On 14/08/2018 15:07, Beniamino Galvani wrote:
The reset is already handled by the designware driver using information from device tree.
Signed-off-by: Beniamino Galvani b.galvani@gmail.com
board/amlogic/nanopi-k2/nanopi-k2.c | 6 ------ board/amlogic/odroid-c2/odroid-c2.c | 6 ------ 2 files changed, 12 deletions(-)
diff --git a/board/amlogic/nanopi-k2/nanopi-k2.c b/board/amlogic/nanopi-k2/nanopi-k2.c index 339dbb81db..ae29dd6fa4 100644 --- a/board/amlogic/nanopi-k2/nanopi-k2.c +++ b/board/amlogic/nanopi-k2/nanopi-k2.c @@ -30,12 +30,6 @@ int misc_init_r(void)
meson_gx_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
- /* Reset PHY on GPIOZ_14 */
- clrbits_le32(GX_GPIO_EN(3), BIT(14));
- clrbits_le32(GX_GPIO_OUT(3), BIT(14));
- mdelay(10);
- setbits_le32(GX_GPIO_OUT(3), BIT(14));
- if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, mac_addr, EFUSE_MAC_SIZE);
diff --git a/board/amlogic/odroid-c2/odroid-c2.c b/board/amlogic/odroid-c2/odroid-c2.c index c47b9ce9cb..2a2755c387 100644 --- a/board/amlogic/odroid-c2/odroid-c2.c +++ b/board/amlogic/odroid-c2/odroid-c2.c @@ -30,12 +30,6 @@ int misc_init_r(void)
meson_gx_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
- /* Reset PHY on GPIOZ_14 */
- clrbits_le32(GX_GPIO_EN(3), BIT(14));
- clrbits_le32(GX_GPIO_OUT(3), BIT(14));
- mdelay(10);
- setbits_le32(GX_GPIO_OUT(3), BIT(14));
- if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, mac_addr, EFUSE_MAC_SIZE);
Acked-by: Neil Armstrong narmstrong@baylibre.com