Signed-off-by: Jean-Jacques Hiblot jjhiblot@ti.com ---
Changes in v8: None Changes in v7: None Changes in v6: None Changes in v5: None Changes in v4: None Changes in v3: None Changes in v2: None
board/ti/dra7xx/evm.c | 105 -------------------------------------------------- 1 file changed, 105 deletions(-)
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c index 9f78adc..d69641e 100644 --- a/board/ti/dra7xx/evm.c +++ b/board/ti/dra7xx/evm.c @@ -915,111 +915,6 @@ const struct mmc_platform_fixups *platform_fixups_mmc(uint32_t addr) } #endif
-#if defined(CONFIG_USB_DWC3) && \ - !(defined(CONFIG_DM_USB) && defined(CONFIG_DM_USB_DEV)) -static struct dwc3_device usb_otg_ss1 = { - .maximum_speed = USB_SPEED_SUPER, - .base = DRA7_USB_OTG_SS1_BASE, - .tx_fifo_resize = false, - .index = 0, -}; - -static struct dwc3_omap_device usb_otg_ss1_glue = { - .base = (void *)DRA7_USB_OTG_SS1_GLUE_BASE, - .utmi_mode = DWC3_OMAP_UTMI_MODE_SW, - .index = 0, -}; - -static struct ti_usb_phy_device usb_phy1_device = { - .pll_ctrl_base = (void *)DRA7_USB3_PHY1_PLL_CTRL, - .usb2_phy_power = (void *)DRA7_USB2_PHY1_POWER, - .usb3_phy_power = (void *)DRA7_USB3_PHY1_POWER, - .index = 0, -}; - -static struct dwc3_device usb_otg_ss2 = { - .maximum_speed = USB_SPEED_SUPER, - .base = DRA7_USB_OTG_SS2_BASE, - .tx_fifo_resize = false, - .index = 1, -}; - -static struct dwc3_omap_device usb_otg_ss2_glue = { - .base = (void *)DRA7_USB_OTG_SS2_GLUE_BASE, - .utmi_mode = DWC3_OMAP_UTMI_MODE_SW, - .index = 1, -}; - -static struct ti_usb_phy_device usb_phy2_device = { - .usb2_phy_power = (void *)DRA7_USB2_PHY2_POWER, - .index = 1, -}; - -int board_usb_init(int index, enum usb_init_type init) -{ - enable_usb_clocks(index); - switch (index) { - case 0: - if (init == USB_INIT_DEVICE) { - usb_otg_ss1.dr_mode = USB_DR_MODE_PERIPHERAL; - usb_otg_ss1_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID; - } else { - usb_otg_ss1.dr_mode = USB_DR_MODE_HOST; - usb_otg_ss1_glue.vbus_id_status = OMAP_DWC3_ID_GROUND; - } - - ti_usb_phy_uboot_init(&usb_phy1_device); - dwc3_omap_uboot_init(&usb_otg_ss1_glue); - dwc3_uboot_init(&usb_otg_ss1); - break; - case 1: - if (init == USB_INIT_DEVICE) { - usb_otg_ss2.dr_mode = USB_DR_MODE_PERIPHERAL; - usb_otg_ss2_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID; - } else { - usb_otg_ss2.dr_mode = USB_DR_MODE_HOST; - usb_otg_ss2_glue.vbus_id_status = OMAP_DWC3_ID_GROUND; - } - - ti_usb_phy_uboot_init(&usb_phy2_device); - dwc3_omap_uboot_init(&usb_otg_ss2_glue); - dwc3_uboot_init(&usb_otg_ss2); - break; - default: - printf("Invalid Controller Index\n"); - } - - return 0; -} - -int board_usb_cleanup(int index, enum usb_init_type init) -{ - switch (index) { - case 0: - case 1: - ti_usb_phy_uboot_exit(index); - dwc3_uboot_exit(index); - dwc3_omap_uboot_exit(index); - break; - default: - printf("Invalid Controller Index\n"); - } - disable_usb_clocks(index); - return 0; -} - -int usb_gadget_handle_interrupts(int index) -{ - u32 status; - - status = dwc3_omap_uboot_interrupt_status(index); - if (status) - dwc3_uboot_handle_interrupt(index); - - return 0; -} -#endif - #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_OS_BOOT) int spl_start_uboot(void) {