-----Original Message----- From: Gerlando Falauto [mailto:gerlando.falauto@keymile.com] Sent: 25 July 2012 09:26 To: u-boot@lists.denx.de Cc: Holger Brunck; Gerlando Falauto; Prafulla Wadaskar; Valentin Longchamp Subject: [PATCH v4 4/4] arm/km: use kw_sdram_size_adjust to adjust SDRAM size
From: Holger Brunck holger.brunck@keymile.com
Some boards may differ only in the SDRAM size. This function allows to fix the size accordingly and we can use the same u-boot binary for both boards.
Signed-off-by: Holger Brunck holger.brunck@keymile.com Signed-off-by: Gerlando Falauto gerlando.falauto@keymile.com cc: Prafulla Wadaskar prafulla@marvell.com cc: Valentin Longchamp valentin.longchamp@keymile.com
changes for v4:
- add bank parameter to kw_sdram_size_adjust()
changes for v3:
- new patch
board/keymile/km_arm/km_arm.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c index 2b2ca39..ac14a2f 100644 --- a/board/keymile/km_arm/km_arm.c +++ b/board/keymile/km_arm/km_arm.c @@ -250,7 +250,8 @@ int board_early_init_f(void) tmp = readl(KW_GPIO0_BASE + 4); writel(tmp & (~KM_KIRKWOOD_SOFT_I2C_GPIOS) , KW_GPIO0_BASE + 4); #endif
- /* adjust SDRAM size for bank 0 */
- kw_sdram_size_adjust(0); kirkwood_mpp_conf(kwmpp_config, NULL); return 0;
}
1.7.1
Applied to u-boot-marvell.git master branch
Regards... Prafulla . . .