make mx28evk_config? board/freescale/mx28evk
Are you sure you checked it in? I checked, but I couldn't find it. (http://git.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=tree;f=include/config s;h=fe894c3b95e3d154264c2f8731b668c410131f01;hb=HEAD)
It's in u-boot-imx tree.
Yes, it can go both ways.
For the SoC I understand. But he PHYs on the Freescale don't, as far as I know. Anyway, the Denx module probably uses more advanced PHYs.
Different one, I dunno if it's more advanced or not.
The PHY doesn't supply clock on mx28evk, CPU does.
I'm glad we agree here.
Yea ...
M28EVK: PHY supplies clock to CPU MX28EVK: CPU supplies clock to PHY
It's getting rather obvious, now you've given me a bit of insight in the differences between both boards. Thanks.
You're welcome
Still, the support is already there.
I figured that too; I expected you probably made that first before moving on to the Denx module.
Fabio did (Cced), after DENX module was supported.
Please always Cc the mailing list etc.
But I couldn't find it. At first I thought m28evk_config would support it (too). The similarity in names suggests similarity in boards. But after patching too much code, I figured to implement mx28evk_config and board/freescale/mx28evk myself. What a waste of time.... At least it was a good exercise before our product boards arrive next week.
I just pulled my git repository and Make can't find a rule to make mx28evk_config, so it's really not there. Not even hidden in another configuration.
Wasn't it removed, since the Freescale implementation in 2009.08 broke?
No, see above.
M
Robert.