This allow user to know if the bootloader is running, even without a serial console.
Signed-off-by: Otavio Salvador otavio@ossystems.com.br --- Changes in v3: - Added the MUX settings back (requested by Fabio) - Added name of the PIN in the board config file
Changes in v2: - Remove MUX setting - not need
board/olimex/mx23_olinuxino/mx23_olinuxino.c | 7 +++++++ board/olimex/mx23_olinuxino/spl_boot.c | 4 ++++ include/configs/mx23_olinuxino.h | 12 ++++++++++++ 3 files changed, 23 insertions(+)
diff --git a/board/olimex/mx23_olinuxino/mx23_olinuxino.c b/board/olimex/mx23_olinuxino/mx23_olinuxino.c index 6a6053b..2501417 100644 --- a/board/olimex/mx23_olinuxino/mx23_olinuxino.c +++ b/board/olimex/mx23_olinuxino/mx23_olinuxino.c @@ -28,6 +28,9 @@ #include <asm/arch/imx-regs.h> #include <asm/arch/clock.h> #include <asm/arch/sys_proto.h> +#ifdef CONFIG_STATUS_LED +#include <status_led.h> +#endif
DECLARE_GLOBAL_DATA_PTR;
@@ -67,5 +70,9 @@ int board_init(void) /* Adress of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT) + status_led_set(STATUS_LED_BOOT, STATUS_LED_STATE); +#endif + return 0; } diff --git a/board/olimex/mx23_olinuxino/spl_boot.c b/board/olimex/mx23_olinuxino/spl_boot.c index 7def8bc..3bbf5ad 100644 --- a/board/olimex/mx23_olinuxino/spl_boot.c +++ b/board/olimex/mx23_olinuxino/spl_boot.c @@ -84,6 +84,10 @@ const iomux_cfg_t iomux_setup[] = { MX23_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI, MX23_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI,
+ /* Green LED */ + MX23_PAD_SSP1_DETECT__GPIO_2_1 | + (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL), + /* MMC 0 */ MX23_PAD_SSP1_CMD__SSP1_CMD | MUX_CONFIG_SSP, MX23_PAD_SSP1_DATA0__SSP1_DATA0 | MUX_CONFIG_SSP, diff --git a/include/configs/mx23_olinuxino.h b/include/configs/mx23_olinuxino.h index 7983c5d..ef8aaae 100644 --- a/include/configs/mx23_olinuxino.h +++ b/include/configs/mx23_olinuxino.h @@ -56,6 +56,7 @@ #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT #define CONFIG_CMD_GPIO +#define CONFIG_CMD_LED #define CONFIG_CMD_MMC
/* @@ -112,6 +113,17 @@ #define CONFIG_BAUDRATE 115200 /* Default baud rate */
/* + * Status LED + */ +#define CONFIG_STATUS_LED +#define CONFIG_GPIO_LED +#define CONFIG_BOARD_SPECIFIC_LED +#define STATUS_LED_BOOT 0 +#define STATUS_LED_BIT 0x030a /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */ +#define STATUS_LED_STATE STATUS_LED_ON +#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) + +/* * MMC Driver */ #ifdef CONFIG_CMD_MMC