208MHz (SDR104)
+config MMC_HS400_ES_SUPPORT + bool "enable HS400 Enhanced Strobe support" + help + The HS400 Enhanced Strobe mode is support by some eMMC. The bus + frequency is up to 200MHz. This mode does not tune the IO. + +config SPL_MMC_HS400_ES_SUPPORT + bool "enable HS400 Enhanced Strobe support in SPL" + help + The HS400 Enhanced Strobe mode is support by some eMMC. The bus + frequency is up to 200MHz. This mode does not tune the IO. + config MMC_HS400_SUPPORT bool "enable HS400 support" select MMC_HS200_SUPPORT diff --git a/drivers/mmc/mmc-uclass.c b/drivers/mmc/mmc-uclass.c index fa4d1af55d..bf34746404 100644 --- a/drivers/mmc/mmc-uclass.c +++ b/drivers/mmc/mmc-uclass.c @@ -120,6 +120,21 @@ int mmc_execute_tuning(struct mmc *mmc, uint opcode) } #endif
+#if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT) +void dm_mmc_set_enhanced_strobe(struct udevice *dev) +{ + struct dm_mmc_ops *ops = mmc_get_ops(dev); + + if (ops->set_enhanced_strobe) + ops->set_enhanced_strobe(dev); +} + +void mmc_set_enhanced_strobe(struct mmc *mmc) +{ + dm_mmc_set_enhanced_strobe(mmc->dev); +} +#endif + int mmc_of_parse(struct udevice *dev, struct mmc_config *cfg) { int val; diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 71b52c6cf2..e3b3a28fd7 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -148,6 +148,7 @@ const char *mmc_mode_name(enum bus_mode mode) [MMC_DDR_52] = "MMC DDR52 (52MHz)", [MMC_HS_200] = "HS200 (200MHz)", [MMC_HS_400] = "HS400 (200MHz)", + [MMC_HS_400_ES] = "HS400ES (200MHz)", };
if (mode >= MMC_MODES_END) @@ -173,6 +174,7 @@ static uint mmc_mode2freq(struct mmc *mmc, enum bus_mode mode) [UHS_SDR104] = 208000000, [MMC_HS_200] = 200000000, [MMC_HS_400] = 200000000, + [MMC_HS_400_ES] = 200000000, };
if (mode == MMC_LEGACY) @@ -788,6 +790,11 @@ static int mmc_set_card_speed(struct mmc *mmc, enum bus_mode mode, case MMC_HS_400: speed_bits = EXT_CSD_TIMING_HS400; break; +#endif +#if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT) + case MMC_HS_400_ES: + speed_bits = EXT_CSD_TIMING_HS400; + break; #endif case MMC_LEGACY: speed_bits = EXT_CSD_TIMING_LEGACY; @@ -859,7 +866,8 @@ static int mmc_get_capabilities(struct mmc *mmc) mmc->card_caps |= MMC_MODE_HS200; } #endif -#if CONFIG_IS_ENABLED(MMC_HS400_SUPPORT) +#if CONFIG_IS_ENABLED(MMC_HS400_SUPPORT) || \ + CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT) if (cardtype & (EXT_CSD_CARD_TYPE_HS400_1_2V | EXT_CSD_CARD_TYPE_HS400_1_8V)) { mmc->card_caps |= MMC_MODE_HS400; @@ -873,6 +881,13 @@ static int mmc_get_capabilities(struct mmc *mmc) if (cardtype & EXT_CSD_CARD_TYPE_26) mmc->card_caps |= MMC_MODE_HS;
+#if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT) + if (ext_csd[EXT_CSD_STROBE_SUPPORT] && + (mmc->card_caps & MMC_MODE_HS400)) { + mmc->card_caps |= MMC_MODE_HS400_ES; + } +#endif + return 0; } #endif @@ -1778,6 +1793,7 @@ static int mmc_set_lowest_voltage(struct mmc *mmc, enum bus_mode mode, u32 card_mask = 0;
switch (mode) { + case MMC_HS_400_ES: case MMC_HS_400: case MMC_HS_200: if (mmc->cardtype & (EXT_CSD_CARD_TYPE_HS200_1_8V | @@ -1820,6 +1836,12 @@ static inline int mmc_set_lowest_voltage(struct mmc *mmc, enum bus_mode mode, #endif
static const struct mode_width_tuning mmc_modes_by_pref[] = { +#if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT) + { + .mode = MMC_HS_400_ES, + .widths = MMC_MODE_8BIT, + }, +#endif #if CONFIG_IS_ENABLED(MMC_HS400_SUPPORT) { .mode = MMC_HS_400, @@ -1917,6 +1939,48 @@ static int mmc_select_hs400(struct mmc *mmc) } #endif
+#if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT) +#if !CONFIG_IS_ENABLED(DM_MMC) +static void mmc_set_enhanced_strobe(struct mmc *mmc) +{ +} +#endif +static int mmc_select_hs400es(struct mmc *mmc) +{ + int err; + + err = mmc_set_card_speed(mmc, MMC_HS, true); + if (err) + return err; + + err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH, + EXT_CSD_BUS_WIDTH_8 | EXT_CSD_DDR_FLAG | + EXT_CSD_BUS_WIDTH_STROBE); + if (err) { + printf("switch to bus width for hs400 failed\n"); + return err; + } + /* TODO: driver strength */ + err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING, + EXT_CSD_TIMING_HS400 | (0 << EXT_CSD_DRV_STR_SHIFT)); + if (err) { + printf("switch to hs400 failed\n"); + return err; + } + + mmc_select_mode(mmc, MMC_HS_400_ES); + mmc_set_clock(mmc, mmc->tran_speed, false); + mmc_set_enhanced_strobe(mmc); + + return 0; +} +#else +static int mmc_select_hs400es(struct mmc *mmc) +{ + return -ENOTSUPP; +} +#endif + #define for_each_supported_width(caps, ddr, ecbv) \ for (ecbv = ext_csd_bus_width;\ ecbv < ext_csd_bus_width + ARRAY_SIZE(ext_csd_bus_width);\ @@ -1988,6 +2052,13 @@ static int mmc_select_mode_and_width(struct mmc *mmc, uint card_caps) printf("Select HS400 failed %d\n", err); goto error; } + } else if (mwt->mode == MMC_HS_400_ES) { + err = mmc_select_hs400es(mmc); + if (err) { + printf("Select HS400ES failed %d\n", + err); + goto error; + } } else { /* configure the bus speed (card) */ err = mmc_set_card_speed(mmc, mwt->mode, false); diff --git a/include/mmc.h b/include/mmc.h index 2be3e91fcb..9eb328384e 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -65,6 +65,7 @@ #define MMC_MODE_DDR_52MHz MMC_CAP(MMC_DDR_52) #define MMC_MODE_HS200 MMC_CAP(MMC_HS_200) #define MMC_MODE_HS400 MMC_CAP(MMC_HS_400) +#define MMC_MODE_HS400_ES MMC_CAP(MMC_HS_400_ES)
#define MMC_CAP_NONREMOVABLE BIT(14) #define MMC_CAP_NEEDS_POLL BIT(15) @@ -223,6 +224,7 @@ static inline bool mmc_is_tuning_cmd(uint cmdidx) #define EXT_CSD_BOOT_BUS_WIDTH 177 #define EXT_CSD_PART_CONF 179 /* R/W */ #define EXT_CSD_BUS_WIDTH 183 /* R/W */ +#define EXT_CSD_STROBE_SUPPORT 184 /* R/W */ #define EXT_CSD_HS_TIMING 185 /* R/W */ #define EXT_CSD_REV 192 /* RO */ #define EXT_CSD_CARD_TYPE 196 /* RO */ @@ -264,11 +266,13 @@ static inline bool mmc_is_tuning_cmd(uint cmdidx) #define EXT_CSD_DDR_BUS_WIDTH_4 5 /* Card is in 4 bit DDR mode */ #define EXT_CSD_DDR_BUS_WIDTH_8 6 /* Card is in 8 bit DDR mode */ #define EXT_CSD_DDR_FLAG BIT(2) /* Flag for DDR mode */ +#define EXT_CSD_BUS_WIDTH_STROBE BIT(7) /* Enhanced strobe mode */
#define EXT_CSD_TIMING_LEGACY 0 /* no high speed */ #define EXT_CSD_TIMING_HS 1 /* HS */ #define EXT_CSD_TIMING_HS200 2 /* HS200 */ #define EXT_CSD_TIMING_HS400 3 /* HS400 */ +#define EXT_CSD_DRV_STR_SHIFT 4 /* Driver Strength shift */
#define EXT_CSD_BOOT_ACK_ENABLE (1 << 6) #define EXT_CSD_BOOT_PARTITION_ENABLE (1 << 3) @@ -465,6 +469,11 @@ struct dm_mmc_ops { */ int (*wait_dat0)(struct udevice *dev, int state, int timeout); #endif + +#if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT) + /* set_enhanced_strobe() - set HS400 enhanced strobe */ + void (*set_enhanced_strobe)(struct udevice *dev); +#endif };
#define mmc_get_ops(dev) ((struct dm_mmc_ops *)(dev)->driver->ops) @@ -485,6 +494,7 @@ int mmc_getcd(struct mmc *mmc); int mmc_getwp(struct mmc *mmc); int mmc_execute_tuning(struct mmc *mmc, uint opcode); int mmc_wait_dat0(struct mmc *mmc, int state, int timeout); +void mmc_set_enhanced_strobe(struct mmc *mmc);
#else struct mmc_ops { @@ -530,6 +540,7 @@ enum bus_mode { UHS_SDR104, MMC_HS_200, MMC_HS_400, + MMC_HS_400_ES, MMC_MODES_END };
@@ -547,6 +558,10 @@ static inline bool mmc_is_mode_ddr(enum bus_mode mode) #if CONFIG_IS_ENABLED(MMC_HS400_SUPPORT) else if (mode == MMC_HS_400) return true; +#endif +#if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT) + else if (mode == MMC_HS_400_ES) + return true; #endif else return false;