Re: [U-Boot] [PATCH] powerpc/mpc85xx: set L2PE in L2CSR0 before enabling L2 cache

On 04/18/2016 05:16 AM, Aneesh Bansal wrote:

While enabling L2 cache, the value of L2PE (L2 cache parity/ECC error checking enable) must not be changed while the L2 cache is enabled. So, L2PE must be set before enabling L2 cache.

Signed-off-by: Aneesh Bansal aneesh.bansal@nxp.com

arch/powerpc/cpu/mpc85xx/start.S | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)

Applied to u-boot-mpc85xx master branch, awaiting upstream.

Thanks.

York