Hi Fawaz,
On Sunday 13 March 2011 17:20:31 Fawaz wrote:
This Patch adds another build target for the AMCC Canyonlands[PPC460Ex] eval board, this target can be used to do NAND flash or NOR flash programming in a virgin board using u-boot commands. Using JTAG debugger(e.g. BDI2000/3000) configured to setup the SDRAM. here are TLB entries required to load RAM-u-boot (for BDI2000/3000): WTLB 0x00000095 0x0000003F ;SDRAM 256MB @ 0x00000000 WTLB 0xE1000005 0x4E10001B
do SDRAM configuration. Then do the following usin JTAG emulator: 460EX>load 0x01000000 u-boot.bin bin 460EX>go
This patch is still line-wrapped. I tried to manually fix this, but it's quite complex and could introduce some errors. So, please fix this in your mailer, or even better, use "git send-email" to send your patches.
Thanks.
Cheers, Stefan
-- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office@denx.de