Enable pinctrl for sdmmc and sdhci in SPL to support loading of FIT image from SD and eMMC storage when booting from SPI NOR flash.
Signed-off-by: Jonas Karlman jonas@kwiboo.se Reviewed-by: Kever Yang kever.yang@rock-chips.com --- v2: - Use bootph-all in pinctrl nodes - Reorder nodes alphabetically - Collect r-b tag
arch/arm/dts/rk3566-radxa-cm3-io-u-boot.dtsi | 56 ++++++++++++++++++++ configs/radxa-cm3-io-rk3566_defconfig | 3 +- 2 files changed, 58 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/rk3566-radxa-cm3-io-u-boot.dtsi b/arch/arm/dts/rk3566-radxa-cm3-io-u-boot.dtsi index a8c31fecafd8..f91740c1c0c8 100644 --- a/arch/arm/dts/rk3566-radxa-cm3-io-u-boot.dtsi +++ b/arch/arm/dts/rk3566-radxa-cm3-io-u-boot.dtsi @@ -11,11 +11,67 @@ }; };
+&emmc_bus8 { + bootph-all; +}; + +&emmc_clk { + bootph-all; +}; + +&emmc_cmd { + bootph-all; +}; + +&emmc_datastrobe { + bootph-all; +}; + +&pinctrl { + bootph-all; +}; + +&pcfg_pull_none { + bootph-all; +}; + +&pcfg_pull_up_drv_level_2 { + bootph-all; +}; + +&pcfg_pull_up { + bootph-all; +}; + +&sdmmc0_bus4 { + bootph-all; +}; + +&sdmmc0_clk { + bootph-all; +}; + +&sdmmc0_cmd { + bootph-all; +}; + +&sdmmc0_det { + bootph-all; +}; + +&sdmmc0_pwren { + bootph-all; +}; + &sdhci { cap-mmc-highspeed; mmc-ddr-1_8v; };
+&uart2m0_xfer { + bootph-all; +}; + &uart2 { clock-frequency = <24000000>; bootph-all; diff --git a/configs/radxa-cm3-io-rk3566_defconfig b/configs/radxa-cm3-io-rk3566_defconfig index dfaacbc8839e..dd1dd36a59b7 100644 --- a/configs/radxa-cm3-io-rk3566_defconfig +++ b/configs/radxa-cm3-io-rk3566_defconfig @@ -46,7 +46,7 @@ CONFIG_CMD_REGULATOR=y # CONFIG_SPL_DOS_PARTITION is not set CONFIG_SPL_OF_CONTROL=y CONFIG_OF_LIVE=y -CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" CONFIG_SPL_REGMAP=y CONFIG_SPL_SYSCON=y CONFIG_SPL_CLK=y @@ -63,6 +63,7 @@ CONFIG_ETH_DESIGNWARE=y CONFIG_GMAC_ROCKCHIP=y CONFIG_PHY_ROCKCHIP_INNO_USB2=y CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y +CONFIG_SPL_PINCTRL=y CONFIG_DM_PMIC=y CONFIG_PMIC_RK8XX=y CONFIG_REGULATOR_RK8XX=y