
Hi Jonas,
On 2023/3/14 08:38, Jonas Karlman wrote:
Running U-Boot on a ROCK 3 Model A result in the following:
No serial driver found resetting ... no sysreset ### ERROR ### Please RESET the board ###
Replace bootph- props with u-boot,dm- props to fix this.
Signed-off-by: Jonas Karlman jonas@kwiboo.se
Sorry, my mistake, I though the patch series [0] has been apply to master, but it's in next for now.
We may need another fix after next merge to master next month.
I will apply this frist for this release.
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Thanks, - Kever
[0] https://patchwork.ozlabs.org/project/uboot/cover/20230213155641.1208774-1-sj...
arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi | 2 +- arch/arm/dts/rk3566-radxa-cm3-io-u-boot.dtsi | 2 +- arch/arm/dts/rk3568-rock-3a-u-boot.dtsi | 2 +- arch/arm/dts/rk3588-edgeble-neu6a-io-u-boot.dtsi | 2 +- arch/arm/dts/rk3588s-u-boot.dtsi | 14 +++++++------- 5 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi b/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi index a27a3adc082b..27735c49ddc0 100644 --- a/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi +++ b/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi @@ -11,7 +11,7 @@ };
&uart0 {
- bootph-all;
- u-boot,dm-pre-reloc; clock-frequency = <24000000>; status = "okay"; };
diff --git a/arch/arm/dts/rk3566-radxa-cm3-io-u-boot.dtsi b/arch/arm/dts/rk3566-radxa-cm3-io-u-boot.dtsi index 4e791738335f..589332503e72 100644 --- a/arch/arm/dts/rk3566-radxa-cm3-io-u-boot.dtsi +++ b/arch/arm/dts/rk3566-radxa-cm3-io-u-boot.dtsi @@ -13,6 +13,6 @@
&uart2 { clock-frequency = <24000000>;
- bootph-all;
- u-boot,dm-pre-reloc; status = "okay"; };
diff --git a/arch/arm/dts/rk3568-rock-3a-u-boot.dtsi b/arch/arm/dts/rk3568-rock-3a-u-boot.dtsi index ed47efa44bf9..b5ca23a82a20 100644 --- a/arch/arm/dts/rk3568-rock-3a-u-boot.dtsi +++ b/arch/arm/dts/rk3568-rock-3a-u-boot.dtsi @@ -19,6 +19,6 @@
&uart2 { clock-frequency = <24000000>;
- bootph-all;
- u-boot,dm-pre-reloc; status = "okay"; };
diff --git a/arch/arm/dts/rk3588-edgeble-neu6a-io-u-boot.dtsi b/arch/arm/dts/rk3588-edgeble-neu6a-io-u-boot.dtsi index 3235bd36e4c8..612966492b02 100644 --- a/arch/arm/dts/rk3588-edgeble-neu6a-io-u-boot.dtsi +++ b/arch/arm/dts/rk3588-edgeble-neu6a-io-u-boot.dtsi @@ -18,7 +18,7 @@
&sdmmc { bus-width = <4>;
- bootph-all;
- u-boot,dm-pre-reloc; u-boot,spl-fifo-mode; status = "okay"; };
diff --git a/arch/arm/dts/rk3588s-u-boot.dtsi b/arch/arm/dts/rk3588s-u-boot.dtsi index 1e225d71efc2..f880f4a16741 100644 --- a/arch/arm/dts/rk3588s-u-boot.dtsi +++ b/arch/arm/dts/rk3588s-u-boot.dtsi @@ -8,12 +8,12 @@ / { dmc { compatible = "rockchip,rk3588-dmc";
bootph-all;
u-boot,dm-pre-reloc;
status = "okay"; };
pmu1_grf: syscon@fd58a000 {
bootph-all;
compatible = "rockchip,rk3588-pmu1-grf", "syscon"; reg = <0x0 0xfd58a000 0x0 0x2000>; };u-boot,dm-pre-reloc;
@@ -46,26 +46,26 @@ };
&xin24m {
- bootph-all;
u-boot,dm-pre-reloc; status = "okay"; };
&cru {
- bootph-pre-ram;
u-boot,dm-spl; status = "okay"; };
&sys_grf {
- bootph-pre-ram;
u-boot,dm-spl; status = "okay"; };
&uart2 { clock-frequency = <24000000>;
- bootph-pre-ram;
u-boot,dm-spl; status = "okay"; };
&ioc {
- bootph-pre-ram;
- u-boot,dm-spl; };