-----Original Message----- From: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi- powergrids.com> Sent: Tuesday, January 19, 2021 4:11 PM To: Priyanka Jain (OSS) priyanka.jain@oss.nxp.com; u-boot@lists.denx.de Cc: Valentin Longchamp valentin.longchamp@hitachi-powergrids.com; Holger Brunck holger.brunck@hitachi-powergrids.com; Rainer Boschung rainer.boschung@hitachi-powergrids.com; Matteo Ghidoni matteo.ghidoni@hitachi-powergrids.com Subject: Subject: [PATCH v2 4/4] board/km: add support for seli8 design based on nxp ls102x
The SELI8 design is a new tdm service unit card for Hitachi-Powergrids XMC and FOX product lines.
It is based on NXP LS1021 SoC and it provides following interfaces:
- IFC interface for NOR, NAND and external FPGA's
- 1 x RGMII ETH for debug purposes
- 2 x SGMII ETH for management communication via back-plane
- 1 x uQE HDLC for management communication via back-plane
- 1 x I2C for peripheral devices
- 1 x SPI for peripheral devices
- 1 x UART for debug logging
It is foreseen that the design will be later re-used for another XMC and FOX service cards with similar SoC requirements.
Signed-off-by: Rainer Boschung rainer.boschung@hitachi-powergrids.com Signed-off-by: Matteo Ghidoni matteo.ghidoni@hitachi-powergrids.com Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi- powergrids.com>
<snip> Kindly fix below checkpatch errors /warnings WARNING: 'AYSNC' may be misspelled - perhaps 'ASYNC'? #799: FILE: include/configs/km/pg-wcom-ls102xa.h:64: + CSOR_NOR_NOR_MODE_AYSNC_NOR | \
ERROR: All commands are managed by Kconfig #953: FILE: include/configs/km/pg-wcom-ls102xa.h:218: +#define CONFIG_CMDLINE_TAG
total: 1 errors, 2 warnings, 0 checks, 964 lines checked
Regards Priyanka