Signed-off-by: Marek Vasut marek.vasut@gmail.com Cc: Robert Schwebel robert@schwebel.de Cc: Albert ARIBAUD albert.u.boot@aribaud.net --- MAINTAINERS | 5 - board/csb226/Makefile | 43 ---- board/csb226/csb226.c | 166 --------------- board/csb226/flash.c | 368 -------------------------------- board/innokom/Makefile | 43 ---- board/innokom/flash.c | 421 ------------------------------------- board/innokom/innokom.c | 190 ----------------- boards.cfg | 2 - include/configs/csb226.h | 506 -------------------------------------------- include/configs/innokom.h | 507 --------------------------------------------- 10 files changed, 0 insertions(+), 2251 deletions(-) delete mode 100644 board/csb226/Makefile delete mode 100644 board/csb226/csb226.c delete mode 100644 board/csb226/flash.c delete mode 100644 board/innokom/Makefile delete mode 100644 board/innokom/flash.c delete mode 100644 board/innokom/innokom.c delete mode 100644 include/configs/csb226.h delete mode 100644 include/configs/innokom.h
diff --git a/MAINTAINERS b/MAINTAINERS index 21d1fef..0a85df7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -812,11 +812,6 @@ Heiko Schocher hs@denx.de magnesium i.MX27 mgcoge3un ARM926EJS (Kirkwood SoC)
-Robert Schwebel r.schwebel@pengutronix.de - - csb226 xscale/pxa - innokom xscale/pxa - Michael Schwingen michael@schwingen.org
actux1 xscale/ixp diff --git a/board/csb226/Makefile b/board/csb226/Makefile deleted file mode 100644 index 6fe9bec..0000000 --- a/board/csb226/Makefile +++ /dev/null @@ -1,43 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := csb226.o flash.o - -SRCS := $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) - -$(LIB): $(obj).depend $(OBJS) - $(call cmd_link_o_target, $(OBJS)) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/csb226/csb226.c b/board/csb226/csb226.c deleted file mode 100644 index dd29e62..0000000 --- a/board/csb226/csb226.c +++ /dev/null @@ -1,166 +0,0 @@ -/* - * (C) Copyright 2002 - * Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de - * Kyle Harris, Nexus Technologies, Inc., kharris@nexus-tech.net - * Marius Groeger, Sysgo Real-Time Solutions GmbH, mgroeger@sysgo.de - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <netdev.h> -#include <asm/arch/pxa-regs.h> -#include <asm/io.h> - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_SHOW_BOOT_PROGRESS -# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) -#else -# define SHOW_BOOT_PROGRESS(arg) -#endif - -/** - * misc_init_r: - misc initialisation routines - */ - -int misc_init_r(void) -{ -#if 0 - uchar *str; - - /* determine if the software update key is pressed during startup */ - /* not ported yet... */ - if (GPLR0 & 0x00000800) { - printf("using bootcmd_normal (sw-update button not pressed)\n"); - str = getenv("bootcmd_normal"); - } else { - printf("using bootcmd_update (sw-update button pressed)\n"); - str = getenv("bootcmd_update"); - } - - setenv("bootcmd",str); -#endif - return 0; -} - - -/** - * board_init: - setup some data structures - * - * @return: 0 in case of success - */ - -int board_init (void) -{ - /* We have RAM, disable cache */ - dcache_disable(); - icache_disable(); - - /* arch number of CSB226 board */ - gd->bd->bi_arch_number = MACH_TYPE_CSB226; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0xa0000100; - - return 0; -} - - -extern void pxa_dram_init(void); -int dram_init(void) -{ - pxa_dram_init(); - gd->ram_size = PHYS_SDRAM_1_SIZE; - return 0; -} - -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -} - -/** - * csb226_set_led: - switch LEDs on or off - * - * @param led: LED to switch (0,1,2) - * @param state: switch on (1) or off (0) - */ - -void csb226_set_led(int led, int state) -{ - switch(led) { - - case 0: if (state==1) { - writel(readl(GPCR0) | CSB226_USER_LED0, GPCR0); - } else if (state==0) { - writel(readl(GPSR0) | CSB226_USER_LED0, GPSR0); - } - break; - - case 1: if (state==1) { - writel(readl(GPCR0) | CSB226_USER_LED1, GPCR0); - } else if (state==0) { - writel(readl(GPSR0) | CSB226_USER_LED1, GPSR0); - } - break; - - case 2: if (state==1) { - writel(readl(GPCR0) | CSB226_USER_LED2, GPCR0); - } else if (state==0) { - writel(readl(GPSR0) | CSB226_USER_LED2, GPSR0); - } - break; - } - - return; -} - - -/** - * show_boot_progress: - indicate state of the boot process - * - * @param status: Status number - see README for details. - * - * The CSB226 does only have 3 LEDs, so we switch them on at the most - * important states (1, 5, 15). - */ - -void show_boot_progress (int status) -{ - switch(status) { - case 1: csb226_set_led(0,1); break; - case 5: csb226_set_led(1,1); break; - case 15: csb226_set_led(2,1); break; - } - - return; -} - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_CS8900 - rc = cs8900_initialize(0, CONFIG_CS8900_BASE); -#endif - return rc; -} -#endif diff --git a/board/csb226/flash.c b/board/csb226/flash.c deleted file mode 100644 index e103470..0000000 --- a/board/csb226/flash.c +++ /dev/null @@ -1,368 +0,0 @@ -/* - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger mgroeger@sysgo.de - * - * (C) Copyright 2002 - * Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de - * - * (C) Copyright 2003 (2 x 16 bit Flash bank patches) - * Rolf Peukert, IMMS gGmbH, rolf.peukert@imms.de - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/arch/pxa-regs.h> - -#define FLASH_BANK_SIZE 0x02000000 -#define MAIN_SECT_SIZE 0x40000 /* 2x16 = 256k per sector */ - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - - -/** - * flash_init: - initialize data structures for flash chips - * - * @return: size of the flash - */ - -ulong flash_init(void) -{ - int i, j; - ulong size = 0; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - ulong flashbase = 0; - flash_info[i].flash_id = - (INTEL_MANUFACT & FLASH_VENDMASK) | - (INTEL_ID_28F128J3 & FLASH_TYPEMASK); - flash_info[i].size = FLASH_BANK_SIZE; - flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT; - memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT); - - switch (i) { - case 0: - flashbase = PHYS_FLASH_1; - break; - default: - panic("configured too many flash banks!\n"); - break; - } - for (j = 0; j < flash_info[i].sector_count; j++) { - flash_info[i].start[j] = flashbase + j*MAIN_SECT_SIZE; - } - size += flash_info[i].size; - } - - /* Protect monitor and environment sectors */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, - &flash_info[0]); - - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, - &flash_info[0]); - - return size; -} - - -/** - * flash_print_info: - print information about the flash situation - */ - -void flash_print_info (flash_info_t *info) -{ - int i, j; - - for (j=0; j<CONFIG_SYS_MAX_FLASH_BANKS; j++) { - - switch (info->flash_id & FLASH_VENDMASK) { - case (INTEL_MANUFACT & FLASH_VENDMASK): - printf ("Intel: "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case (INTEL_ID_28F128J3 & FLASH_TYPEMASK): - printf("28F128J3 (128Mbit)\n"); - break; - default: - printf("Unknown Chip Type\n"); - return; - } - - printf(" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf(" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; i++) { - if ((i % 5) == 0) printf ("\n "); - - printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - info++; - } -} - - -/** - * flash_erase: - erase flash sectors - */ - -int flash_erase(flash_info_t *info, int s_first, int s_last) -{ - int flag, prot, sect; - int rc = ERR_OK; - ulong start; - - if (info->flash_id == FLASH_UNKNOWN) - return ERR_UNKNOWN_FLASH_TYPE; - - if ((s_first < 0) || (s_first > s_last)) { - return ERR_INVAL; - } - - if ((info->flash_id & FLASH_VENDMASK) != (INTEL_MANUFACT & FLASH_VENDMASK)) - return ERR_UNKNOWN_FLASH_VENDOR; - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) prot++; - } - - if (prot) return ERR_PROTECTED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - - flag = disable_interrupts(); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last && !ctrlc(); sect++) { - - printf("Erasing sector %2d ... ", sect); - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - if (info->protect[sect] == 0) { /* not protected */ - u32 * volatile addr = (u32 * volatile)(info->start[sect]); - - /* erase sector: */ - /* The strata flashs are aligned side by side on */ - /* the data bus, so we have to write the commands */ - /* to both chips here: */ - - *addr = 0x00200020; /* erase setup */ - *addr = 0x00D000D0; /* erase confirm */ - - while ((*addr & 0x00800080) != 0x00800080) { - if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { - *addr = 0x00B000B0; /* suspend erase*/ - *addr = 0x00FF00FF; /* read mode */ - rc = ERR_TIMOUT; - goto outahere; - } - } - *addr = 0x00500050; /* clear status register cmd. */ - *addr = 0x00FF00FF; /* reset to read mode */ - } - printf("ok.\n"); - } - if (ctrlc()) printf("User Interrupt!\n"); - -outahere: - /* allow flash to settle - wait 10 ms */ - udelay_masked(10000); - - if (flag) enable_interrupts(); - - return rc; -} - -/** - * write_long: - copy memory to flash, assume a bank of 2 devices with 16bit each - */ - -static int write_long (flash_info_t *info, ulong dest, ulong data) -{ - u32 * volatile addr = (u32 * volatile)dest, val; - int rc = ERR_OK; - int flag; - ulong start; - - /* read array command - just for the case... */ - *addr = 0x00FF00FF; - - /* Check if Flash is (sufficiently) erased */ - if ((*addr & data) != data) return ERR_NOT_ERASED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - flag = disable_interrupts(); - - /* clear status register command */ - *addr = 0x00500050; - - /* program set-up command */ - *addr = 0x00400040; - - /* latch address/data */ - *addr = data; - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - /* wait while polling the status register */ - while(((val = *addr) & 0x00800080) != 0x00800080) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - rc = ERR_TIMOUT; - /* suspend program command */ - *addr = 0x00B000B0; - goto outahere; - } - } - - /* check for errors */ - if(val & 0x001A001A) { - printf("\nFlash write error %02x at address %08lx\n", - (int)val, (unsigned long)dest); - if(val & 0x00080008) { - printf("Voltage range error.\n"); - rc = ERR_PROG_ERROR; - goto outahere; - } - if(val & 0x00020002) { - printf("Device protect error.\n"); - rc = ERR_PROTECTED; - goto outahere; - } - if(val & 0x00100010) { - printf("Programming error.\n"); - rc = ERR_PROG_ERROR; - goto outahere; - } - rc = ERR_PROG_ERROR; - goto outahere; - } - -outahere: - /* read array command */ - *addr = 0x00FF00FF; - if (flag) enable_interrupts(); - - return rc; -} - - -/** - * write_buf: - Copy memory to flash. - * - * @param info: - * @param src: source of copy transaction - * @param addr: where to copy to - * @param cnt: number of bytes to copy - * - * @return error code - */ - -/* "long" version, uses 32bit words */ -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp; - ulong data; - int l; - int i, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i<l; ++i, ++cp) { - data = (data >> 8) | (*(uchar *)cp << 24); - } - for (; i<4 && cnt>0; ++i) { - data = (data >> 8) | (*src++ << 24); - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data >> 8) | (*(uchar *)cp << 24); - } - - if ((rc = write_long(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = *((ulong*)src); - if ((rc = write_long(info, wp, data)) != 0) { - return (rc); - } - src += 4; - wp += 4; - cnt -= 4; - } - - if (cnt == 0) return ERR_OK; - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data >> 8) | (*src++ << 24); - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data >> 8) | (*(uchar *)cp << 24); - } - - return write_long(info, wp, data); -} diff --git a/board/innokom/Makefile b/board/innokom/Makefile deleted file mode 100644 index 8b58b7f..0000000 --- a/board/innokom/Makefile +++ /dev/null @@ -1,43 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := innokom.o flash.o - -SRCS := $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) - -$(LIB): $(obj).depend $(OBJS) - $(call cmd_link_o_target, $(OBJS)) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/innokom/flash.c b/board/innokom/flash.c deleted file mode 100644 index ed4b987..0000000 --- a/board/innokom/flash.c +++ /dev/null @@ -1,421 +0,0 @@ -/* - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger mgroeger@sysgo.de - * - * (C) Copyright 2002 - * Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de - * - * (C) Copyright 2002 - * Auerswald GmbH & Co KG, Germany - * Kai-Uwe Bloem kai-uwe.bloem@auerswald.de - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/arch/pxa-regs.h> - -/* Debugging macros ------------------------------------------------------ */ - -#undef FLASH_DEBUG - -/* Some debug macros */ -#if (FLASH_DEBUG > 2 ) -#define PRINTK3(args...) printf(args) -#else -#define PRINTK3(args...) -#endif - -#if FLASH_DEBUG > 1 -#define PRINTK2(args...) printf(args) -#else -#define PRINTK2(args...) -#endif - -#ifdef FLASH_DEBUG -#define PRINTK(args...) printf(args) -#else -#define PRINTK(args...) -#endif - -/* ------------------------------------------------------------------------ */ - -/* Development system: we have only 16 MB Flash */ -#ifdef CONFIG_MTD_INNOKOM_16MB -#define FLASH_BANK_SIZE 0x01000000 /* 16 MB (during development) */ -#define MAIN_SECT_SIZE 0x00020000 /* 128k per sector */ -#endif - -/* Production system: we have 64 MB Flash */ -#ifdef CONFIG_MTD_INNOKOM_64MB -#define FLASH_BANK_SIZE 0x04000000 /* 64 MB */ -#define MAIN_SECT_SIZE 0x00020000 /* 128k per sector */ -#endif - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - -/** - * flash_init: - initialize data structures for flash chips - * - * @return: size of the flash - */ - -ulong flash_init(void) -{ - int i, j; - ulong size = 0; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - ulong flashbase = 0; - flash_info[i].flash_id = - (INTEL_MANUFACT & FLASH_VENDMASK) | - (INTEL_ID_28F128J3 & FLASH_TYPEMASK); - flash_info[i].size = FLASH_BANK_SIZE; - flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT; - memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT); - - switch (i) { - case 0: - flashbase = PHYS_FLASH_1; - break; - default: - panic("configured too many flash banks!\n"); - break; - } - for (j = 0; j < flash_info[i].sector_count; j++) { - flash_info[i].start[j] = flashbase + j*MAIN_SECT_SIZE; - } - size += flash_info[i].size; - } - - /* Protect u-boot sectors */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + (256*1024) - 1, - &flash_info[0]); - -#ifdef CONFIG_ENV_IS_IN_FLASH - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, - &flash_info[0]); -#endif - - return size; -} - - -/** - * flash_print_info: - print information about the flash situation - * - * @param info: - */ - -void flash_print_info (flash_info_t *info) -{ - int i, j; - - for (j=0; j<CONFIG_SYS_MAX_FLASH_BANKS; j++) { - - switch (info->flash_id & FLASH_VENDMASK) { - - case (INTEL_MANUFACT & FLASH_VENDMASK): - printf("Intel: "); - break; - default: - printf("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - - case (INTEL_ID_28F128J3 & FLASH_TYPEMASK): - printf("28F128J3 (128Mbit)\n"); - break; - default: - printf("Unknown Chip Type\n"); - return; - } - - printf(" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf(" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; i++) { - if ((i % 5) == 0) printf ("\n "); - - printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - info++; - } -} - - -/** - * flash_erase: - erase flash sectors - * - */ - -int flash_erase(flash_info_t *info, int s_first, int s_last) -{ - int flag, prot, sect; - int rc = ERR_OK; - ulong start; - - if (info->flash_id == FLASH_UNKNOWN) - return ERR_UNKNOWN_FLASH_TYPE; - - if ((s_first < 0) || (s_first > s_last)) { - return ERR_INVAL; - } - - if ((info->flash_id & FLASH_VENDMASK) != (INTEL_MANUFACT & FLASH_VENDMASK)) - return ERR_UNKNOWN_FLASH_VENDOR; - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) prot++; - } - - if (prot) return ERR_PROTECTED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - - flag = disable_interrupts(); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last && !ctrlc(); sect++) { - - printf("Erasing sector %2d ... ", sect); - - PRINTK("\n"); - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - if (info->protect[sect] == 0) { /* not protected */ - u16 * volatile addr = (u16 * volatile)(info->start[sect]); - - PRINTK("unlocking sector\n"); - *addr = 0x0060; - *addr = 0x00d0; - *addr = 0x00ff; - - PRINTK("erasing sector\n"); - *addr = 0x0020; - PRINTK("confirming erase\n"); - *addr = 0x00D0; - - while ((*addr & 0x0080) != 0x0080) { - PRINTK("."); - if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { - *addr = 0x00B0; /* suspend erase*/ - *addr = 0x00FF; /* read mode */ - rc = ERR_TIMOUT; - goto outahere; - } - } - - PRINTK("clearing status register\n"); - *addr = 0x0050; - PRINTK("resetting to read mode"); - *addr = 0x00FF; - } - - printf("ok.\n"); - } - - if (ctrlc()) printf("User Interrupt!\n"); - - outahere: - - /* allow flash to settle - wait 10 ms */ - udelay_masked(10000); - - if (flag) enable_interrupts(); - - return rc; -} - - -/** - * write_word: - copy memory to flash - * - * @param info: - * @param dest: - * @param data: - * @return: - */ - -static int write_word (flash_info_t *info, ulong dest, ushort data) -{ - volatile u16 *addr = (u16 *)dest, val; - int rc = ERR_OK; - int flag; - ulong start; - - /* Check if Flash is (sufficiently) erased */ - if ((*addr & data) != data) return ERR_NOT_ERASED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - flag = disable_interrupts(); - - /* clear status register command */ - *addr = 0x50; - - /* program set-up command */ - *addr = 0x40; - - /* latch address/data */ - *addr = data; - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - /* wait while polling the status register */ - while(((val = *addr) & 0x80) != 0x80) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - rc = ERR_TIMOUT; - *addr = 0xB0; /* suspend program command */ - goto outahere; - } - } - - if(val & 0x1A) { /* check for error */ - printf("\nFlash write error %02x at address %08lx\n", - (int)val, (unsigned long)dest); - if(val & (1<<3)) { - printf("Voltage range error.\n"); - rc = ERR_PROG_ERROR; - goto outahere; - } - if(val & (1<<1)) { - printf("Device protect error.\n"); - rc = ERR_PROTECTED; - goto outahere; - } - if(val & (1<<4)) { - printf("Programming error.\n"); - rc = ERR_PROG_ERROR; - goto outahere; - } - rc = ERR_PROG_ERROR; - goto outahere; - } - - outahere: - - *addr = 0xFF; /* read array command */ - if (flag) enable_interrupts(); - - return rc; -} - - -/** - * write_buf: - Copy memory to flash. - * - * @param info: - * @param src: source of copy transaction - * @param addr: where to copy to - * @param cnt: number of bytes to copy - * - * @return error code - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp; - ushort data; - int l; - int i, rc; - - wp = (addr & ~1); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i<l; ++i, ++cp) { - data = (data >> 8) | (*(uchar *)cp << 8); - } - for (; i<2 && cnt>0; ++i) { - data = (data >> 8) | (*src++ << 8); - --cnt; - ++cp; - } - for (; cnt==0 && i<2; ++i, ++cp) { - data = (data >> 8) | (*(uchar *)cp << 8); - } - - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 2; - } - - /* - * handle word aligned part - */ - while (cnt >= 2) { - /* data = *((vushort*)src); */ - data = *((ushort*)src); - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - src += 2; - wp += 2; - cnt -= 2; - } - - if (cnt == 0) return ERR_OK; - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<2 && cnt>0; ++i, ++cp) { - data = (data >> 8) | (*src++ << 8); - --cnt; - } - for (; i<2; ++i, ++cp) { - data = (data >> 8) | (*(uchar *)cp << 8); - } - - return write_word(info, wp, data); -} diff --git a/board/innokom/innokom.c b/board/innokom/innokom.c deleted file mode 100644 index 22de7e3..0000000 --- a/board/innokom/innokom.c +++ /dev/null @@ -1,190 +0,0 @@ -/* - * (C) Copyright 2002 - * Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de - * Kyle Harris, Nexus Technologies, Inc., kharris@nexus-tech.net - * Marius Groeger, Sysgo Real-Time Solutions GmbH, mgroeger@sysgo.de - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <netdev.h> -#include <asm/arch/pxa-regs.h> -#include <asm/mach-types.h> -#include <asm/io.h> - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_SHOW_BOOT_PROGRESS -# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) -#else -# define SHOW_BOOT_PROGRESS(arg) -#endif - -/** - * i2c_init_board - reset i2c bus. When the board is powercycled during a - * bus transfer it might hang; for details see doc/I2C_Edge_Conditions. - * The Innokom board has GPIO70 connected to SCLK which can be toggled - * until all chips think that their current cycles are finished. - */ -int i2c_init_board(void) -{ - int i; - - /* set gpio pin low _before_ we change direction to output */ - writel(GPIO_bit(70), GPCR(70)); - - /* now toggle between output=low and high-impedance */ - for (i = 0; i < 20; i++) { - writel(readl(GPDR(70)) | GPIO_bit(70), GPDR(70)); /* output */ - udelay(10); - writel(readl(GPDR(70)) & ~GPIO_bit(70), GPDR(70)); /* input */ - udelay(10); - } - - return 0; -} - - -/** - * misc_init_r: - misc initialisation routines - */ - -int misc_init_r(void) -{ - char *str; - - /* determine if the software update key is pressed during startup */ - if (readl(GPLR0) & 0x00000800) { - printf("using bootcmd_normal (sw-update button not pressed)\n"); - str = getenv("bootcmd_normal"); - } else { - printf("using bootcmd_update (sw-update button pressed)\n"); - str = getenv("bootcmd_update"); - } - - setenv("bootcmd",str); - - return 0; -} - - -/** - * board_init: - setup some data structures - * - * @return: 0 in case of success - */ - -int board_init (void) -{ - /* We have RAM, disable cache */ - dcache_disable(); - icache_disable(); - - gd->bd->bi_arch_number = MACH_TYPE_INNOKOM; - gd->bd->bi_boot_params = 0xa0000100; - gd->bd->bi_baudrate = CONFIG_BAUDRATE; - - return 0; -} - -extern void pxa_dram_init(void); -int dram_init(void) -{ - pxa_dram_init(); - gd->ram_size = PHYS_SDRAM_1_SIZE; - return 0; -} - -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -} - -/** - * innokom_set_led: - switch LEDs on or off - * - * @param led: LED to switch (0,1,2) - * @param state: switch on (1) or off (0) - */ - -void innokom_set_led(int led, int state) -{ - switch(led) { -/* - case 0: if (state==1) { - GPCR0 |= CSB226_USER_LED0; - } else if (state==0) { - GPSR0 |= CSB226_USER_LED0; - } - break; - - case 1: if (state==1) { - GPCR0 |= CSB226_USER_LED1; - } else if (state==0) { - GPSR0 |= CSB226_USER_LED1; - } - break; - - case 2: if (state==1) { - GPCR0 |= CSB226_USER_LED2; - } else if (state==0) { - GPSR0 |= CSB226_USER_LED2; - } - break; -*/ - } - - return; -} - - -/** - * show_boot_progress: - indicate state of the boot process - * - * @param status: Status number - see README for details. - * - * The CSB226 does only have 3 LEDs, so we switch them on at the most - * important states (1, 5, 15). - */ - -void show_boot_progress (int status) -{ - switch(status) { -/* - case 1: csb226_set_led(0,1); break; - case 5: csb226_set_led(1,1); break; - case 15: csb226_set_led(2,1); break; -*/ - } - - return; -} - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_SMC91111 - rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); -#endif - return rc; -} -#endif diff --git a/boards.cfg b/boards.cfg index 8bd91c5..a523c95 100644 --- a/boards.cfg +++ b/boards.cfg @@ -209,8 +209,6 @@ balloon3 arm pxa cerf250 arm pxa colibri_pxa270 arm pxa cradle arm pxa -csb226 arm pxa -innokom arm pxa lubbock arm pxa palmld arm pxa palmtc arm pxa diff --git a/include/configs/csb226.h b/include/configs/csb226.h deleted file mode 100644 index 804469b..0000000 --- a/include/configs/csb226.h +++ /dev/null @@ -1,506 +0,0 @@ -/* - * (C) Copyright 2000, 2001, 2002 - * Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de. - * - * Configuration for the Cogent CSB226 board. For details see - * http://www.cogcomp.com/csb_csb226.htm - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * include/configs/csb226.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define DEBUG 1 - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_PXA250 1 /* This is an PXA250 CPU */ -#define CONFIG_CSB226 1 /* on a CSB226 board */ - -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - /* for timer/console/ethernet */ - -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_DCACHE_OFF -#define CONFIG_SYS_TEXT_BASE 0x0 -/* - * Hardware drivers - */ - -/* - * select serial console configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_FFUART 1 /* we use FFUART on CSB226 */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 19200 -#undef CONFIG_MISC_INIT_R /* not used yet */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_BDI -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_IMI -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_NET -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_RUN -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_CACHE - - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTARGS "console=ttyS0,19200 ip=192.168.1.10,192.168.1.5,,255,255,255,0,csb root=/dev/nfs, ether=0,0x08000000,eth0" -#define CONFIG_ETHADDR FF:FF:FF:FF:FF:FF -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.1.56 -#define CONFIG_SERVERIP 192.168.1.5 -#define CONFIG_BOOTCOMMAND "bootm 0x40000" -#define CONFIG_SHOW_BOOT_PROGRESS - -#define CONFIG_CMDLINE_TAG 1 - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 19200 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ - -/* - * Size of malloc() pool; this lives below the uppermost 128 KiB which are - * used for the RAM copy of the uboot code - * - */ -#define CONFIG_SYS_MALLOC_LEN (128*1024) - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "uboot> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 128 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0xa3000000 /* default load address */ - /* RS: where is this documented? */ - /* RS: is this where U-Boot is */ - /* RS: relocated to in RAM? */ - -#define CONFIG_SYS_HZ 1000 - /* RS: the oscillator is actually 3680130?? */ -#define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */ - /* 0101000001 */ - /* ^^^^^ Memory Speed 99.53 MHz */ - /* ^^ Run Mode Speed = 2x Mem Speed */ - /* ^^ Turbo Mode Sp. = 1x Run M. Sp. */ - -#define CONFIG_SYS_MONITOR_LEN 0x1c000 /* 112 KiB */ - - /* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/* - * Network chip - */ -#define CONFIG_CS8900 -#define CONFIG_CS8900_BUS32 -#define CONFIG_CS8900_BASE 0x08000000 - -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */ - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* RAM starts here */ -#define CONFIG_SYS_DRAM_SIZE 0x02000000 - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) - -# if 0 -/* FIXME: switch to _documented_ registers */ -/* - * GPIO settings - * - * GP15 == nCS1 is 1 - * GP24 == SFRM is 1 - * GP25 == TXD is 1 - * GP33 == nCS5 is 1 - * GP39 == FFTXD is 1 - * GP41 == RTS is 1 - * GP47 == TXD is 1 - * GP49 == nPWE is 1 - * GP62 == LED_B is 1 - * GP63 == TDM_OE is 1 - * GP78 == nCS2 is 1 - * GP79 == nCS3 is 1 - * GP80 == nCS4 is 1 - */ -#define CONFIG_SYS_GPSR0_VAL 0x03008000 -#define CONFIG_SYS_GPSR1_VAL 0xC0028282 -#define CONFIG_SYS_GPSR2_VAL 0x0001C000 - -/* GP02 == DON_RST is 0 - * GP23 == SCLK is 0 - * GP45 == USB_ACT is 0 - * GP60 == PLLEN is 0 - * GP61 == LED_A is 0 - * GP73 == SWUPD_LED is 0 - */ -#define CONFIG_SYS_GPCR0_VAL 0x00800004 -#define CONFIG_SYS_GPCR1_VAL 0x30002000 -#define CONFIG_SYS_GPCR2_VAL 0x00000100 - -/* GP00 == DON_READY is input - * GP01 == DON_OK is input - * GP02 == DON_RST is output - * GP03 == RESET_IND is input - * GP07 == RES11 is input - * GP09 == RES12 is input - * GP11 == SWUPDATE is input - * GP14 == nPOWEROK is input - * GP15 == nCS1 is output - * GP17 == RES22 is input - * GP18 == RDY is input - * GP23 == SCLK is output - * GP24 == SFRM is output - * GP25 == TXD is output - * GP26 == RXD is input - * GP32 == RES21 is input - * GP33 == nCS5 is output - * GP34 == FFRXD is input - * GP35 == CTS is input - * GP39 == FFTXD is output - * GP41 == RTS is output - * GP42 == USB_OK is input - * GP45 == USB_ACT is output - * GP46 == RXD is input - * GP47 == TXD is output - * GP49 == nPWE is output - * GP58 == nCPUBUSINT is input - * GP59 == LANINT is input - * GP60 == PLLEN is output - * GP61 == LED_A is output - * GP62 == LED_B is output - * GP63 == TDM_OE is output - * GP64 == nDSPINT is input - * GP65 == STRAP0 is input - * GP67 == STRAP1 is input - * GP69 == STRAP2 is input - * GP70 == STRAP3 is input - * GP71 == STRAP4 is input - * GP73 == SWUPD_LED is output - * GP78 == nCS2 is output - * GP79 == nCS3 is output - * GP80 == nCS4 is output - */ -#define CONFIG_SYS_GPDR0_VAL 0x03808004 -#define CONFIG_SYS_GPDR1_VAL 0xF002A282 -#define CONFIG_SYS_GPDR2_VAL 0x0001C200 - -/* GP15 == nCS1 is AF10 - * GP18 == RDY is AF01 - * GP23 == SCLK is AF10 - * GP24 == SFRM is AF10 - * GP25 == TXD is AF10 - * GP26 == RXD is AF01 - * GP33 == nCS5 is AF10 - * GP34 == FFRXD is AF01 - * GP35 == CTS is AF01 - * GP39 == FFTXD is AF10 - * GP41 == RTS is AF10 - * GP46 == RXD is AF10 - * GP47 == TXD is AF01 - * GP49 == nPWE is AF10 - * GP78 == nCS2 is AF10 - * GP79 == nCS3 is AF10 - * GP80 == nCS4 is AF10 - */ -#define CONFIG_SYS_GAFR0_L_VAL 0x80000000 -#define CONFIG_SYS_GAFR0_U_VAL 0x001A8010 -#define CONFIG_SYS_GAFR1_L_VAL 0x60088058 -#define CONFIG_SYS_GAFR1_U_VAL 0x00000008 -#define CONFIG_SYS_GAFR2_L_VAL 0xA0000000 -#define CONFIG_SYS_GAFR2_U_VAL 0x00000002 - - -/* FIXME: set GPIO_RER/FER */ - -/* RDH = 1 - * PH = 1 - * VFS = 1 - * BFS = 1 - * SSS = 1 - */ -#define CONFIG_SYS_PSSR_VAL 0x37 - -/* - * Memory settings - * - * This is the configuration for nCS0/1 -> flash banks - * configuration for nCS1: - * [31] 0 - Slower Device - * [30:28] 010 - CS deselect to CS time: 2*(2*MemClk) = 40 ns - * [27:24] 0101 - Address to data valid in bursts: (5+1)*MemClk = 60 ns - * [23:20] 1011 - " for first access: (11+2)*MemClk = 130 ns - * [19] 1 - 16 Bit bus width - * [18:16] 000 - nonburst RAM or FLASH - * configuration for nCS0: - * [15] 0 - Slower Device - * [14:12] 010 - CS deselect to CS time: 2*(2*MemClk) = 40 ns - * [11:08] 0101 - Address to data valid in bursts: (5+1)*MemClk = 60 ns - * [07:04] 1011 - " for first access: (11+2)*MemClk = 130 ns - * [03] 1 - 16 Bit bus width - * [02:00] 000 - nonburst RAM or FLASH - */ -#define CONFIG_SYS_MSC0_VAL 0x25b825b8 /* flash banks */ - -/* This is the configuration for nCS2/3 -> TDM-Switch, DSP - * configuration for nCS3: DSP - * [31] 0 - Slower Device - * [30:28] 001 - RRR3: CS deselect to CS time: 1*(2*MemClk) = 20 ns - * [27:24] 0010 - RDN3: Address to data valid in bursts: (2+1)*MemClk = 30 ns - * [23:20] 0011 - RDF3: Address for first access: (3+1)*MemClk = 40 ns - * [19] 1 - 16 Bit bus width - * [18:16] 100 - variable latency I/O - * configuration for nCS2: TDM-Switch - * [15] 0 - Slower Device - * [14:12] 101 - RRR2: CS deselect to CS time: 5*(2*MemClk) = 100 ns - * [11:08] 1001 - RDN2: Address to data valid in bursts: (9+1)*MemClk = 100 ns - * [07:04] 0011 - RDF2: Address for first access: (3+1)*MemClk = 40 ns - * [03] 1 - 16 Bit bus width - * [02:00] 100 - variable latency I/O - */ -#define CONFIG_SYS_MSC1_VAL 0x123C593C /* TDM switch, DSP */ - -/* This is the configuration for nCS4/5 -> ExtBus, LAN Controller - * - * configuration for nCS5: LAN Controller - * [31] 0 - Slower Device - * [30:28] 001 - RRR5: CS deselect to CS time: 1*(2*MemClk) = 20 ns - * [27:24] 0010 - RDN5: Address to data valid in bursts: (2+1)*MemClk = 30 ns - * [23:20] 0011 - RDF5: Address for first access: (3+1)*MemClk = 40 ns - * [19] 1 - 16 Bit bus width - * [18:16] 100 - variable latency I/O - * configuration for nCS4: ExtBus - * [15] 0 - Slower Device - * [14:12] 110 - RRR4: CS deselect to CS time: 6*(2*MemClk) = 120 ns - * [11:08] 1100 - RDN4: Address to data valid in bursts: (12+1)*MemClk = 130 ns - * [07:04] 1101 - RDF4: Address for first access: 13->(15+1)*MemClk = 160 ns - * [03] 1 - 16 Bit bus width - * [02:00] 100 - variable latency I/O - */ -#define CONFIG_SYS_MSC2_VAL 0x123C6CDC /* extra bus, LAN controller */ - -/* MDCNFG: SDRAM Configuration Register - * - * [31:29] 000 - reserved - * [28] 0 - no SA1111 compatiblity mode - * [27] 0 - latch return data with return clock - * [26] 0 - alternate addressing for pair 2/3 - * [25:24] 00 - timings - * [23] 0 - internal banks in lower partition 2/3 (not used) - * [22:21] 00 - row address bits for partition 2/3 (not used) - * [20:19] 00 - column address bits for partition 2/3 (not used) - * [18] 0 - SDRAM partition 2/3 width is 32 bit - * [17] 0 - SDRAM partition 3 disabled - * [16] 0 - SDRAM partition 2 disabled - * [15:13] 000 - reserved - * [12] 1 - SA1111 compatiblity mode - * [11] 1 - latch return data with return clock - * [10] 0 - no alternate addressing for pair 0/1 - * [09:08] 01 - tRP=2*MemClk CL=2 tRCD=2*MemClk tRAS=5*MemClk tRC=8*MemClk - * [7] 1 - 4 internal banks in lower partition pair - * [06:05] 10 - 13 row address bits for partition 0/1 - * [04:03] 01 - 9 column address bits for partition 0/1 - * [02] 0 - SDRAM partition 0/1 width is 32 bit - * [01] 0 - disable SDRAM partition 1 - * [00] 1 - enable SDRAM partition 0 - */ -/* use the configuration above but disable partition 0 */ -#define CONFIG_SYS_MDCNFG_VAL 0x000019c8 - -/* MDREFR: SDRAM Refresh Control Register - * - * [32:26] 0 - reserved - * [25] 0 - K2FREE: not free running - * [24] 0 - K1FREE: not free running - * [23] 1 - K0FREE: not free running - * [22] 0 - SLFRSH: self refresh disabled - * [21] 0 - reserved - * [20] 0 - APD: no auto power down - * [19] 0 - K2DB2: SDCLK2 is MemClk - * [18] 0 - K2RUN: disable SDCLK2 - * [17] 0 - K1DB2: SDCLK1 is MemClk - * [16] 1 - K1RUN: enable SDCLK1 - * [15] 1 - E1PIN: SDRAM clock enable - * [14] 1 - K0DB2: SDCLK0 is MemClk - * [13] 0 - K0RUN: disable SDCLK0 - * [12] 1 - E0PIN: disable SDCKE0 - * [11:00] 000000011000 - (64ms/8192)*MemClkFreq/32 = 24 - */ -#define CONFIG_SYS_MDREFR_VAL 0x0081D018 - -/* MDMRS: Mode Register Set Configuration Register - * - * [31] 0 - reserved - * [30:23] 00000000- MDMRS2: SDRAM2/3 MRS Value. (not used) - * [22:20] 000 - MDCL2: SDRAM2/3 Cas Latency. (not used) - * [19] 0 - MDADD2: SDRAM2/3 burst Type. Fixed to sequential. (not used) - * [18:16] 010 - MDBL2: SDRAM2/3 burst Length. Fixed to 4. (not used) - * [15] 0 - reserved - * [14:07] 00000000- MDMRS0: SDRAM0/1 MRS Value. - * [06:04] 010 - MDCL0: SDRAM0/1 Cas Latency. - * [03] 0 - MDADD0: SDRAM0/1 burst Type. Fixed to sequential. - * [02:00] 010 - MDBL0: SDRAM0/1 burst Length. Fixed to 4. - */ -#define CONFIG_SYS_MDMRS_VAL 0x00020022 - -/* - * PCMCIA and CF Interfaces - */ -#define CONFIG_SYS_MECR_VAL 0x00000000 -#define CONFIG_SYS_MCMEM0_VAL 0x00000000 -#define CONFIG_SYS_MCMEM1_VAL 0x00000000 -#define CONFIG_SYS_MCATT0_VAL 0x00000000 -#define CONFIG_SYS_MCATT1_VAL 0x00000000 -#define CONFIG_SYS_MCIO0_VAL 0x00000000 -#define CONFIG_SYS_MCIO1_VAL 0x00000000 -#endif - -/* - * GPIO settings - */ -#define CONFIG_SYS_GPSR0_VAL 0xFFFFFFFF -#define CONFIG_SYS_GPSR1_VAL 0xFFFFFFFF -#define CONFIG_SYS_GPSR2_VAL 0xFFFFFFFF -#define CONFIG_SYS_GPCR0_VAL 0x08022080 -#define CONFIG_SYS_GPCR1_VAL 0x00000000 -#define CONFIG_SYS_GPCR2_VAL 0x00000000 -#define CONFIG_SYS_GPDR0_VAL 0xCD82A878 -#define CONFIG_SYS_GPDR1_VAL 0xFCFFAB80 -#define CONFIG_SYS_GPDR2_VAL 0x0001FFFF -#define CONFIG_SYS_GAFR0_L_VAL 0x80000000 -#define CONFIG_SYS_GAFR0_U_VAL 0xA5254010 -#define CONFIG_SYS_GAFR1_L_VAL 0x599A9550 -#define CONFIG_SYS_GAFR1_U_VAL 0xAAA5AAAA -#define CONFIG_SYS_GAFR2_L_VAL 0xAAAAAAAA -#define CONFIG_SYS_GAFR2_U_VAL 0x00000002 - -/* FIXME: set GPIO_RER/FER */ - -#define CONFIG_SYS_PSSR_VAL 0x20 - -#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10 -#define CONFIG_SYS_CKEN 0x0 - -/* - * Memory settings - */ - -#define CONFIG_SYS_MSC0_VAL 0x2ef15af0 -#define CONFIG_SYS_MSC1_VAL 0x00003ff4 -#define CONFIG_SYS_MSC2_VAL 0x7ff07ff0 -#define CONFIG_SYS_MDCNFG_VAL 0x09a909a9 -#define CONFIG_SYS_MDREFR_VAL 0x038ff030 -#define CONFIG_SYS_MDMRS_VAL 0x00220022 -#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 -#define CONFIG_SYS_SXCNFG_VAL 0x00000000 - -/* - * PCMCIA and CF Interfaces - */ -#define CONFIG_SYS_MECR_VAL 0x00000000 -#define CONFIG_SYS_MCMEM0_VAL 0x00000000 -#define CONFIG_SYS_MCMEM1_VAL 0x00000000 -#define CONFIG_SYS_MCATT0_VAL 0x00000000 -#define CONFIG_SYS_MCATT1_VAL 0x00000000 -#define CONFIG_SYS_MCIO0_VAL 0x00000000 -#define CONFIG_SYS_MCIO1_VAL 0x00000000 - -#define CSB226_USER_LED0 0x00000008 -#define CSB226_USER_LED1 0x00000010 -#define CSB226_USER_LED2 0x00000020 - - -/* - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sect. on one chip */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x1C000) - /* Addr of Environment Sector */ -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/innokom.h b/include/configs/innokom.h deleted file mode 100644 index a0a3da1..0000000 --- a/include/configs/innokom.h +++ /dev/null @@ -1,507 +0,0 @@ -/* - * (C) Copyright 2000, 2001, 2002 - * Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de. - * - * Configuration for the Auerswald Innokom CPU board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * include/configs/innokom.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_PXA250 1 /* This is an PXA250 CPU */ -#define CONFIG_INNOKOM 1 /* on an Auerswald Innokom board */ - -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - /* for timer/console/ethernet */ - -#define CONFIG_SYS_TEXT_BASE 0x0 - -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_DCACHE_OFF - -/* - * Hardware drivers - */ - -/* - * select serial console configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_FFUART 1 /* we use FFUART on CSB226 */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 19200 -#define CONFIG_MISC_INIT_R 1 /* we have a misc_init_r() function */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_BDI -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IMI -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_NET -#define CONFIG_CMD_RUN - - -#define CONFIG_BOOTDELAY 3 -/* #define CONFIG_BOOTARGS "root=/dev/nfs ip=bootp console=ttyS0,19200" */ -#define CONFIG_BOOTARGS "console=ttyS0,19200" -#define CONFIG_ETHADDR FF:FF:FF:FF:FF:FF -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.1.56 -#define CONFIG_SERVERIP 192.168.1.2 -#define CONFIG_BOOTCOMMAND "bootm 0x40000" -#define CONFIG_SHOW_BOOT_PROGRESS - -#define CONFIG_CMDLINE_TAG 1 - -/* - * Miscellaneous configurable options - */ - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (256*1024) - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "uboot> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0xa3000000 /* load kernel to this address */ - -#define CONFIG_SYS_HZ 1000 - /* RS: the oscillator is actually 3680130?? */ - -#define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */ - /* 0101000001 */ - /* ^^^^^ Memory Speed 99.53 MHz */ - /* ^^ Run Mode Speed = 2x Mem Speed */ - /* ^^ Turbo Mode Sp. = 1x Run M. Sp. */ - -#define CONFIG_SYS_MONITOR_LEN 0x20000 /* 128 KiB */ - - /* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/* - * I2C bus - */ -#define CONFIG_I2C_MV 1 -#define CONFIG_MV_I2C_REG 0x40301680 -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0xfe - -#define CONFIG_ENV_IS_IN_EEPROM 1 - -#define CONFIG_ENV_OFFSET 0x00 /* environment starts here */ -#define CONFIG_ENV_SIZE 1024 /* 1 KiB */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* A0 = 0 (hardwired) */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* 5 bits = 32 octets */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 15 /* between stop and start */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* length of address */ -#define CONFIG_SYS_EEPROM_SIZE 4096 /* size in bytes */ -#define CONFIG_SYS_I2C_INIT_BOARD 1 /* board has it's own init */ - -/* - * SMSC91C111 Network Card - */ -#define CONFIG_SMC91111 1 -#define CONFIG_SMC91111_BASE 0x14000000 /* chip select 5 */ -#undef CONFIG_SMC_USE_32_BIT /* 16 bit bus access */ -#undef CONFIG_SMC_91111_EXT_PHY /* we use internal phy */ -#define CONFIG_SMC_AUTONEG_TIMEOUT 10 /* timeout 10 seconds */ -#undef CONFIG_SHOW_ACTIVITY -#define CONFIG_NET_RETRY_COUNT 10 /* # of retries */ - -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_SIZE 0x01000000 /* 16 MB */ - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* RAM starts here */ -#define CONFIG_SYS_DRAM_SIZE 0x04000000 - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) - -/* - * JFFS2 partitions - * - */ -/* development flash */ -#define CONFIG_MTD_INNOKOM_16MB 1 -#undef CONFIG_MTD_INNOKOM_64MB - -/* production flash */ -/* -#define CONFIG_MTD_INNOKOM_64MB 1 -#undef CONFIG_MTD_INNOKOM_16MB -*/ - -/* No command line, one static partition, whole device */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor0" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00000000 - -/* mtdparts command line support */ -/* Note: fake mtd_id used, no linux mtd map file */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "nor0=innokom-0" -*/ - -/* development flash */ -/* -#define MTDPARTS_DEFAULT "mtdparts=innokom-0:256k(uboot),768k(kernel),8m(user),7m(data)" -*/ - -/* production flash */ -/* -#define MTDPARTS_DEFAULT "mtdparts=innokom-0:256k(uboot),768k(kernel),16256k(user1),16256k(user2),32m(data)" -*/ - -/* - * GPIO settings - * - * GP15 == nCS1 is 1 - * GP24 == SFRM is 1 - * GP25 == TXD is 1 - * GP33 == nCS5 is 1 - * GP39 == FFTXD is 1 - * GP41 == RTS is 1 - * GP47 == TXD is 1 - * GP49 == nPWE is 1 - * GP62 == LED_B is 1 - * GP63 == TDM_OE is 1 - * GP78 == nCS2 is 1 - * GP79 == nCS3 is 1 - * GP80 == nCS4 is 1 - */ -#define CONFIG_SYS_GPSR0_VAL 0x03008000 -#define CONFIG_SYS_GPSR1_VAL 0xC0028282 -#define CONFIG_SYS_GPSR2_VAL 0x0001C000 - -/* GP02 == DON_RST is 0 - * GP23 == SCLK is 0 - * GP45 == USB_ACT is 0 - * GP60 == PLLEN is 0 - * GP61 == LED_A is 0 - * GP73 == SWUPD_LED is 0 - */ -#define CONFIG_SYS_GPCR0_VAL 0x00800004 -#define CONFIG_SYS_GPCR1_VAL 0x30002000 -#define CONFIG_SYS_GPCR2_VAL 0x00000100 - -/* GP00 == DON_READY is input - * GP01 == DON_OK is input - * GP02 == DON_RST is output - * GP03 == RESET_IND is input - * GP07 == RES11 is input - * GP09 == RES12 is input - * GP11 == SWUPDATE is input - * GP14 == nPOWEROK is input - * GP15 == nCS1 is output - * GP17 == RES22 is input - * GP18 == RDY is input - * GP23 == SCLK is output - * GP24 == SFRM is output - * GP25 == TXD is output - * GP26 == RXD is input - * GP32 == RES21 is input - * GP33 == nCS5 is output - * GP34 == FFRXD is input - * GP35 == CTS is input - * GP39 == FFTXD is output - * GP41 == RTS is output - * GP42 == USB_OK is input - * GP45 == USB_ACT is output - * GP46 == RXD is input - * GP47 == TXD is output - * GP49 == nPWE is output - * GP58 == nCPUBUSINT is input - * GP59 == LANINT is input - * GP60 == PLLEN is output - * GP61 == LED_A is output - * GP62 == LED_B is output - * GP63 == TDM_OE is output - * GP64 == nDSPINT is input - * GP65 == STRAP0 is input - * GP67 == STRAP1 is input - * GP69 == STRAP2 is input - * GP70 == STRAP3 is input - * GP71 == STRAP4 is input - * GP73 == SWUPD_LED is output - * GP78 == nCS2 is output - * GP79 == nCS3 is output - * GP80 == nCS4 is output - */ -#define CONFIG_SYS_GPDR0_VAL 0x03808004 -#define CONFIG_SYS_GPDR1_VAL 0xF002A282 -#define CONFIG_SYS_GPDR2_VAL 0x0001C200 - -/* GP15 == nCS1 is AF10 - * GP18 == RDY is AF01 - * GP23 == SCLK is AF10 - * GP24 == SFRM is AF10 - * GP25 == TXD is AF10 - * GP26 == RXD is AF01 - * GP33 == nCS5 is AF10 - * GP34 == FFRXD is AF01 - * GP35 == CTS is AF01 - * GP39 == FFTXD is AF10 - * GP41 == RTS is AF10 - * GP46 == RXD is AF10 - * GP47 == TXD is AF01 - * GP49 == nPWE is AF10 - * GP78 == nCS2 is AF10 - * GP79 == nCS3 is AF10 - * GP80 == nCS4 is AF10 - */ -#define CONFIG_SYS_GAFR0_L_VAL 0x80000000 -#define CONFIG_SYS_GAFR0_U_VAL 0x001A8010 -#define CONFIG_SYS_GAFR1_L_VAL 0x60088058 -#define CONFIG_SYS_GAFR1_U_VAL 0x00000008 -#define CONFIG_SYS_GAFR2_L_VAL 0xA0000000 -#define CONFIG_SYS_GAFR2_U_VAL 0x00000002 - - -/* FIXME: set GPIO_RER/FER */ - -/* RDH = 1 - * PH = 1 - * VFS = 1 - * BFS = 1 - * SSS = 1 - */ -#define CONFIG_SYS_PSSR_VAL 0x37 - -#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10 -#define CONFIG_SYS_CKEN 0x0 - -/* - * Memory settings - * - * This is the configuration for nCS0/1 -> flash banks - * configuration for nCS1: - * [31] 0 - Slower Device - * [30:28] 010 - CS deselect to CS time: 2*(2*MemClk) = 40 ns - * [27:24] 0101 - Address to data valid in bursts: (5+1)*MemClk = 60 ns - * [23:20] 1011 - " for first access: (11+2)*MemClk = 130 ns - * [19] 1 - 16 Bit bus width - * [18:16] 000 - nonburst RAM or FLASH - * configuration for nCS0: - * [15] 0 - Slower Device - * [14:12] 010 - CS deselect to CS time: 2*(2*MemClk) = 40 ns - * [11:08] 0101 - Address to data valid in bursts: (5+1)*MemClk = 60 ns - * [07:04] 1011 - " for first access: (11+2)*MemClk = 130 ns - * [03] 1 - 16 Bit bus width - * [02:00] 000 - nonburst RAM or FLASH - */ -#define CONFIG_SYS_MSC0_VAL 0x25b825b8 /* flash banks */ - -/* This is the configuration for nCS2/3 -> TDM-Switch, DSP - * configuration for nCS3: DSP - * [31] 0 - Slower Device - * [30:28] 001 - RRR3: CS deselect to CS time: 1*(2*MemClk) = 20 ns - * [27:24] 0010 - RDN3: Address to data valid in bursts: (2+1)*MemClk = 30 ns - * [23:20] 0011 - RDF3: Address for first access: (3+1)*MemClk = 40 ns - * [19] 1 - 16 Bit bus width - * [18:16] 100 - variable latency I/O - * configuration for nCS2: TDM-Switch - * [15] 0 - Slower Device - * [14:12] 101 - RRR2: CS deselect to CS time: 5*(2*MemClk) = 100 ns - * [11:08] 1001 - RDN2: Address to data valid in bursts: (9+1)*MemClk = 100 ns - * [07:04] 0011 - RDF2: Address for first access: (3+1)*MemClk = 40 ns - * [03] 1 - 16 Bit bus width - * [02:00] 100 - variable latency I/O - */ -#define CONFIG_SYS_MSC1_VAL 0x123C593C /* TDM switch, DSP */ - -/* This is the configuration for nCS4/5 -> ExtBus, LAN Controller - * - * configuration for nCS5: LAN Controller - * [31] 0 - Slower Device - * [30:28] 001 - RRR5: CS deselect to CS time: 1*(2*MemClk) = 20 ns - * [27:24] 0010 - RDN5: Address to data valid in bursts: (2+1)*MemClk = 30 ns - * [23:20] 0011 - RDF5: Address for first access: (3+1)*MemClk = 40 ns - * [19] 1 - 16 Bit bus width - * [18:16] 100 - variable latency I/O - * configuration for nCS4: ExtBus - * [15] 0 - Slower Device - * [14:12] 110 - RRR4: CS deselect to CS time: 6*(2*MemClk) = 120 ns - * [11:08] 1100 - RDN4: Address to data valid in bursts: (12+1)*MemClk = 130 ns - * [07:04] 1101 - RDF4: Address for first access: 13->(15+1)*MemClk = 160 ns - * [03] 1 - 16 Bit bus width - * [02:00] 100 - variable latency I/O - */ -#define CONFIG_SYS_MSC2_VAL 0x123C6CDC /* extra bus, LAN controller */ - -/* MDCNFG: SDRAM Configuration Register - * - * [31:29] 000 - reserved - * [28] 0 - no SA1111 compatiblity mode - * [27] 0 - latch return data with return clock - * [26] 0 - alternate addressing for pair 2/3 - * [25:24] 00 - timings - * [23] 0 - internal banks in lower partition 2/3 (not used) - * [22:21] 00 - row address bits for partition 2/3 (not used) - * [20:19] 00 - column address bits for partition 2/3 (not used) - * [18] 0 - SDRAM partition 2/3 width is 32 bit - * [17] 0 - SDRAM partition 3 disabled - * [16] 0 - SDRAM partition 2 disabled - * [15:13] 000 - reserved - * [12] 1 - SA1111 compatiblity mode - * [11] 1 - latch return data with return clock - * [10] 0 - no alternate addressing for pair 0/1 - * [09:08] 01 - tRP=2*MemClk CL=2 tRCD=2*MemClk tRAS=5*MemClk tRC=8*MemClk - * [7] 1 - 4 internal banks in lower partition pair - * [06:05] 10 - 13 row address bits for partition 0/1 - * [04:03] 01 - 9 column address bits for partition 0/1 - * [02] 0 - SDRAM partition 0/1 width is 32 bit - * [01] 0 - disable SDRAM partition 1 - * [00] 1 - enable SDRAM partition 0 - */ -/* use the configuration above but disable partition 0 */ -#define CONFIG_SYS_MDCNFG_VAL 0x000019c8 - -/* MDREFR: SDRAM Refresh Control Register - * - * [32:26] 0 - reserved - * [25] 0 - K2FREE: not free running - * [24] 0 - K1FREE: not free running - * [23] 1 - K0FREE: not free running - * [22] 0 - SLFRSH: self refresh disabled - * [21] 0 - reserved - * [20] 0 - APD: no auto power down - * [19] 0 - K2DB2: SDCLK2 is MemClk - * [18] 0 - K2RUN: disable SDCLK2 - * [17] 0 - K1DB2: SDCLK1 is MemClk - * [16] 1 - K1RUN: enable SDCLK1 - * [15] 1 - E1PIN: SDRAM clock enable - * [14] 1 - K0DB2: SDCLK0 is MemClk - * [13] 0 - K0RUN: disable SDCLK0 - * [12] 1 - E0PIN: disable SDCKE0 - * [11:00] 000000011000 - (64ms/8192)*MemClkFreq/32 = 24 - */ -#define CONFIG_SYS_MDREFR_VAL 0x0081D018 - -/* MDMRS: Mode Register Set Configuration Register - * - * [31] 0 - reserved - * [30:23] 00000000- MDMRS2: SDRAM2/3 MRS Value. (not used) - * [22:20] 000 - MDCL2: SDRAM2/3 Cas Latency. (not used) - * [19] 0 - MDADD2: SDRAM2/3 burst Type. Fixed to sequential. (not used) - * [18:16] 010 - MDBL2: SDRAM2/3 burst Length. Fixed to 4. (not used) - * [15] 0 - reserved - * [14:07] 00000000- MDMRS0: SDRAM0/1 MRS Value. - * [06:04] 010 - MDCL0: SDRAM0/1 Cas Latency. - * [03] 0 - MDADD0: SDRAM0/1 burst Type. Fixed to sequential. - * [02:00] 010 - MDBL0: SDRAM0/1 burst Length. Fixed to 4. - */ -#define CONFIG_SYS_MDMRS_VAL 0x00020022 - -/* - * PCMCIA and CF Interfaces - */ -#define CONFIG_SYS_MECR_VAL 0x00000000 -#define CONFIG_SYS_MCMEM0_VAL 0x00000000 -#define CONFIG_SYS_MCMEM1_VAL 0x00000000 -#define CONFIG_SYS_MCATT0_VAL 0x00000000 -#define CONFIG_SYS_MCATT1_VAL 0x00000000 -#define CONFIG_SYS_MCIO0_VAL 0x00000000 -#define CONFIG_SYS_MCIO1_VAL 0x00000000 - -#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 -#define CONFIG_SYS_SXCNFG_VAL 0x00000000 - -/* -#define CSB226_USER_LED0 0x00000008 -#define CSB226_USER_LED1 0x00000010 -#define CSB226_USER_LED2 0x00000020 -*/ - -/* - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sect. on one chip */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#endif /* __CONFIG_H */