Re: [U-Boot] how to get u-boot code with arm64: core support

Hi, sharma:

Not the u-boot.bin, only u-boot: ./Foundation_v8 --image ./u-boot --cores=4 --no-secure-memory

FVP model print: Simulation is started

Then not run further.

Based on arm open source firmware doc, should use Foundation_v8 as below format: ./Foundation_v8 \ --cores=4 \ --no-secure-memory \ --visualization \ --gicv3 \ --data="<path to bl1.bin>"@0x0 \ --data="<path to UEFI binary>"@0x8000000 \

After compiled u-boot source code, there are 3 u-boot bin files: u-boot : 1.4MB u-boot.bin : 205KB u-boot.elf : 270KB

So, we should use u-boot? Not u-boot.bin?

Best wishes,