Hello Tom,
Am 13.08.2015 um 15:17 schrieb Tom Rini:
On Mon, Jun 29, 2015 at 09:10:48AM +0200, Heiko Schocher wrote:
add support for the at91sam9260 based board smartweb from siemens. SPL is used without serial support, as this SoC has only 4k sram for running SPL. Here a U-Boot bootlog:
RomBOOT
U-Boot 2015.07-rc2-00109-g4ae828c (Jun 15 2015 - 09:31:16 +0200)
CPU: AT91SAM9260 Crystal frequency: 18.432 MHz CPU clock : 198.656 MHz Master clock : 99.328 MHz Watchdog enabled DRAM: 64 MiB WARNING: Caches not enabled NAND: 256 MiB In: serial Out: serial Err: serial Net: macb0 Hit any key to stop autoboot: 0 U-Boot>
Signed-off-by: Heiko Schocher hs@denx.de
Applied to u-boot/master, thanks!
Thanks!
@Andreas: Do you find time for my other at91 board patches pending?
Here my current open patches list (except the at91 dfu support patches)
Patchwork [U-Boot] arm, at91: add axm extensions https://patchwork.ozlabs.org/patch/484257/
------------------------------------ corvus:
Patchwork [U-Boot] corvus, dfu: add dfu support https://patchwork.ozlabs.org/patch/484261/
Patchwork [U-Boot] at91: corvus: board updates https://patchwork.ozlabs.org/patch/484262/
------------------------------------ taurus:
Patchwork [U-Boot] taurus: board updates https://patchwork.ozlabs.org/patch/484292/
bye, Heiko