Hi Marek,
On Fri, Jul 21, 2017 at 6:06 PM, Marek Vasut marex@denx.de wrote:
On 07/21/2017 12:04 PM, Bin Meng wrote:
Hi Marek,
On Fri, Jul 21, 2017 at 4:56 PM, Marek Vasut marex@denx.de wrote:
On 07/21/2017 10:54 AM, Bin Meng wrote:
Hi Marek,
On Thu, Jul 20, 2017 at 8:20 PM, Marek Vasut marex@denx.de wrote:
On 07/20/2017 02:16 PM, Bin Meng wrote:
Hi Marek,
On Thu, Jul 20, 2017 at 7:12 AM, Bin Meng bmeng.cn@gmail.com wrote: > This series is the final series of the xHCI driver update. > > This adds the missing interrupt transfer support to xHCI driver, so > that devices like USB keyboard that uses interrupt transfer when > CONFIG_SYS_USB_EVENT_POLL is defined can work. > > This also adds full speed device support. Unlike low/high/super speed > devices, full speed device may report its endpoint 0 max packet size > as 8/16/32/64. xHCI driver guesses 64 for the first attempt to get the > initial 8 bytes device descriptor, and later adjusts the context for > endpoint 0. > > This series also made several updates to xHCI driver to conform with > the spec. > > Previous two series: > [1]: usb: xhci: Fix USB xHCI support on Intel platform > https://lists.denx.de/pipermail/u-boot/2017-June/296166.html > [2]: usb: hub: Support USB 3.0 hubs > https://lists.denx.de/pipermail/u-boot/2017-June/296284.html > > This series is available at u-boot-x86/xhci-working3 for testing. > > Changes in v3: > - rebase on u-boot-usb/master > - add changes to poplar.h > > Bin Meng (13): > usb: xhci: Add interrupt transfer support > usb: configs: Clean up CONFIG_SYS_USB_EVENT_POLL_(xxx) in board > configs > usb: kbd: kconfig: Set a default polling mechanism for USB keyboard > usb: Only get 64 bytes device descriptor for full speed devices > usb: Read device descriptor after device is addressed for xHCI > usb: xhci: Fix max packet size for full speed device endpoint 0 > usb: hub: Clear port reset before usb_hub_port_connect_change() > usb: hub: Clear BH reset status change for a 3.0 hub > usb: Handle audio extension endpoint descriptor in usb_parse_config() > usb: xhci: Honor endpoint's interval > usb: xhci: Program max burst size for endpoint > usb: xhci: Set 'Error Count' to 0 for isoch endpoints > usb: xhci: Set 'Average TRB Length' to 8 for control endpoints >
This is the last xHCI series I have. Can you please take a look and apply?
I'd like to see some RB/TB from Stefan Roese first if possible.
OK, if that's the case, can you send a pull request to Tom to get usb in? So that I can apply Stefan's x86 patch series on top of this. (I cannot send PR for x86 before the usb changes)
I actually cannot because the USB is currently broken, sorry, I'm waiting for a fix before I do that.
Stefan, can you look at this series please?
What "broken" issues are you seeing?
I think Layerscape stopped building. Look at email with this subject "Compile failure encountered on latest (2017-07-20) git://git.denx.de/u-boot-usb.git branch master for target ls1021atwr_nor_defconfig"
I see Patrice is working on a fix for the build failure.
Regards, Bin