On Mon, Jun 7, 2010 at 08:44, Wolfgang Denk wd@denx.de wrote:
Dear jackfriend,
In message 39c3dad3.3bd4.12910469457.Coremail.jackfriend@163.com you wrote:
How can I use yaffs2 in uboot
You have to use absolute path with all commands. eg "yls /flash/" This path must match your mount points as configured in fs/yaffs/yaffscfg.c
my2440 # ywrm a 0x30008000 40000
Error opening file: -1
Maybe you try a "yls" first to check which files are present in your file system. Then test if read accesses are working. I'm not sure if write mode has been tested (or even implemented).
Write mode is in use and working.
Best regards William Juul
Also, it might make sense to enable YAFFS2_DEBUG while testing.
Best regards,
Wolfgang Denk
-- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de "It is better to have tried and failed than to have failed to try, but the result's the same." - Mike Dennison _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot