Hi Jens,
Have you tried to pass the "jtag=on" option into the kernel command line?
Regards,
Fabio Estevam
--- On Wed, 5/14/08, Jens Gehrlein sew_s@tqs.de wrote:
From: Jens Gehrlein sew_s@tqs.de Subject: Re: [U-Boot-Users] Loading a kernel on MX31ADS using U-boot To: "Guennadi Liakhovetski" g.liakhovetski@gmx.de Cc: u-boot-users@lists.sourceforge.net Date: Wednesday, May 14, 2008, 4:08 AM Hi Guennadi,
Guennadi Liakhovetski schrieb:
...
Apart from that, verify that your console=
command line parameter is correct, your machine ID
matches, and that you
don't have a jtag debugger like bdi2000 connected
when you're trying to
boot.
I have the same problem on our board: I don't see the console outputs if the BDI2000 cable is connected to the target, although the BDI is in mode "reset run". Do have an idea why?
Best Regards, Jens
This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users