Common practice on Tegra 2 boards is to use the pllp_out4 FO to generate the ULPI reference clock. For this to work we have to override the default hardware generated output divider.
This function adds a clean way to do so.
Signed-off-by: Lucas Stach dev@lynxeye.de --- arch/arm/cpu/tegra20-common/clock.c | 25 +++++++++++++++++++++++++ arch/arm/cpu/tegra20-common/warmboot_avp.c | 2 +- arch/arm/include/asm/arch-tegra20/clk_rst.h | 11 +++++++++-- arch/arm/include/asm/arch-tegra20/clock.h | 19 +++++++++++++++++++ 4 Dateien geändert, 54 Zeilen hinzugefügt(+), 3 Zeilen entfernt(-)
diff --git a/arch/arm/cpu/tegra20-common/clock.c b/arch/arm/cpu/tegra20-common/clock.c index d9bb851..068b552 100644 --- a/arch/arm/cpu/tegra20-common/clock.c +++ b/arch/arm/cpu/tegra20-common/clock.c @@ -604,6 +604,31 @@ unsigned long clock_get_periph_rate(enum periph_id periph_id, (readl(reg) & OUT_CLK_DIVISOR_MASK) >> OUT_CLK_DIVISOR_SHIFT); }
+int clock_set_pllout(enum clock_id clkid, enum pll_out_id pllout, unsigned rate) +{ + struct clk_pll *pll = get_pll(clkid); + int data = 0, div = 0, offset = 0; + + if (!clock_id_is_pll(clkid)) + return -1; + + div = clk_get_divider(8, pll_rate[clkid], rate); + + if (div < 0) + return -1; + + /* out2 and out4 are in the high part of the register */ + if (pllout == PLL_OUT2 || pllout == PLL_OUT4) + offset = 16; + + data = (div << PLL_OUT_RATIO_SHIFT) | + PLL_OUT_OVRRIDE | PLL_OUT_CLKEN | PLL_OUT_RSTN; + clrsetbits_le32(&pll->pll_out[pllout >> 1], + PLL_OUT_RATIO_MASK << offset, data << offset); + + return 0; +} + /** * Find the best available 7.1 format divisor given a parent clock rate and * required child clock rate. This function assumes that a second-stage diff --git a/arch/arm/cpu/tegra20-common/warmboot_avp.c b/arch/arm/cpu/tegra20-common/warmboot_avp.c index cd01908..f6c71cb 100644 --- a/arch/arm/cpu/tegra20-common/warmboot_avp.c +++ b/arch/arm/cpu/tegra20-common/warmboot_avp.c @@ -214,7 +214,7 @@ void wb_start(void)
reg = PLLM_OUT1_RSTN_RESET_DISABLE | PLLM_OUT1_CLKEN_ENABLE | PLLM_OUT1_RATIO_VAL_8; - writel(reg, &clkrst->crc_pll[CLOCK_ID_MEMORY].pll_out); + writel(reg, &clkrst->crc_pll[CLOCK_ID_MEMORY].pll_out[0]);
reg = SCLK_SWAKE_FIQ_SRC_PLLM_OUT1 | SCLK_SWAKE_IRQ_SRC_PLLM_OUT1 | SCLK_SWAKE_RUN_SRC_PLLM_OUT1 | SCLK_SWAKE_IDLE_SRC_PLLM_OUT1 | diff --git a/arch/arm/include/asm/arch-tegra20/clk_rst.h b/arch/arm/include/asm/arch-tegra20/clk_rst.h index 8c3be91..7b548c2 100644 --- a/arch/arm/include/asm/arch-tegra20/clk_rst.h +++ b/arch/arm/include/asm/arch-tegra20/clk_rst.h @@ -27,8 +27,7 @@ /* PLL registers - there are several PLLs in the clock controller */ struct clk_pll { uint pll_base; /* the control register */ - uint pll_out; /* output control */ - uint reserved; + uint pll_out[2]; /* output control */ uint pll_misc; /* other misc things */ };
@@ -112,6 +111,14 @@ struct clk_rst_ctlr { #define PLL_DIVM_SHIFT 0 #define PLL_DIVM_MASK (0x1f << PLL_DIVM_SHIFT)
+/* CLK_RST_CONTROLLER_PLLx_OUTx_0 */ +#define PLL_OUT_RSTN (1 << 0) +#define PLL_OUT_CLKEN (1 << 1) +#define PLL_OUT_OVRRIDE (1 << 2) + +#define PLL_OUT_RATIO_SHIFT 8 +#define PLL_OUT_RATIO_MASK (0xffU << PLL_OUT_RATIO_SHIFT) + /* CLK_RST_CONTROLLER_PLLx_MISC_0 */ #define PLL_CPCON_SHIFT 8 #define PLL_CPCON_MASK (15U << PLL_CPCON_SHIFT) diff --git a/arch/arm/include/asm/arch-tegra20/clock.h b/arch/arm/include/asm/arch-tegra20/clock.h index 20db9e6..dfef51e 100644 --- a/arch/arm/include/asm/arch-tegra20/clock.h +++ b/arch/arm/include/asm/arch-tegra20/clock.h @@ -186,6 +186,13 @@ enum periph_id { PERIPH_ID_NONE = -1, };
+enum pll_out_id { + PLL_OUT1, + PLL_OUT2, + PLL_OUT3, + PLL_OUT4 +}; + /* Converts a clock number to a clock register: 0=L, 1=H, 2=U */ #define PERIPH_REG(id) ((id) >> 5)
@@ -218,6 +225,18 @@ unsigned long clock_start_pll(enum clock_id id, u32 divm, u32 divn, u32 divp, u32 cpcon, u32 lfcon);
/** + * Set PLL output frequency + * + * @param clkid clock id + * @param pllout pll output id ( + * @param rate desired output rate + * + * @return 0 if ok, -1 on error (invalid clock id or no suitable divider) + */ +int clock_set_pllout(enum clock_id clkid, enum pll_out_id pllout, + unsigned rate); + +/** * Read low-level parameters of a PLL. * * @param id clock id to read (note: USB is not supported)