We want to use Kconfig logic to depend on whether pl01x devices are built in, so let's convert their inclusion selection to Kconfig.
This round goes to pl010.
Signed-off-by: Alexander Graf agraf@suse.de --- arch/arm/Kconfig | 1 + drivers/serial/Kconfig | 6 ++++++ include/configs/edb93xx.h | 1 - scripts/config_whitelist.txt | 1 - 4 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index f6d57f5505..97b8249432 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -348,6 +348,7 @@ config ARCH_AT91 config TARGET_EDB93XX bool "Support edb93xx" select CPU_ARM920T + select PL010_SERIAL
config TARGET_ASPENITE bool "Support aspenite" diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 7b20b47964..2816121dec 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -447,6 +447,12 @@ config INTEL_MID_SERIAL Select this to enable a UART for Intel MID platforms. This uses the ns16550 driver as a library.
+config PL010_SERIAL + bool "ARM PL010 driver" + depends on !DM_SERIAL + help + Select this to enable a UART for platforms using PL010. + config ROCKCHIP_SERIAL bool "Rockchip on-chip UART support" depends on DM_SERIAL && SPL_OF_PLATDATA diff --git a/include/configs/edb93xx.h b/include/configs/edb93xx.h index 8fcc791ab4..fcad7c46dd 100644 --- a/include/configs/edb93xx.h +++ b/include/configs/edb93xx.h @@ -80,7 +80,6 @@ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
/* Serial port hardware configuration */ -#define CONFIG_PL010_SERIAL #define CONFIG_CONS_INDEX 0 #define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, \ 115200, 230400} diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index c98f262079..5ee6b07c6d 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -1626,7 +1626,6 @@ CONFIG_PIXIS_BRDCFG1_SSI_TDM_MASK CONFIG_PIXIS_BRDCFG1_SSI_TDM_SSI CONFIG_PIXIS_BRDCFG1_TDM CONFIG_PIXIS_SGMII_CMD -CONFIG_PL010_SERIAL CONFIG_PL011_CLOCK CONFIG_PL011_SERIAL CONFIG_PL011_SERIAL_RLCR