Now that DM_ETH is enabled by default, there is no point in keeping the non-DM_ETH code which initialized the ethernet interfaces.
Signed-off-by: Ioana Ciornei ioana.ciornei@nxp.com --- board/freescale/ls2080ardb/eth_ls2080rdb.c | 95 ---------------------- board/freescale/ls2080ardb/ls2080ardb.c | 2 +- 2 files changed, 1 insertion(+), 96 deletions(-)
diff --git a/board/freescale/ls2080ardb/eth_ls2080rdb.c b/board/freescale/ls2080ardb/eth_ls2080rdb.c index 7034bc6e5d21..44d9782d729f 100644 --- a/board/freescale/ls2080ardb/eth_ls2080rdb.c +++ b/board/freescale/ls2080ardb/eth_ls2080rdb.c @@ -4,104 +4,13 @@ * */
-#include <common.h> -#include <command.h> -#include <net.h> -#include <netdev.h> -#include <malloc.h> -#include <fsl_mdio.h> -#include <miiphy.h> -#include <phy.h> -#include <fm_eth.h> -#include <asm/global_data.h> -#include <asm/io.h> #include <exports.h> -#include <asm/arch/fsl_serdes.h> #include <fsl-mc/fsl_mc.h> -#include <fsl-mc/ldpaa_wriop.h>
DECLARE_GLOBAL_DATA_PTR;
int board_eth_init(struct bd_info *bis) { -#ifndef CONFIG_DM_ETH -#if defined(CONFIG_FSL_MC_ENET) - int i, interface; - struct memac_mdio_info mdio_info; - struct mii_dev *dev; - struct ccsr_gur *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR); - u32 srds_s1; - struct memac_mdio_controller *reg; - - srds_s1 = in_le32(&gur->rcwsr[28]) & - FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK; - srds_s1 >>= FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT; - - reg = (struct memac_mdio_controller *)CFG_SYS_FSL_WRIOP1_MDIO1; - mdio_info.regs = reg; - mdio_info.name = DEFAULT_WRIOP_MDIO1_NAME; - - /* Register the EMI 1 */ - fm_memac_mdio_init(bis, &mdio_info); - - reg = (struct memac_mdio_controller *)CFG_SYS_FSL_WRIOP1_MDIO2; - mdio_info.regs = reg; - mdio_info.name = DEFAULT_WRIOP_MDIO2_NAME; - - /* Register the EMI 2 */ - fm_memac_mdio_init(bis, &mdio_info); - - switch (srds_s1) { - case 0x2A: - wriop_set_phy_address(WRIOP1_DPMAC1, 0, CORTINA_PHY_ADDR1); - wriop_set_phy_address(WRIOP1_DPMAC2, 0, CORTINA_PHY_ADDR2); - wriop_set_phy_address(WRIOP1_DPMAC3, 0, CORTINA_PHY_ADDR3); - wriop_set_phy_address(WRIOP1_DPMAC4, 0, CORTINA_PHY_ADDR4); - wriop_set_phy_address(WRIOP1_DPMAC5, 0, AQ_PHY_ADDR1); - wriop_set_phy_address(WRIOP1_DPMAC6, 0, AQ_PHY_ADDR2); - wriop_set_phy_address(WRIOP1_DPMAC7, 0, AQ_PHY_ADDR3); - wriop_set_phy_address(WRIOP1_DPMAC8, 0, AQ_PHY_ADDR4); - - break; - case 0x4B: - wriop_set_phy_address(WRIOP1_DPMAC1, 0, CORTINA_PHY_ADDR1); - wriop_set_phy_address(WRIOP1_DPMAC2, 0, CORTINA_PHY_ADDR2); - wriop_set_phy_address(WRIOP1_DPMAC3, 0, CORTINA_PHY_ADDR3); - wriop_set_phy_address(WRIOP1_DPMAC4, 0, CORTINA_PHY_ADDR4); - - break; - default: - printf("SerDes1 protocol 0x%x is not supported on LS2080aRDB\n", - srds_s1); - break; - } - - for (i = WRIOP1_DPMAC1; i <= WRIOP1_DPMAC4; i++) { - interface = wriop_get_enet_if(i); - switch (interface) { - case PHY_INTERFACE_MODE_XGMII: - dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO1_NAME); - wriop_set_mdio(i, dev); - break; - default: - break; - } - } - - for (i = WRIOP1_DPMAC5; i <= WRIOP1_DPMAC8; i++) { - switch (wriop_get_enet_if(i)) { - case PHY_INTERFACE_MODE_XGMII: - dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO2_NAME); - wriop_set_mdio(i, dev); - break; - default: - break; - } - } - - cpu_eth_init(bis); -#endif /* CONFIG_FSL_MC_ENET */ -#endif /* !CONFIG_DM_ETH */
#ifdef CONFIG_PHY_AQUANTIA /* @@ -116,11 +25,7 @@ int board_eth_init(struct bd_info *bis) gd->jt->miiphy_set_current_dev = miiphy_set_current_dev; #endif
-#ifdef CONFIG_DM_ETH return 0; -#else - return pci_eth_init(bis); -#endif }
#if defined(CONFIG_RESET_PHY_R) diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c index aa2d65b45b89..a7fc2b207660 100644 --- a/board/freescale/ls2080ardb/ls2080ardb.c +++ b/board/freescale/ls2080ardb/ls2080ardb.c @@ -297,7 +297,7 @@ int board_init(void) out_le32(irq_ccsr + IRQCR_OFFSET / 4, AQR405_IRQ_MASK); #endif
-#if !defined(CONFIG_SYS_EARLY_PCI_INIT) && defined(CONFIG_DM_ETH) +#if !defined(CONFIG_SYS_EARLY_PCI_INIT) pci_init(); #endif