Andre Schwarz wrote:
Wolfgang,
of course I meant no offense - of course your patch is harmless.
No problem.
The System (network camera) is running for nearly 2 years now. Last working version has been u-boot 1.2.x with a 2.6.19 kernel.
Since we've moved to the latest kernel we need a more recent u-boot.
This is what I did - and e1000 no longer works.
Of course I diff'ed the network stuff - no obvious changes at all. So I wonder if the problem is elsewhere and if e1000 is still working in general.
Have you read my previous mail? See below.
Wolfgang Grandegger schrieb:
Andre Schwarz wrote:
Wolfgang,
as far as I can see on the list you sent the latest patches for the e1000 driver.
My patches just added some device ids,
My e1000 (82541ER) stopped working on a MPC5200 based board with latest u-boot. I have a similar problem on another board ...
Is your e1000 working properly on the latest u-boot ?
Yes, on a MPC8548 board. I have not tested it on the MPC5200.
Do I need any additional defines or environment settings to get it working again ?
Obviously it is - again :-[ - my fault or is related to my build system.
I think there are some known problems with PCI on boards with a MPC5200 Rev. A processor, e.g. my EEPRO100 card does not work on it. What exactly does not work?
More information could be useful.
Wolfgang.