Hi Gnanasekar,

 

The tool chain depends on what processor you are using. whether PowerPC or ARM. For thse toolchains you have to download GGC, GLIBC and cross compile them. You can also find pre compiled GCC and Lib but I would suggest that you try compiling your own tool chain. This shall give you a feel of how to build using GCC. how to use GNU tools etc.

 

Regarding how to build Uboot. it is very simple. you have read the readme file first and then follow.

 

if you have any problems I would be glad to help you out if I can :-)
 

Regards

Amit
 

On 2/21/07, gnanasekar.dasarathan@wipro.com <gnanasekar.dasarathan@wipro.com > wrote:

Hi,

 i'm very new to u-boot , i installed u-boot 1.1.6 but i don't know how to configure u-boot, i know that some tool chain shd be used, which tool chain shd be used and how/where to add tool chain to u-boot1.1.6 and how to make ? basically i'm so new, could u please provide me the detailed notes of how to compile?eagerly waiting for ur reply

regards,

Gnanasekar

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users