Signed-off-by: Michael Schwingen michael@schwingen.org --- board/actux1/actux1.c | 22 +++++++++++--------- board/actux1/config.mk | 7 +---- board/actux1/u-boot.lds | 42 +++++++++++++++++++++++++++------------ boards.cfg | 5 +++- include/configs/actux1.h | 48 +++++++++++++++++++++++++++------------------ 5 files changed, 76 insertions(+), 48 deletions(-)
diff --git a/board/actux1/actux1.c b/board/actux1/actux1.c index 399be23..c56ec94 100644 --- a/board/actux1/actux1.c +++ b/board/actux1/actux1.c @@ -42,6 +42,17 @@
DECLARE_GLOBAL_DATA_PTR;
+int board_early_init_f (void) +{ + /* CS5: Debug port */ + *IXP425_EXP_CS5 = 0x9d520003; + /* CS6: HwRel */ + *IXP425_EXP_CS6 = 0x81860001; + /* CS7: LEDs */ + *IXP425_EXP_CS7 = 0x80900003; + return 0; +} + int board_init (void) { gd->bd->bi_arch_number = MACH_TYPE_ACTUX1; @@ -61,13 +72,6 @@ int board_init (void) GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_EXTBUS_CLK); *IXP425_GPIO_GPCLKR = 0x011001FF;
- /* CS5: Debug port */ - *IXP425_EXP_CS5 = 0x9d520003; - /* CS6: HwRel */ - *IXP425_EXP_CS6 = 0x81860001; - /* CS7: LEDs */ - *IXP425_EXP_CS7 = 0x80900003; - udelay (533); GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_IORST);
@@ -116,9 +120,7 @@ u32 get_board_rev (void)
int dram_init (void) { - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - + gd->ram_size = PHYS_SDRAM_1_SIZE; return (0); }
diff --git a/board/actux1/config.mk b/board/actux1/config.mk index 88634f7..a370337 100644 --- a/board/actux1/config.mk +++ b/board/actux1/config.mk @@ -1,6 +1,3 @@ -CONFIG_SYS_TEXT_BASE = 0x00e00000 - -# include NPE ethernet driver -BOARDLIBS = arch/arm/cpu/ixp/npe/libnpe.o - LDSCRIPT := $(SRCTREE)/board/$(BOARDDIR)/u-boot.lds +PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections +PLATFORM_LDFLAGS += --gc-sections diff --git a/board/actux1/u-boot.lds b/board/actux1/u-boot.lds index 5c1ece7..6809ef7 100644 --- a/board/actux1/u-boot.lds +++ b/board/actux1/u-boot.lds @@ -30,15 +30,15 @@ SECTIONS
. = ALIGN (4); .text : { - arch/arm/cpu/ixp/start.o(.text) - lib/string.o(.text) - lib/vsprintf.o(.text) - arch/arm/lib/board.o(.text) - common/dlmalloc.o(.text) - arch/arm/cpu/ixp/cpu.o(.text) + arch/arm/cpu/ixp/start.o(.text*) + net/libnet.o(.text*) + board/actux1/libactux1.o(.text*) + arch/arm/cpu/ixp/libixp.o(.text*) + drivers/serial/libserial.o(.text*) + . = env_offset; common/env_embedded.o(.ppcenv) - * (.text) + *(.text*) }
. = ALIGN (4); @@ -47,7 +47,7 @@ SECTIONS } . = ALIGN (4); .data : { - *(.data) + *(.data*) } . = ALIGN (4); .got : { @@ -61,10 +61,26 @@ SECTIONS __u_boot_cmd_end =.;
. = ALIGN (4); - __bss_start =.; - .bss (NOLOAD): { - *(.bss) - . = ALIGN(4); + .rel.dyn : { + __rel_dyn_start = .; + *(.rel*) + __rel_dyn_end = .; + } + + .dynsym : { + __dynsym_start = .; + *(.dynsym) + } + + .bss __rel_dyn_start (OVERLAY) : { + __bss_start = .; + *(.bss*) + . = ALIGN(4); + _end = .; } - _end =.; + /DISCARD/ : { *(.dynstr*) } + /DISCARD/ : { *(.dynamic*) } + /DISCARD/ : { *(.plt*) } + /DISCARD/ : { *(.interp*) } + /DISCARD/ : { *(.gnu*) } } diff --git a/boards.cfg b/boards.cfg index 94b8745..695baca 100644 --- a/boards.cfg +++ b/boards.cfg @@ -122,7 +122,10 @@ omap4_panda arm armv7 panda ti omap4_sdp4430 arm armv7 sdp4430 ti omap4 s5p_goni arm armv7 goni samsung s5pc1xx smdkc100 arm armv7 smdkc100 samsung s5pc1xx -actux1 arm ixp +actux1_4_16 arm ixp actux1 - - actux1:FLASH2X2 +actux1_8_16 arm ixp actux1 - - actux1:FLASH1X8 +actux1_4_32 arm ixp actux1 - - actux1:FLASH2X2,RAM_32MB +actux1_8_32 arm ixp actux1 - - actux1:FLASH1X8,RAM_32MB actux2 arm ixp actux3 arm ixp actux4 arm ixp diff --git a/include/configs/actux1.h b/include/configs/actux1.h index 8886eff..2ffedf1 100644 --- a/include/configs/actux1.h +++ b/include/configs/actux1.h @@ -26,13 +26,6 @@ #ifndef __CONFIG_H #define __CONFIG_H
-/* 1: modified board with 32MB DRAM */ -#define CONFIG_ACTUX1_32MB 0 -/* 1: 2*2MB FLASH (standard) */ -#define CONFIG_ACTUX1_FLASH2X2 1 -/* 1: 1*8MB FLASH (upgraded boards) */ -#define CONFIG_ACTUX1_FLASH1X8 0 - #define CONFIG_IXP425 1 #define CONFIG_ACTUX1 1
@@ -44,6 +37,7 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTDELAY 3 #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_BOARD_EARLY_INIT_F 1
/*************************************************************** * U-boot generic defines start here. @@ -54,7 +48,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -/* size in bytes reserved for initial data */
/* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE @@ -63,8 +56,8 @@ #include <config_cmd_default.h>
#define CONFIG_CMD_ELF -#undef CONFIG_CMD_PCI -#undef CONFIG_PCI +//!#undef CONFIG_CMD_PCI +//!#undef CONFIG_PCI
#define CONFIG_BOOTCOMMAND "run boot_flash" /* enable passing of ATAGs */ @@ -94,8 +87,9 @@ #define CONFIG_SYS_MEMTEST_START 0x00400000 #define CONFIG_SYS_MEMTEST_END 0x00800000
-/* spec says 66.666 MHz, but it appears to be 33 */ -#define CONFIG_SYS_HZ 3333333 +/* timer clock - 2* OSC_IN system clock */ +#define CONFIG_IXP425_TIMER_CLK 66666666 +#define CONFIG_SYS_HZ 1000
/* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x00010000 @@ -121,9 +115,9 @@ /* SDRAM settings */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 0x00000000 -#define CONFIG_SYS_DRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#if CONFIG_ACTUX1_32MB +#ifdef CONFIG_RAM_32MB # define CONFIG_SYS_SDR_CONFIG 0x18 # define PHYS_SDRAM_1_SIZE 0x02000000 # define CONFIG_SYS_SDRAM_REFRESH_CNT 0x81a @@ -137,8 +131,11 @@ # define CONFIG_SYS_DRAM_SIZE 0x01000000 #endif
+ + /* FLASH organization */ -#if CONFIG_ACTUX1_FLASH2X2 +#define CONFIG_SYS_TEXT_BASE 0x50000000 +#ifdef CONFIG_FLASH2X2 # define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of sectors on one chip */ # define CONFIG_SYS_MAX_FLASH_SECT 40 @@ -146,7 +143,7 @@ # define PHYS_FLASH_2 0x50200000 # define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 } #endif -#if CONFIG_ACTUX1_FLASH1X8 +#ifdef CONFIG_FLASH1X8 # define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of sectors on one chip */ # define CONFIG_SYS_MAX_FLASH_SECT 140 @@ -173,12 +170,16 @@ #define CONFIG_NET_MULTI 1 /* NPE0 PHY address */ #define CONFIG_PHY_ADDR 0 +/* NPE1 PHY address (HW Release E only) */ +#define CONFIG_PHY1_ADDR 1 /* MII PHY management */ #define CONFIG_MII 1 /* Number of ethernet rx buffers & descriptors */ #define CONFIG_SYS_RX_ETH_BUFFER 16 #define CONFIG_RESET_PHY_R 1
+#define CONFIG_HAS_ETH1 1 + #define CONFIG_CMD_DHCP #define CONFIG_CMD_NET #define CONFIG_CMD_MII @@ -203,17 +204,19 @@ #define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x4000) #define CONFIG_SYS_USE_PPCENV 1
-#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CONFIG_EXTRA_ENV_SETTINGS \ "npe_ucode=50040000\0" \ "mtd=IXP4XX-Flash.0:256k(uboot),64k(ucode),1152k(linux),-(root)\0" \ "kerneladdr=50050000\0" \ + "kernelfile=actux1/uImage\0" \ + "rootfile=actux1/rootfs\0" \ "rootaddr=50170000\0" \ "loadaddr=10000\0" \ "updateboot_ser=mw.b 10000 ff 40000;" \ " loady ${loadaddr};" \ " run eraseboot writeboot\0" \ "updateboot_net=mw.b 10000 ff 40000;" \ - " tftp ${loadaddr} u-boot.bin;" \ + " tftp ${loadaddr} actux1/u-boot.bin;" \ " run eraseboot writeboot\0" \ "eraseboot=protect off 50000000 50003fff;" \ " protect off 50006000 5003ffff;" \ @@ -223,6 +226,9 @@ " cp.b 16000 50006000 3a000\0" \ "eraseenv=protect off 50004000 50005fff;" \ " erase 50004000 50005fff\0" \ + "updateucode=loady;" \ + " era ${npe_ucode} +${filesize};" \ + " cp.b ${loadaddr} ${npe_ucode} ${filesize}\0" \ "updateroot=tftp ${loadaddr} ${rootfile};" \ " era ${rootaddr} +${filesize};" \ " cp.b ${loadaddr} ${rootaddr} ${filesize}\0" \ @@ -233,7 +239,7 @@ " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \ "netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \ " rootfstype=squashfs,jffs2 init=/etc/preinit\0" \ - "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0" \ "addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0" \ "boot_flash=run flashargs addtty addeth;" \ " bootm ${kerneladdr}\0" \ @@ -241,4 +247,8 @@ " tftpboot ${loadaddr} ${kernelfile};" \ " bootm\0"
+/* additions for new relocation code, must be added to all boards */ +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) + #endif /* __CONFIG_H */