Hi,
On 10/11/2014 05:40 PM, Ian Campbell wrote:
On Mon, 2014-10-06 at 19:57 +0200, Hans de Goede wrote:
Note we also drop the SPL check for initializing the 2nd mmc slot, the SPL check is not necessary with Kconfig, because only options explicitly marked as also being for the SPL get set during SPL builds.
Signed-off-by: Hans de Goede hdegoede@redhat.com
board/sunxi/Kconfig | 8 ++++++++ board/sunxi/board.c | 2 +- 2 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index 497b093..cb4a881 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -32,6 +32,14 @@ config USB_KEYBOARD Say Y here to add support for using a USB keyboard (typically used in combination with a graphical console on HDMI).
+config MMC_SUNXI_SLOT_EXTRA
- int "mmc extra slot number"
- default -1
- ---help---
- sunxi builds always enable mmc0, some boards also have a sdcard slot
- or emmc on mmc2 or mmc3. Setting this to 2 or 3 will enable support
- for this.
What happened to mmc1?
When writing this I was under the assumption that nothing was actually using mmc1, I will fix the help text.
Regardless:
Acked-by: Ian Campbell ijc@hellion.org.uk
Regards,
Hans