On 8/18/20 10:08 AM, Marek Vasut wrote:
On 8/18/20 4:34 PM, Jason Wessel wrote:
When resetting the rpi3 board sometimes it will display: USB device not accepting new address (error=0)
After the message appears, the usb keyboard will not work. It seems that the configuration actually did succeed however. Checking the device status for a return code of zero and continuing allows the usb keyboard and other usb devices to work function.
Signed-off-by: Jason Wessel jason.wessel@windriver.com
common/usb.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/common/usb.c b/common/usb.c index aad13fd9c5..0eb5d40a2d 100644 --- a/common/usb.c +++ b/common/usb.c @@ -1054,11 +1054,12 @@ static int usb_prepare_device(struct usb_device *dev, int addr, bool do_read, dev->devnum = addr;
err = usb_set_address(dev); /* set address */
- if (err < 0) {
- if (err < 0)
debug("\n usb_set_address return < 0\n");Please print the return code here.
Good idea.
Is dev->status always set by usb_set_address() when err < 0 ?
Yes. The status is filled in as far as I can tell. I had received other values when exceeding timing thresholds with too many printfs() to the serial port while debugging.
The usb hardware hardware devices seem to like their initialization to be completed in a timely manner.
Jason.
- if (err < 0 && dev->status != 0) { printf("\n USB device not accepting new address " \ "(error=%lX)\n", dev->status);
return err;
return err;}
mdelay(10); /* Let the SET_ADDRESS settle */