I did the changes of adding the clock values to gd, and it became somewhat better, but there are still issues pending:
- NAND accesses cause "raise: Signal # 8 caught"
but still work, kernel boots normally. 2. environment is still invalid - when I boot the "CONFIG_SYS_ARM_WITHOUT_RELOC" version the ENV is ok. 3. saveenv goes way to fast to do anything and i2c md 57 1000.2 100 shows no change 4. env default -f hangs the system
Q: after relocation, "gd->" values are still available, right?
I am searching for further "violations"...
Found them in timer.c, fixed them, now the NAND issue is gone.
The environment issues still persist. I am at a loss there now.
Observation: the old style commands "setenv", "printenv", etc. work, but any "env" command except for "env" alone crashes.
Hints where to look into are welcome, I will investige more later or tomorrow.
Reinhard