Re: [U-Boot] common/xyzmodem.c, ymodem, slow behavior receiving bytes

Dear Angelo,

In message 20121123225721.GA28751@angel3 you wrote:

i have found out that this issue was also and probably mainly caused from the issue fixed in my last patch posted:

http://patchwork.ozlabs.org/patch/201421/

All serial driver routines (for mcfuart.c in my case) was executed from the flash memory, even after monitor relocation to ram.

Considering flash memory access time (10 wait states set in my case), this was causing code execution speed to be dramatically slow, near the limit for receiving at 115200 uart speed.

Enabling cache for the sdram fasted up a bit the operations and solved the issue, but main problem here was certainly the execution from flash.

Thanks for following up on this!

Best regards,

Wolfgang Denk