Merge USBNC register layout structure into a single one, instead of having three separate structures and a lot of ifdeffery. No functional change.
Signed-off-by: Marek Vasut marex@denx.de Cc: Fabio Estevam festevam@gmail.com Cc: Peng Fan peng.fan@nxp.com Cc: Stefano Babic sbabic@denx.de Cc: Ye Li ye.li@nxp.com Cc: uboot-imx uboot-imx@nxp.com --- drivers/usb/host/ehci-mx6.c | 53 +++++++++++++------------------------ 1 file changed, 19 insertions(+), 34 deletions(-)
diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c index ecc79cb54b6..b0703502db0 100644 --- a/drivers/usb/host/ehci-mx6.c +++ b/drivers/usb/host/ehci-mx6.c @@ -68,6 +68,24 @@ DECLARE_GLOBAL_DATA_PTR; #define UCMD_RUN_STOP (1 << 0) /* controller run/stop */ #define UCMD_RESET (1 << 1) /* controller reset */
+/* Base address for this IP block is 0x02184800 */ +struct usbnc_regs { + u32 ctrl[4]; /* otg/host1-3 */ + u32 uh2_hsic_ctrl; + u32 uh3_hsic_ctrl; + u32 otg_phy_ctrl_0; + u32 uh1_phy_ctrl_0; + u32 reserve1[4]; + u32 phy_cfg1; + u32 phy_cfg2; + u32 reserve2; + u32 phy_status; + u32 reserve3[4]; + u32 adp_cfg1; + u32 adp_cfg2; + u32 adp_status; +}; + #if defined(CONFIG_MX6) || defined(CONFIG_MX7ULP) static const unsigned phy_bases[] = { USB_PHY0_BASE_ADDR, @@ -207,39 +225,7 @@ int usb_phy_mode(int port) return USB_INIT_HOST; }
-#if defined(CONFIG_MX7ULP) -struct usbnc_regs { - u32 ctrl1; - u32 ctrl2; - u32 reserve0[2]; - u32 hsic_ctrl; -}; -#else -/* Base address for this IP block is 0x02184800 */ -struct usbnc_regs { - u32 ctrl[4]; /* otg/host1-3 */ - u32 uh2_hsic_ctrl; - u32 uh3_hsic_ctrl; - u32 otg_phy_ctrl_0; - u32 uh1_phy_ctrl_0; -}; -#endif - #elif defined(CONFIG_MX7) -struct usbnc_regs { - u32 ctrl1; - u32 ctrl2; - u32 reserve1[10]; - u32 phy_cfg1; - u32 phy_cfg2; - u32 reserve2; - u32 phy_status; - u32 reserve3[4]; - u32 adp_cfg1; - u32 adp_cfg2; - u32 adp_status; -}; - static void usb_power_config(int index) { struct usbnc_regs *usbnc = (struct usbnc_regs *)(USB_BASE_ADDR + @@ -274,12 +260,11 @@ static void usb_oc_config(int index) #if defined(CONFIG_MX6) struct usbnc_regs *usbnc = (struct usbnc_regs *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET); - void __iomem *ctrl = (void __iomem *)(&usbnc->ctrl[index]); #elif defined(CONFIG_MX7) || defined(CONFIG_MX7ULP) struct usbnc_regs *usbnc = (struct usbnc_regs *)(USB_BASE_ADDR + (0x10000 * index) + USBNC_OFFSET); - void __iomem *ctrl = (void __iomem *)(&usbnc->ctrl1); #endif + void __iomem *ctrl = (void __iomem *)(&usbnc->ctrl[index]);
#if CONFIG_MACH_TYPE == MACH_TYPE_MX6Q_ARM2 /* mx6qarm2 seems to required a different setting*/