Re: [U-Boot] [PATCH 2/5] board_r: run scsi init() on ARM too

3 Jun 2014

      Hi Ian,
On 31 May 2014 10:36, Ian Campbell ijc@hellion.org.uk wrote:
...
This has been disabled for ARM in initr_scsi since that function was
introduced. However it works fine for me on Cubieboard and Cubietruck (with the
upcoming AHCI glue patch).
I also tested on two random ARM platforms which seem to define CONFIG_CMD_SCSI:

highbank worked fine (on midway hardware)
omap5_uevm built OK and I confirmed using objdump that things were as
expected (i.e. the default weak scsi_init nop was used).

While there remove the mismatched comment from the #endif (omitting the comment
seems to be the prevailing style in this file) and add a missing return to
initr_doc which I happened to spot while editing.
Signed-off-by: Ian Campbell ijc@hellion.org.uk
Cc: Simon Glass sjg@chromium.org
I see no build breakage for ARM boards with this patch.
Acked-by: Simon Glass sjg@chromium.org
Regards,
Simon