From: Matthias Fuchs matthias.fuchs@esd-electronics.com
-strip unused features -fix resetting phy
Signed-off-by: Matthias Fuchs matthias.fuchs@esd.eu --- board/esd/du405/du405.c | 10 ++++++++-- include/configs/DU405.h | 14 ++++++-------- 2 files changed, 14 insertions(+), 10 deletions(-)
diff --git a/board/esd/du405/du405.c b/board/esd/du405/du405.c index 8a87d55..3bb34fd 100644 --- a/board/esd/du405/du405.c +++ b/board/esd/du405/du405.c @@ -191,10 +191,16 @@ int checkboard (void) *(volatile unsigned char *) FPGA_MODE_REG = 0xff; /* reset high active */ *(volatile unsigned char *) FPGA_MODE_REG = 0x00; /* low again */
+ return 0; +} + +void reset_phy(void) +{ +#if defined(CONFIG_LXT971_NO_SLEEP) + /* * Disable sleep mode in LXT971 */ lxt971_no_sleep(); - - return 0; +#endif } diff --git a/include/configs/DU405.h b/include/configs/DU405.h index 1d20efe..d1edd24 100644 --- a/include/configs/DU405.h +++ b/include/configs/DU405.h @@ -32,8 +32,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_IDENT_STRING " $Name: $" - #define CONFIG_405GP 1 /* This is a PPC405 CPU */ #define CONFIG_4xx 1 /* ...member of PPC4xx family */ #define CONFIG_DU405 1 /* ...on a DU405 board */ @@ -49,8 +47,6 @@ #undef CONFIG_BOOTARGS #define CONFIG_BOOTCOMMAND "bootm fff00000"
-#define CONFIG_PREBOOT /* enable preboot variable */ - #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
@@ -58,7 +54,9 @@ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ - +#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */ +#define CONFIG_NET_MULTI 1 +#undef CONFIG_HAS_ETH1
/* * BOOTP options @@ -74,14 +72,13 @@ */ #include <config_cmd_default.h>
-#define CONFIG_CMD_PCI -#define CONFIG_CMD_IRQ +#undef CONFIG_CMD_NFS #define CONFIG_CMD_IDE #define CONFIG_CMD_ELF #define CONFIG_CMD_MII #define CONFIG_CMD_DATE #define CONFIG_CMD_EEPROM - +#define CONFIG_CMD_I2C
#define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -214,6 +211,7 @@ /*----------------------------------------------------------------------- * I2C EEPROM (CAT24WC08) for environment */ +#define CONFIG_I2C_CMD_TREE 1 #define CONFIG_HARD_I2C /* I2c with hardware support */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F