The board have only 128 Mb of memory and only two first memory banks are used. Also remove unneeded CONFIG_SYS_DRAM_SIZE constant and set default load address to be in sdram.
PS: This patch should not go upstream at this point as it specific to my revision of voipac
Signed-off-by: Mikhail Kshevetskiy mikhail.kshevetskiy@gmail.com --- include/configs/vpac270.h | 17 ++++++++++------- 1 files changed, 10 insertions(+), 7 deletions(-)
diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h index c92eb40..b04d1e8 100644 --- a/include/configs/vpac270.h +++ b/include/configs/vpac270.h @@ -166,19 +166,22 @@ /* * DRAM Map */ -#define CONFIG_NR_DRAM_BANKS 2 /* We have 2 banks of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ -#define PHYS_SDRAM_2 0x80000000 /* SDRAM Bank #2 */ -#define PHYS_SDRAM_2_SIZE 0x08000000 /* 128 MB */ +#define CONFIG_NR_DRAM_BANKS 4 /* We have 2 banks of DRAM */ +#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ +#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ +#define PHYS_SDRAM_2_SIZE 0x04000000 /* 64 MB */ +#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ +#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ +#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ +#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */
#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */ -#define CONFIG_SYS_DRAM_SIZE 0x10000000 /* 256 MB DRAM */
#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
-#define CONFIG_SYS_LOAD_ADDR (0x5c000000) +#define CONFIG_SYS_LOAD_ADDR 0xa0000000
/* * NOR FLASH