On 13 September 2017 at 13:29, Philipp Tomsich philipp.tomsich@theobroma-systems.com wrote:
With the ATF capable of accessing the FDT passed to the next stage, we can specify configuration items for the ATF in the /config path.
This adds the arm-trusted-firmware,reset-gpio that conveys the number of the GPIO used to reset the board (used, when a reboot is requested from ATF via PSCI).
Signed-off-by: Philipp Tomsich philipp.tomsich@theobroma-systems.com
arch/arm/dts/rk3399-puma.dtsi | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi index d33c710..70d551b 100644 --- a/arch/arm/dts/rk3399-puma.dtsi +++ b/arch/arm/dts/rk3399-puma.dtsi @@ -16,6 +16,7 @@ u-boot,mmc-env-offset = <0x4000>; /* @ 16KB */ u-boot,efi-partition-entries-offset = <0x200000>; /* 2MB */ u-boot,boot-led = "module_led";
arm-trusted-firmware,reset-gpio = <38>; }; chosen {-- 2.1.4
How about putting this in an atf {} subnode?
That reminds me that these things should be documented in doc/device-tree-bindings/config.txt