On Mon, Aug 19, 2013 at 04:38:55PM +0200, Heiko Schocher wrote:
add support for the am335x based boards from siemens:
dxr2:
- DDR3 128MiB
- NAND 256MiB
- Ethernet with external Switch SMSC LAN9303
- no PMIC
- internal Watchdog
- DFU support
pxm2:
- DDR2 512 MiB
- NAND 1024 MiB
- PMIC
- PHY atheros ar803x
- USB Host
- internal Watchdog
- DFU support
rut:
- DDR3 256 MiB
- NAND 256 MiB
- PMIC
- PHY natsemi dp83630
- external Watchdog
- DFU support
Signed-off-by: Heiko Schocher hs@denx.de Signed-off-by: Roger Meier r.meier@siemens.com Signed-off-by: Samuel Egli samuel.egli@siemens.com Cc: Pascal Bach pascal.bach@siemens.com Cc: Tom Rini trini@ti.com
- changes for v2:
- add a more detailed comment, from where the files are based
- add missing (C)
- changes for v3:
- rebased against u-boot-ti commit bb2a5d8f87fffb4fadfb205837decbd1b3e75f88
- updated with lokeshs v2 patches
- rebased arm, am33xx: add defines for gmii_sel_register bits patch, and therefore added to this patchserie
- add bd_ram_ofs to cpsw_data in board code needed since commit 2bf36ac638ab2db9f0295aa47064976eeebf80c1
- changes for v4:
- rebased against u-boot-ti commit 425faf74cd8189c87919f7e72a0101c684ee3b9f therefore added define CONFIG_OMAP_COMMON
- add video splash screen support Therefor needed patches (already applied to u-boot-video.git):
[U-Boot,2/7] video, da8xx: move da8xx-fb.h to drivers/video http://patchwork.ozlabs.org/patch/264387/ applied [U-Boot,3/7] arm, am33xx: add clk_get prototype http://patchwork.ozlabs.org/patch/264389/ applied [U-Boot,4/7] video, da8xx-fb: changes for am335x usage http://patchwork.ozlabs.org/patch/264388/ applied [U-Boot,5/7] video, da8xx-fb: show fb addr in bdinfo http://patchwork.ozlabs.org/patch/264392/ applied [U-Boot,6/7] tools, bmp_logo: fix index from uint16_t to int to allow bigger logos http://patchwork.ozlabs.org/patch/264391/ applied [U-Boot,7/7] video: add an option to skip cfb console init http://patchwork.ozlabs.org/patch/264390/ applied
for patch[U-Boot,1/7] arm, am335x: add some missing registers and defines for lcd and epwm support http://patchwork.ozlabs.org/patch/264386/
are changes requested, so added this updated patch to this patchserie
The bmp in u-boot:/tools/logos/siemens.bmp is used as logo. on the rut board: get "DISP1.name" from factoryset, and search it in the list of known displays. If found use this display, if not use display "KWH043ST20-F01" as default.
new patch needed for the rut board splash screen support: video: add formike lcd panel init
update list of needed patches
Needed patches:
- [U-Boot] arm, spl: add watchdog library to SPL http://patchwork.ozlabs.org/patch/248503/ reposted with this patchserie
- [U-Boot] arm, arm335x: add watchdog support http://patchwork.ozlabs.org/patch/248504/ reposted with this patchserie
- [U-Boot,v2] arm, am33xx: add defines for gmii_sel_register bits http://patchwork.ozlabs.org/patch/248916/ added in v3 to this patchseries as rebased against u-boot-ti
- [U-Boot,v5] dfu, nand, ubi: add partubi alt settings for updating ubi partition http://patchwork.ozlabs.org/patch/261583/
Tested patches with this patch:
- [U-Boot] dfu: Implementation of target reset after communication with dfu-util's -R switch http://patchwork.ozlabs.org/patch/260041/
- [U-Boot] ARM: OMAP: GPIO: Fix valid range and enable usage of all GPIOs on OMAP5 http://patchwork.ozlabs.org/patch/253185/
Heiko Schocher (6): arm, am33xx: add defines for gmii_sel_register bits arm, am335x: add some missing registers and defines for lcd and epwm support arm, spl: add watchdog library to SPL arm, am335x: add watchdog support video: add formike lcd panel init arm, am335x: add support for 3 siemens boards
MAINTAINERS | 5 + arch/arm/include/asm/arch-am33xx/cpu.h | 74 ++- arch/arm/include/asm/arch-am33xx/hardware_am33xx.h | 7 + board/isee/igep0033/board.c | 6 +- board/phytec/pcm051/board.c | 2 - board/siemens/common/board.c | 171 +++++++ board/siemens/common/factoryset.c | 284 ++++++++++++ board/siemens/common/factoryset.h | 27 ++ board/siemens/dxr2/Makefile | 49 ++ board/siemens/dxr2/board.c | 241 ++++++++++ board/siemens/dxr2/board.h | 69 +++ board/siemens/dxr2/mux.c | 112 +++++ board/siemens/pxm2/Makefile | 49 ++ board/siemens/pxm2/board.c | 429 +++++++++++++++++ board/siemens/pxm2/board.h | 22 + board/siemens/pxm2/mux.c | 186 ++++++++ board/siemens/pxm2/pmic.h | 71 +++ board/siemens/rut/Makefile | 49 ++ board/siemens/rut/board.c | 432 +++++++++++++++++ board/siemens/rut/board.h | 22 + board/siemens/rut/mux.c | 347 ++++++++++++++ board/ti/am335x/board.c | 6 +- boards.cfg | 3 + doc/README.SPL | 2 +- drivers/video/Makefile | 1 + drivers/video/formike.c | 511 +++++++++++++++++++++ drivers/watchdog/Makefile | 1 + drivers/watchdog/omap_wdt.c | 121 +++++ include/configs/dxr2.h | 94 ++++ include/configs/pxm2.h | 153 ++++++ include/configs/rut.h | 156 +++++++ include/configs/siemens-am33x-common.h | 463 +++++++++++++++++++ include/video.h | 4 + spl/Makefile | 1 + tools/logos/siemens.bmp | Bin 0 -> 25766 bytes 35 Dateien ge??ndert, 4157 Zeilen hinzugef??gt(+), 13 Zeilen entfernt(-) create mode 100644 board/siemens/common/board.c create mode 100644 board/siemens/common/factoryset.c create mode 100644 board/siemens/common/factoryset.h create mode 100644 board/siemens/dxr2/Makefile create mode 100644 board/siemens/dxr2/board.c create mode 100644 board/siemens/dxr2/board.h create mode 100644 board/siemens/dxr2/mux.c create mode 100644 board/siemens/pxm2/Makefile create mode 100644 board/siemens/pxm2/board.c create mode 100644 board/siemens/pxm2/board.h create mode 100644 board/siemens/pxm2/mux.c create mode 100644 board/siemens/pxm2/pmic.h create mode 100644 board/siemens/rut/Makefile create mode 100644 board/siemens/rut/board.c create mode 100644 board/siemens/rut/board.h create mode 100644 board/siemens/rut/mux.c create mode 100644 drivers/video/formike.c create mode 100644 drivers/watchdog/omap_wdt.c create mode 100644 include/configs/dxr2.h create mode 100644 include/configs/pxm2.h create mode 100644 include/configs/rut.h create mode 100644 include/configs/siemens-am33x-common.h create mode 100644 tools/logos/siemens.bmp
With the patch I sent to always build with CONFIG_OMAP_GPIO set (needed for changes in master), this is applied to u-boot-ti/master, thanks!