Add static struct eth_ops and set ops function pointers statically. Remove setting eth_ops members dynamically.
This is a step toward converting the driver for DM.
Signed-off-by: Tomas Hlavacek tmshlvck@gmail.com --- drivers/net/davinci_emac.c | 14 +++++++++----- 1 files changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index a221092..5701f75 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -769,6 +769,14 @@ static int davinci_eth_rcv_packet (struct eth_device *dev) return (0); }
+static struct eth_ops davinci_emac_ops = { + .init = davinci_eth_open, + .halt = davinci_eth_close, + .send = davinci_eth_send_packet, + .recv = davinci_eth_rcv_packet, + .write_hwaddr = davinci_eth_set_mac_addr +}; + /* * This function initializes the emac hardware. It does NOT initialize * EMAC modules power or pin multiplexors, that is done by board_init() @@ -791,11 +799,7 @@ int davinci_emac_initialize(void) sprintf(dev->name, "DaVinci-EMAC");
dev->iobase = 0; - dev->eo->init = davinci_eth_open; - dev->eo->halt = davinci_eth_close; - dev->eo->send = davinci_eth_send_packet; - dev->eo->recv = davinci_eth_rcv_packet; - dev->eo->write_hwaddr = davinci_eth_set_mac_addr; + dev->eo = &davinci_emac_ops;
eth_register(dev);