Hi Jayadev,
Hello all,
I am currently trying to bring up Xen on OMAP5432. When I try to boot the board it shows
*Starting kernel ...- UART enabled -- CPU 00000000 booting -- Xen must be entered in NS Hyp mode -- Please update the bootloader -- Boot failed -* After applying the below patch , the boot CPU started loading.
diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S index 86c0e42..696da4b 100644 --- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S @@ -19,7 +19,20 @@ ENTRY(save_boot_params) ldr r1, =OMAP_SRAM_SCRATCH_BOOT_PARAMS str r0, [r1] +/*
- Turn on hypervisor mode on CPU#0
- */
+#ifdef CONFIG_DRA7XX_HYPERVISOR_ON
- mov r0, lr @ This is a great place to switch into hyp
mode
@ only the r0 was needed from _start and is now@ free; all other general purpose registers were@ already free.- ldr r12, =0x102 @ Set PL310 control register - value in R0
- .word 0xe1600070 @ SMC #0 - hand assembled because
-march=armv5
@ call ROM Code API to set control register+#else bx lr +#endif /* CONFIG_DRA7XX_HYPERVISOR_ON */ ENDPROC(save_boot_params) ENTRY(set_pl310_ctrl_reg)
However now the secondary CPUs fail to load;
*(XEN) Bringing up CPU1- CPU 00000001 booting -- Xen must be entered in NS Hyp mode -- Please update the bootloader -- Boot failed -* Can someone provide the proper U-boot changes required to load the CPUs in HYP mode
Maybe between your patch (at the very beginning of boot up) and the time XEN wants to re-enable second CPU there is a switch from HYP to SVC mode?
Please keep in mind that u-boot works with single core - and this single core execution mode is passed to XEN.
Thanks and Regards _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de